Multiaxial fatigue resistance of shot peened high-strength aluminum alloys
Source abstract
Abstract
This paper is aimed at investigating multiaxial fatigue of shot peened Al-7075-T6 alloy. Plain axi- symmetric specimens were subjected to combined in-phase tension and torsion loading, under nominal load ratio R = 0.05 and biaxiality ratio k = sa/ra = 2. The results from multi-axial tests are discussed together with those obtained under pure tension and pure torsion loading. Fatigue crack initiation sites have been investigated through scanning electron microscopy fractography and the role of surface rough- ness on fatigue resistance has been analyzed. The initial and the stabilized residual stress profiles were used to discuss the improvement in the fatigue response in the hypothesis of crack initiation and early crack propagation as fatigue controlling parameters. For this purpose, several multiaxial fatigue criteria were used to account for the residual stress field. The Crossland and the Findley fatigue criteria incorpo- rating stabilized residual stresses as mean stresses were found to predict the fatigue strength with a relative error lower than 15% within the entire fatigue life interval, for all the material variants and the loading conditions considered.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Material Properties and Failure Mechanisms · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. 1987 · 69
2. Sanders · 1977
3. Application of bi-linear log–log S–N model to strain-controlled fatigue data of aluminum alloys and its effect on life predictions10.1016/j.ijfatigue.2005.03.003 ↗
4. Notch sensitivity of aluminium–lithium alloys in fatigue10.2472/jsms.43.840 ↗
5. Notch fatigue behaviour of shot peened high-strength aluminium alloys: experiments and predictions using a critical distance method10.1016/j.ijfatigue.2010.02.012 ↗
6. The fatigue resistance of peened 7050-T7451 aluminium alloy-repair and retreatment of a component surface10.1111/j.1460-2695.1994.tb00226.x ↗
7. Analysis of the effects of controlled shot peening on fatigue damage of high strength aluminium alloys10.1016/S0142-1123(02)00049-X ↗
8. Surface integrity of shot peened aluminium alloy 7075-T65110.5545/sv-jme.2010.142 ↗
9. Fatigue limits prediction of surface treated materials10.1016/j.jmatprotec.2005.10.010 ↗
10. Influence of shot peening on bending tooth fatigue limit of case hardened gears10.1016/S0142-1123(02)00034-8 ↗
11. Influence of shot peening parameters on the surface layer properties and the fatigue life of Ti–6Al–4V
12. Mechanical surface treatments on titanium, aluminum and magnesium alloy10.1016/S0921-5093(98)01168-X ↗
13. Optimisation of the fatigue resistance of 2024-T351 aluminium alloys by controlled shot peening—methodology results and analysis10.1016/j.ijfatigue.2004.01.003 ↗
14. Bending fatigue behaviour of differently shot peened Al 6082 T5 alloy10.1016/j.ijfatigue.2003.12.003 ↗
15. Fatigue life prediction of shot-peened steel10.1016/j.ijfatigue.2012.03.007 ↗
16. Crack propagation in the presence of shot-peening residual stresses10.1016/0013-7944(90)90048-L ↗
17. Relaxation of residual stresses at cold-worked fastener holes due to fatigue loading10.1111/j.1460-2695.1997.tb01501.x ↗
18. Numerical simulation of residual stress relaxation is shot peened high-strength aluminum alloys under reverse bending fatigue10.1115/1.3184083 ↗
19. Residual stress distributions and their influence on fatigue lifetimes10.1016/S0142-1123(01)00133-5 ↗
20. SAE fatigue design handbook. 3rd ed.; 1997, ISBN 978-1-56091-917-9.
21. A comparison of multiaxial fatigue criteria incorporating residual stress effects
22. Effect of large hydrostatic pressures on the torsional fatigue strength of an alloy steel
23. Behaviour of metals under complex static and alternating stresses
24. Sur la résistance à la fatigue des métaux
25. Fatigue behaviour of induction hardened notched components10.1016/S0142-1123(99)00019-5 ↗
26. High cycle fatigue behavior prediction of shot-peened parts10.1016/j.ijfatigue.2004.03.007 ↗
27. Reverse bending fatigue of shot peened 7075-T651 aluminium alloy: the role of residual stress relaxation10.1016/j.ijfatigue.2008.11.017 ↗
28. A theory for the effect of mean stress on fatigue of metals under combined torsion and axial load or bending10.1115/1.4008327 ↗
29. Simulation of multiaxial fatigue strength of steel component treated by surface induction hardening and comparison with experimental results10.1016/j.ijfatigue.2011.02.004 ↗
30. 3D modeling of subsurface fatigue crack nucleation potency of primary inclusions in heat treated and shot peened martensitic gear steels10.1016/j.ijfatigue.2008.12.001 ↗
31. A critical plane approach to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
32. A review of multiaxial fatigue of weldments: experimental results, design code and critical plane approaches10.1046/j.1460-2695.2001.00284.x ↗
33. Fatigue of 7075-T651 aluminum alloy10.1016/j.ijfatigue.2007.07.005 ↗
34. A stress–strain parameter for the fatigue of metals
35. Fatigue damage calculation using the critical plane approach10.1115/1.2804370 ↗
36. Noyan · 1987
37. Mathematical correction for stress in removed layers in X-ray diffraction residual stress analysis
38. An analysis of stress concentration caused by shot peening and its application in predicting fatigue strength10.1111/j.1460-2695.1992.tb01262.x ↗
39. A simplified and fast method to predict plain and notch fatigue of shot peened high-strength aluminium alloys under reverse bending10.1016/j.surfcoat.2011.12.008 ↗