Influence of temperature on the high-cycle fatigue properties of compacted graphite iron
Source abstract
Abstract
Abstract High-cycle fatigue tests of compacted graphite iron (CGI) at 25 °C, 400 °C and 500 °C were performed. The corresponding fatigue damage mechanisms were investigated by the observations on fractographies and longitudinal section morphologies of typical samples. The results show that the decreasing rate of fatigue strength from 400 °C to 500 °C is higher than that from 25 °C to 400 °C. The fatigue strength coefficient of S-N curve fitted with the Basquin relationship decreases from 25 °C to 400 °C and increases from 400 °C to 500 °C; while the fatigue strength exponent performs in an inverse tendency. These are resulted from plastic deformation mode transition of the ferrite at the tip of the crack induced by the graphite debonding: slip band at 25 °C and 400 °C to grain boundary sliding at 500 °C. Finally, the influences of carbide on fatigue properties were discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Powder Metallurgy Techniques and Materials · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Failure analysis of a diesel engine cylinder head based on finite element method10.1016/j.engfailanal.2013.07.023 ↗
2. Guesser W, Schroeder T, Dawson S, Production experience with compacted graphite iron automotive components, Proceedings of the AFS Congress, Dallas; 2001.
3. Effect of temperature on the tensile properties of an as-cast aluminum alloy A31910.1016/j.msea.2006.11.029 ↗
4. Influence of test temperature on the tensile properties along the thickness in a friction stir welded aluminum alloy10.1016/j.jmst.2015.07.005 ↗
5. Compression mechanical behaviour of 7075 aluminium matrix composite reinforced with nano-sized SiC particles in semisolid state10.1016/j.jmst.2016.01.015 ↗
6. The role of graphite morphology and matrix structure on low frequency thermal cycling of cast irons
7. Thermal fatigue of cast iron brake disk materials10.1007/s12206-012-0435-2 ↗
8. The thermal fatigue resistance of vermicular cast iron coupling with H13 steel units by cast-in process10.1016/j.matdes.2010.01.041 ↗
9. Effects of holding time on thermomechanical fatigue properties of compacted graphite iron through tests with notched specimens10.1007/s11661-012-1320-4 ↗
10. Influence of molybdenum alloying on thermomechanical fatigue life of compacted graphite irons10.1179/1743133612Y.0000000021 ↗
11. Thermo-mechanical fatigue resistance characterization and materials ranking from heat-flux-controlled tests. Application to cast-irons for automotive exhaust part10.1016/j.ijfatigue.2013.06.012 ↗
12. Improving the high-cycle fatigue lives of Fe-30Mn-0.9 C twinning-induced plasticity steel through pre-straining10.1007/s11661-015-3010-5 ↗
13. High cycle fatigue behavior of a single crystal superalloy at elevated temperatures10.1016/j.msea.2006.11.045 ↗
14. Fatigue strength of spheroidal graphite cast iron at elevated temperatures under axial load10.1016/0142-1123(90)90096-W ↗
15. A simulation-based investigation of the staircase method for fatigue strength testing10.1016/j.mechmat.2005.12.005 ↗
16. Optical in situ investigations of overload effects during fatigue crack growth in nodular cast iron10.1016/j.engfracmech.2012.01.006 ↗
17. Graphite nodules and fatigue crack propagation micromechanisms in a ferritic ductile cast iron10.1111/ffe.12056 ↗
18. Investigation on the thermal crack evolution and oxidation effect of compacted graphite iron under thermal shock10.1007/s11665-015-1641-8 ↗
19. Fatigue crack propagation damaging micromechanisms in ductile cast irons10.1016/j.engfracmech.2007.02.002 ↗
20. Rui SS, Shang YB, Qiu Wh, Niu LS, Shi HJ, Matsumoto S, et al., Fracture mode identification of low alloy steels and cast irons by electron back-scattered diffraction misorientation analysis. J Mater Sci Technol.
21. Sjögren T. Influences of the graphite phase on elastic and plastic deformation behaviour of cast irons, Doctor Dissertation of Jönköping university, Jönköping university, Jönköping, Sweden; 2007.
22. Damaging micromechanisms characterization of a ferritic ductile cast iron10.1016/j.engfracmech.2010.03.037 ↗
23. Influence of thermal exposure on microstructure evolution and tensile fracture behaviors of compacted graphite iron10.1016/j.msea.2016.03.118 ↗
24. Transition of tensile strength and damaging mechanisms of compacted graphite iron with temperature10.1016/j.msea.2016.09.035 ↗
25. Three-dimensional EBSD characterization of thermo-mechanical fatigue crack morphology in compacted graphite iron10.1016/j.matchar.2014.01.015 ↗
26. Volume expansion of compacted graphite iron induced by pearlite decomposition and the effect of oxidation at elevated temperature10.1007/s11085-013-9406-y ↗
27. Microstructural dependence of tensile and fatigue properties of compacted graphite iron in diesel engine components
28. Evaluation of the staircase and the accelerated test methods for fatigue limit distributions10.1016/S0142-1123(00)00039-6 ↗
29. Tensile and thermal properties in compacted graphite irons at elevated temperatures10.1007/s11661-010-0385-1 ↗
30. Elevated temperature low cycle fatigue of grey cast iron used for automotive brake discs10.1016/j.engfailanal.2014.03.021 ↗
31. Verification of the simulated residual stress in the cross section of gray cast iron stress lattice shape casting via thermal stress analysis10.1007/s11661-013-2126-8 ↗
32. High temperature tensile and abrasive wear characteristics of As-cast ductile irons10.2355/isijinternational.43.1274 ↗
33. High-temperature mechanical and fatigue properties of cast alloys intended for use in exhaust manifolds10.1016/j.msea.2014.08.014 ↗
34. Temperature-dependence of tensile-strength and hardness for nodular cast-iron and their mutual correlation10.1007/BF00541560 ↗
35. Prediction of failure of cast iron with dynamic loading and high temperature10.1016/j.msea.2012.12.085 ↗
36. A study of tensile properties of ferritic compacted graphite cast irons at intermediate temperatures10.1007/BF01174533 ↗
37. Ghodrat · 2013
38. General relation between tensile strength and fatigue strength of metallic materials10.1016/j.msea.2012.11.103 ↗
39. Tensile and fatigue properties of ultrafine-grained low-carbon steel processed by equal channel angular pressing10.1016/j.msea.2012.06.005 ↗
40. Relations between fatigue strength and other mechanical properties of metallic materials10.1111/ffe.12158 ↗