A new approach of fatigue life prediction for metallic materials under multiaxial loading
Source abstract
Abstract
Abstract Based on experimental data found in literatures, four traditionally multiaxial fatigue life criteria are analyzed and verified. It is discovered that these conventional criteria cannot reflect well the combined effect both under tension and torsion loadings for some materials, such as 6082-T6 and AlCu4Mg1, due to lack of enough consideration about the influence of stress amplitude ratio and stress level on fatigue life even under proportional loading. In order to solve this problem, a new approach of fatigue life prediction, based on the equal-life curve, is proposed and it is composed of three parts: the multiaxial fatigue life surface, a new path-dependent factor for multiaxial high-cycle fatigue and a material parameter describing material sensitivity to non-proportional loading. Finally, the precision of the presented approach is systematically checked against the experimental data found in literatures for four different materials under proportional and non-proportional loadings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Probabilistic and Robust Engineering Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Multiaxial fatigue: an overview and same approximation models for life estimation10.1016/j.ijfatigue.2011.01.003 ↗
2. Damage analysis of low cycle fatigue under non-proportional loading10.1016/0142-1123(94)90007-8 ↗
3. Effect of large hydrostatic pressures on the torsional fatigue strength of an alloy steel
4. Sines · 1959
5. An explanation on fatigue limit under combined stress10.1299/jsme1958.20.257 ↗
6. A comparative study of multiaxial high-cycle fatigue criteria for metals10.1016/S0142-1123(96)00064-3 ↗
7. Long life fatigue under multiaxial loading10.1016/S0142-1123(01)00059-7 ↗
8. Properties of some materials for cast crankshafts, with special reference to combined alternating stresses10.1243/PIAE_PROC_1936_031_040_02 ↗
9. The strength of metals under combined alternating stress10.1243/PIME_PROC_1935_131_008_02 ↗
10. Analytical and experimental studies on fatigue crack path under complex multi-axial loading10.1111/j.1460-2695.2006.01001.x ↗
11. Comparative study on biaxial low-cycle fatigue behaviour of three structural steels10.1111/j.1460-2695.2006.01061.x ↗
12. New approach for analysis of complex multiaxial loading paths10.1016/j.ijfatigue.2013.05.004 ↗
13. Evaluation of uniaxial fatigue criteria applied to multiaxially loaded unnotched samples
14. Susmel · 2009
15. Susmel L, Petrone N. Multiaxial fatigue life estimations for 6082-T6 cylindrical specimens under in-phase and out-of-phase biaxial loadings. In: Carpinteri A, deFreitas M, Spagnoli A, editors. 6th Int Conf on Biaxial/Multiaxial Fatigue and Fracture, Lisbon, Portugal. ESIS Publication; 2001. p. 83–104.10.1016/S1566-1369(03)80006-7 ↗
16. A new path-dependent multiaxial fatigue model for metals under different paths10.1111/ffe.12106 ↗
17. Itoh T, Nakata T, Sakane M, Ohnami M. Nonproportional low cycle fatigue of 6061 aluminum alloy under 14 strain paths. In: Macha E, Mroz Z, editors. Proceedings of fifth international conference biaxial/multiaxial fatigue and fracture, TU Opole, Cracow, 8–12 September, vol. I, 1997. p. 173–87.
18. Crack initiation and growth path under multiaxial fatigue loading in structural steels10.1016/j.ijfatigue.2009.01.013 ↗
19. A new model for describing a stable cyclic stress–strain relationship under non-proportional loading based on activation state of slip systems10.1111/j.1460-2695.2004.00818.x ↗
20. Dislocation structure and non-proportional hardening of type 304 stainless steel10.1111/j.1460-2695.1997.tb01496.x ↗
21. Zhang · 2010
22. A critical plane to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗