Energy based analysis of crack tip plastic zone of AA2024-T3 under cyclic loading
Source abstract
Abstract
Abstract The plastic zone at a crack tip of the commercially available aluminum alloy AA2024-T3 was energetically analyzed by digital image correlation and coupled FEM simulations. In mode I, mode II and mixed mode experiments the crack tip was cyclically loaded by the same maximum equivalent stress intensity factor. In every load maximum and minimum a digital image of the crack tip area was taken to compute the displacement field using digital image correlation (DIC). The computed displacement field was mapped on the nodes of a 2d FE-model. Using a bilinear isotropic hardening model the stresses and the plastic strain energy as a measurement for the damage accumulation in the plastic zone was computed. Beyond that a postprocessor for the DIC based strain fields has been programmed to calculate the actual stress intensity factors during cyclic loading.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Non-Destructive Testing Techniques · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Fatigue damage in aircraft structures, not wanted, but tolerated?10.1016/j.ijfatigue.2008.05.016 ↗
2. Advanced analysis of crack tip plastic zone under cyclic loading10.1016/j.ijfatigue.2016.08.013 ↗
3. Prediction of crack growth direction under plane stress for mixed-mode I and II loading10.1046/j.1460-2695.2000.00300.x ↗
4. The fracture process in elastic-plastic materials under biaxial cyclic loading10.1016/S0142-1123(02)00091-9 ↗
5. Cyclic plastic deformation response at fatigue crack tips10.1016/j.ijpvp.2012.10.007 ↗
6. Numerical evaluation of Paris-regime crack growth rate based on plastically dissipated energy10.1016/j.engfracmech.2014.04.013 ↗
7. An energy based fatigue crack growth model10.1016/S0142-1123(03)00049-5 ↗
8. GOM GmbH; 2016 [Online]. Available: .
9. A loading device for the creation of mixed-mode in fracture mechanics10.1007/BF00942726 ↗
10. 2D- and 3D-mixed mode fracture criteria
11. Kuna · 2013
12. A white light speckle method applied to the detemination of stress intensity factor and displacement field around a crack tip10.1016/0013-7944(81)90110-7 ↗
13. Estimation of stress intensity factor by digital image correlation10.1016/0013-7944(87)90124-X ↗
14. The stress intensity of mixed mode cracks determined by digital image correlation10.1243/03093247JSA419 ↗
15. Utilizing digital image correlation to determine stress intensity factors10.1016/j.polymertesting.2014.04.005 ↗
16. Optimal and noise-robust extraction of fracture mechanics parameters from kinematic measurements10.1016/j.engfracmech.2011.01.012 ↗
17. Digital image correlation and fracture: an advanced technique for estimating stress intensity factors of 2D and 3D cracks
18. An approach to calculate the J-integral by digital image correlation displacement field measurement10.1111/j.1460-2695.2012.01685.x ↗
19. A contour integral computation of mixed-mode stress intensity factors10.1007/BF00032831 ↗
20. A mixed-mode crack analysis of isotropic solids using conservation laws of elasticity10.1115/1.3153665 ↗
21. On the stress distribution at the base of a stationary crack10.1115/1.4011454 ↗
22. Davis · 1984
23. Department of Defense. MIL-HDBK-5J – metallic materials and elements for aerospace vehicle structures; 2003.
24. Tamarin · 2002