Effects of aluminizing and combined strengthening on the fatigue property of K403 superalloy component under combined high and low cycle loading
Source abstract
Abstract
Abstract Fatigue properties of K403 superalloy blades were tested using a combined high cycle fatigue (HCF) and low cycle fatigue (LCF) loading. Samples were tested in the as-cast, as-aluminized, and as-strengthened conditions. The strengthening treatment was wet sand blasting the blade root, followed by shot peening, and vibratory polishing. Metallographic and scanning electron microscope (SEM) fractographic examinations were conducted on the blades, including detailed characterization of the layered structures formed by aluminizing using energy dispersive spectroscopy (EDS). It has found that aluminizing created a surface which was brittle at the test temperature. Fatigue cracks initiated in the aluminized coating and propagated into the substrate, which reduced the fatigue life of the blades. However, the strengthening treatment improved the fatigue life by creating a compressive residual stress and removing a portion of the brittle outer layer of the aluminized coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · High Temperature Alloys and Creep · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Experimental investigation of fatigue crack growth behavior of GH2036 under combined high and low cycle fatigue10.1016/j.ijfatigue.2015.10.027 ↗
2. Combined cycle fatigue of 7075 aluminum alloy – fracture surface characterization and short crack propagation10.1016/j.ijfatigue.2015.10.022 ↗
3. Mechanisms and modelling of fatigue crack growth under combined low and high cycle fatigue loading10.1016/j.ijfatigue.2010.08.008 ↗
4. Oxidation of nickel-based single-crystal superalloys for industrial gas turbine applications10.1016/j.actamat.2010.09.027 ↗
5. Improving the high-temperature oxidation resistance of a β–γ TiAl alloy by a CrAlC coating10.1016/j.corsci.2010.07.031 ↗
6. Effect of Cr on microstructural evolution of aluminized fourth generation Ni-base single crystal superalloys10.1016/j.surfcoat.2011.11.029 ↗
7. High-temperature oxidation and hot corrosion of CrAlC10.1016/j.actamat.2007.07.024 ↗
8. Initial stages of Na 2 SO 4 -induced degradation of β-Ni–36Al at 700 °C: I-intrinsic behavior
9. Modeling of microstructural evolution and lifetime prediction of MCrAlY coatings on nickel based superalloys during high temperature oxidation10.1016/j.surfcoat.2013.05.008 ↗
10. Microstructure and cyclic oxidation behaviour of low-Pt/Dy co-doped β-NiAl coatings on single crystal (SC) superalloy10.1016/j.surfcoat.2016.01.062 ↗
11. Influence of MCrAlY coating on low-cycle fatigue behavior of a directionally solidified nickel-based superalloy in hot corrosive environment10.1016/j.msea.2016.09.064 ↗
12. Influence of primary and secondary orientations on creep rupture behavior of aluminized single crystal Ni-based superalloy10.1016/j.msea.2014.02.079 ↗
13. The effect of shot peening on the microstructure and properties of a near-alpha titanium alloy following high temperature exposure10.1016/j.actamat.2012.06.017 ↗
14. The effects of laser peening and shot peening on high cycle fatigue in 7050–T7451 aluminum alloy10.1016/j.msea.2009.08.045 ↗
15. Laser shock processing effects on isothermal oxidation resistance of GH586 superalloy10.1016/j.apsusc.2015.01.033 ↗
16. Correlative characterization on microstructure evolution of Ni-based K403 alloy during thermal exposure10.1016/j.actamat.2017.04.006 ↗
17. Deformation and fracture behaviors of K403 Ni-based superalloy at elevated temperatures10.1016/j.jallcom.2016.12.325 ↗
18. Residual stress relaxation and its effects on the fatigue properties of Ti6Al4V alloy strengthened by warm laser peening
19. Stability of shot-peen residual stresses in an α + β titanium alloy10.1016/j.scriptamat.2009.03.038 ↗
20. Investigation on effect of laser shock processing on fatigue crack initiation and its growth in aluminum alloy plate10.1016/j.matdes.2014.09.001 ↗
21. A New Modified Contrast Method for Life Prediction in Combined Cycle Fatigue Test
22. 3-D analysis of fatigue crack behaviour in a shot peened steam turbine blade material10.1016/j.msea.2015.06.082 ↗
23. Effect of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defects10.1016/j.msea.2012.04.002 ↗
24. Microstructure stability and micro-mechanical behavior of as-cast gamma-TiAl alloy during high-temperature low cycle fatigue10.1016/j.actamat.2017.12.040 ↗
25. Effect of 950 °C thermal exposure on microstructures and properties of Ni-based K403 alloys10.1016/S1875-5372(13)60073-9 ↗
26. Microstructural evolution of the interface between NiCrAlY coating and superalloy during isothermal oxidation10.1016/j.matdes.2015.05.014 ↗
27. Diffusion barrier behaviors of (Ru, Ni)Al/NiAl coatings on Ni-based superalloy substrate10.1016/j.intermet.2010.08.016 ↗
28. Fabrication and oxidation behavior of Cr 2 AlC coating on Ti6242 alloy10.1016/j.surfcoat.2010.01.002 ↗
29. Microstructures and mechanical properties of β-NiAlHf coated single crystal superalloy10.1016/j.msea.2016.07.067 ↗
30. Creep behavior of Pt-aluminide (PtAl) coated directionally solidified Ni-based superalloy CM-247LC after thermal exposure10.1016/j.msea.2015.06.011 ↗
31. Hot corrosion and low cycle fatigue of a Cr 2 AlC-coated superalloy
32. Long-term oxidation of MCrAlY coatings at 1000 °C and an Al-activity based coating life criterion10.1016/j.surfcoat.2017.09.086 ↗
33. Cyclic oxidation and interdiffusion behavior of Pt modified NiAlHfCrSi coatings on single crystal superalloy containing Mo10.1016/j.surfcoat.2014.10.055 ↗
34. On the influence of mechanical surface treatments—deep rolling and laser shock peening—on the fatigue behavior of Ti–6Al–4V at ambient and elevated temperatures10.1016/S0921-5093(03)00069-8 ↗
35. Effect of laser shock peening on the high-temperature fatigue performance of 7075 aluminum alloy10.1016/j.msea.2017.08.050 ↗
36. Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts10.1016/j.actamat.2010.03.026 ↗
37. Effect of repeated impacts on mechanical properties and fatigue fracture morphologies of 6061–T6 aluminum subject to laser peening10.1016/j.msea.2012.01.125 ↗
38. Effect of shot peening on fatigue performance of a lamellar titanium aluminide alloy10.1016/j.actamat.2005.10.043 ↗
39. Short-term oxidation resistance and degradation of CrAlC coating on M38G superalloy at 900–1100 °C10.1016/j.corsci.2011.07.032 ↗
40. Factors affecting the microstructure of platinum-modified aluminide coatings during a vapor phase aluminizing process10.1016/j.surfcoat.2008.10.031 ↗
41. Effect of laser shock peening on residual stress, microstructure and fatigue behavior of ATI 718plus alloy10.1016/j.ijfatigue.2017.04.016 ↗
42. Effects of laser shock peening on the micro-hardness, tensile properties, and fracture morphologies of CP-Ti alloy at different temperatures
43. Micro-structural strengthening mechanism of multiple laser shock processing impacts on AISI 8620 steel10.1016/j.msea.2011.04.018 ↗
44. A comprehensive investigation on the effects of laser and shot peening on fatigue crack growth in friction stir welded AA 2195 joints10.1016/j.ijfatigue.2008.03.029 ↗