Identification of the micro-plasticity mechanisms at the origin of self-heating under cyclic loading with low stress amplitude
Source abstract
Abstract
Abstract The aim of the present work is to study the mechanisms at the origin of the two self-heating regimes under cyclic loading observed for stress amplitudes lower than the conventional yield stress. To achieve this objective, several different and complementary microscopic observation techniques have been performed: optical microscopy, Scanning Electron Microscopy (SEM) and Atomic Force Microscopy observations and Electron BackScatter Diffraction (EBSD) measurements have been carried out on the surface of several specimens after cyclic loading. All the results presented hereafter have been obtained on an HSLA ( i . e ., High Strength Low Alloy) commercial steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. The determination of fatigue limits under alternating stress conditions10.1098/rspa.1914.0066 ↗
2. Fatigue of metals under repeated stress
3. Fatigue limit evaluation of metals using an infrared thermographic technique10.1016/S0167-6636(97)00047-1 ↗
4. Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components10.1016/S0142-1123(99)00088-2 ↗
5. Thermographic investigation of the fatigue behavior of reactor pressure vessel steels10.1016/S0921-5093(00)01910-9 ↗
6. Rapid determination of the fatigue curve by the thermographic method10.1016/S0142-1123(01)00107-4 ↗
7. A new iteration method for the thermographic determination of fatigue limit in steels10.1016/j.ijfatigue.2003.12.009 ↗
8. Temperature evolution during fatigue damage10.1016/j.intermet.2004.07.032 ↗
9. Analysis of the fatigue strength of a stainless steel based on the energy dissipation10.1016/j.ijfatigue.2006.02.043 ↗
10. Dissipative aspects in high cycle fatigue10.1016/j.mechmat.2009.01.018 ↗
11. An energy method for rapid evaluation of high cycle fatigue parameters based on intrinsic dissipation10.1016/j.ijfatigue.2015.04.016 ↗
12. Fatigue limit evaluation of various martensitic stainless steels with new robust thermographic data analysis10.1016/j.ijfatigue.2014.12.010 ↗
13. Fast prediction of the Wohler curve from heat build-up measurements on short fiber reinforced plastic10.1016/j.ijfatigue.2012.09.007 ↗
14. Fast evaluation of the fatigue lifetime of rubber-like materials based on a heat build-up protocol and micro-tomography measurements
15. Calorimetric analysis of dissipative and thermoelastic effects associated with the fatigue behavior of steels10.1016/S0142-1123(03)00171-3 ↗
16. Local energy approach to steel fatigue10.1111/j.1475-1305.2007.00381.x ↗
17. Dissipated energy measurements as a marker of microstructural evolution: 316L and DP60010.1016/j.actamat.2011.03.034 ↗
18. Identification of the scatter in high cycle fatigue from temperature measurements10.1016/j.crme.2004.06.002 ↗
19. A probabilistic two-scale model for high cycle fatigue life predictions10.1111/j.1460-2695.2005.00854.x ↗
20. Influence of hardening type on self-heating of metallic materials under cyclic loadings at low amplitude10.1016/j.euromechsol.2008.08.002 ↗
21. Probabilistic multiscale models and measurements of self-heating under multiaxial high cycle fatigue10.1016/j.jmps.2010.01.003 ↗
22. Checking the fatigue limit from thermographic techniques by means of a probabilistic model of the epsilon-N field10.1016/j.ijfatigue.2011.02.008 ↗
23. Micromechanical modeling of the interactions between the microstructure and the dissipative deformation mechanisms in steels under cyclic loading10.1016/j.ijplas.2011.12.004 ↗
24. A new approach to characterizing and modeling the high cycle fatigue properties of cast materials based on self-heating measurements under cyclic loadings10.1016/j.ijfatigue.2012.09.005 ↗
25. Quantitative thermographic methodology for fatigue life assessment in a multiscale energy dissipation framework10.1016/j.ijfatigue.2015.08.015 ↗
26. A microplasticity evaluation method in very high cycle fatigue10.1016/j.ijfatigue.2016.09.004 ↗
27. Determination of high cycle fatigue properties of a wide range of steel sheet grades from self-heating measurements10.1016/j.ijfatigue.2014.01.004 ↗
28. A two-parameter, heat energy-based approach to analyse the mean stress influence on axial fatigue behaviour of plain steel specimens10.1016/j.ijfatigue.2015.07.028 ↗
29. Determination of a HCF criterion by thermal measurement under biaxial loading10.1016/j.ijfatigue.2006.06.009 ↗
30. Prediction of self-heating measurements under proportional and non-proportional multiaxial loadings10.1016/j.crme.2007.01.002 ↗
31. A very high cycle fatigue thermal dissipation investigation for titanium alloy TC410.1016/j.msea.2014.02.012 ↗
32. Thermal response of DP600 dual-phase steel under ultrasonic fatigue loading10.1016/j.msea.2016.09.025 ↗
33. Theoretical approach for developing the thermographic method in ultrasonic fatigue10.1016/j.prostr.2016.06.156 ↗
34. Self-heating measurements for a dual-phase steel under ultrasonic fatigue loading for stress amplitudes below the conventional fatigue limit10.1016/j.prostr.2016.06.152 ↗
35. A microplasticity evaluation method in very high cycle fatigue10.1016/j.ijfatigue.2016.09.004 ↗
36. Dissipative aspects in thermographic methods10.1111/j.1460-2695.2012.01701.x ↗
37. A model of extrusions and intrusions in fatigued metals II. Surface roughening by random irreversible slip10.1080/01418618608242897 ↗
38. Suresh · 1991
39. Factors influencing the mechanism of superlong fatigue failure in steels10.1046/j.1460-2695.1999.00187.x ↗
40. On the life-controlling microstructural fatigue mechanisms in ductile metals and alloys in the gigacycle regime10.1046/j.1460-2695.1999.00186.x ↗
41. Specific features and mechanisms of fatigue in the ultrahigh-cycle regime10.1016/j.ijfatigue.2005.05.018 ↗
42. Very high cycle fatigue of copper: Evolution, morphology and locations of surface slip markings10.1016/j.ijfatigue.2014.01.007 ↗
43. Cugy P, Galtier A. Microplasticity and temperature increase in low carbon steel. In: Proceedings of the 8th international fatigue conference, vol. 1, Stockholm, Sweden; 2002.
44. Life time and cyclic slip of copper in the vhcf regime10.1016/j.ijfatigue.2007.03.010 ↗
45. Half-cycle slip activity of persistent slip bands at different stages of fatigue life of polycrystalline nickel10.1016/j.msea.2008.03.027 ↗
46. Atomic force microscopy of surface relief in individual grains of fatigued 316l austenitic stainless steel10.1016/S1359-6454(02)00167-2 ↗
47. Afm and tem study of cyclic slip localization in fatigued ferritic x10cral24 stainless steel10.1016/j.actamat.2004.08.014 ↗
48. Fatigue extrusions, slip band cracking and a novel hybrid concept for fatigue crack closure close to the crack tip10.1016/j.ijfatigue.2011.03.017 ↗
49. Some comments about fatigue crack initiation in relation to cyclic slip irreversibility10.1016/j.engfracmech.2007.04.014 ↗
50. Damage in nickel base superalloy: influence of local parameters measured by electron backscattered diffraction and atomic force microscopy10.1016/j.scriptamat.2008.06.053 ↗
51. Microstructural evolution during fatigue of ultrafine grained aluminum alloy10.1016/j.msea.2010.08.047 ↗
52. Application of ebsd to the evaluation of plastic deformation in the mechanical testing of wc/co hardmetal
53. Cyclic deformation behavior of a medium carbon steel in the VHCF regime10.1016/j.proeng.2010.03.235 ↗
54. Mesoscopic simulations of dislocations and plasticity10.1016/S0921-5093(97)00146-9 ↗
55. Dislocation mobility and the mechanical response of b.c.c. single crystals : a mesoscopic approach