Fatigue crack growth simulation under cyclic non-proportional mixed mode loading
Source abstract
Abstract
Abstract An algorithm based on linear elastic fracture mechanics for three-dimensional fatigue crack growth simulation under non-proportional mixed-mode loading is proposed in the present paper. The crack growth behavior in thin-walled, hollow cylinders with a notch under combined non-proportional cyclic tension and torsion loadings are investigated with the finite element program ABAQUS and a 3D fracture analysis software FRANC3D. Different mixed-mode crack path prediction criteria are evaluated to estimate the crack growth direction. Fracture mode transition is observed, some influence factors are discussed. Crack growth cycles calculated based on the effective stress intensity factors satisfactorily match the experimental data for specimens tested under lower loading levels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Numerical methods in engineering · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. On the crack extension in plates under plane loading and transverse shear10.1115/1.3656897 ↗
2. Strain-energy-density factor applied to mixed mode crack problems10.1007/BF00035493 ↗
3. An energy release rate criterion for mixed mode fracture10.1007/BF00038891 ↗
4. Mixed mode fatigue crack growth at 550°C under plane stress conditions in Jethete M15210.1016/0013-7944(91)90072-9 ↗
5. Comparison of the criteria for mixed mode brittle fracture based on the preinstability stress-strain field, Part I: Slit and elliptical cracks under uniaxial tensile loading10.1007/BF00020696 ↗
6. Comparison of the criteria for mixed mode brittle fracture based on the preinstability stress-strain field, Part II: Pure shear and uniaxial compressive loading10.1007/BF00020264 ↗
7. The mixed mode I/II fracture behaviour of lightly tempered HY 130 steel at room temperature10.1016/0013-7944(92)90233-5 ↗
8. Highsmith · 2009
9. A review of fatigue crack growth in steels under mixed mode I and II loading10.1111/j.1460-2695.1992.tb00025.x ↗
10. Review of fatigue crack growth under non-proportional mixed-mode10.1016/j.ijfatigue.2013.04.001 ↗
11. Brüning · 2008
12. Fatigue crack growth behavior of fine-grained steel S460N under proportional and non-proportional loading10.1016/j.engfracmech.2010.02.008 ↗
13. Risswachstumsverhalten der Aluminiumlegierung AlMg4.5M unter proportionaler und nicht-proportionaler Schwingbelastung10.3139/120.110206 ↗
14. Vormwald · 1986
15. Simulation of the shear-tensile mode transition on dynamic crack propagations10.1007/s10704-012-9729-8 ↗
16. A crack opening stress equation for fatigue crack geowth10.1007/BF00020751 ↗
17. Variations of a global constraint factor in cracked bodies under tension and bending loads
18. Ermüdungslebensdauer von Baustahl unter komplexen Beanspruchungsabläufen am Beispiel des S46010.3139/120.110205 ↗
19. Measurements of strain fields around crack tips under proportional and non-proportional mixed-mode fatigue loading10.1016/j.ijfatigue.2016.01.018 ↗
20. Experimental study of crack growth under non-proportional loading along with first modeling attempts10.1016/j.ijfatigue.2016.03.036 ↗