Defect tolerance and hydrogen susceptibility of the fatigue limit of an additively manufactured Ni-based superalloy 718
Source abstract
Abstract
Abstract The sensitivity of the fatigue limit of an additively manufactured, Ni-based superalloy 718 sample to surface finishing conditions and solute hydrogen was investigated via a series of tension–compression fatigue tests. The results revealed that neither defects nor hydrogen diminished the fatigue limit of the sample. The high defect tolerance of this material is attributed to a large unit of crack initiation in the coarse grain, which eclipses the detrimental effect of AM-process-induced defects. Also, from the results, it is inferred that hydrogen has little effect on the crack propagation rate and the crack growth threshold of the material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Special Metals Corporation. INCONEL ® alloy 718. 2007.
2. On some advanced nickel-based superalloys for disk applications
3. Paulonis DF, Schirra JJ. Alloy 718 at Pratt & Whitney - Historical Perspective and Future Challenges. Superalloys 718, 625, 706 Var Deriv 2001:13–23.10.7449/2001/Superalloys_2001_13_23 ↗
4. Machinability of nickel based superalloys: a review10.1016/j.matpr.2017.02.266 ↗
5. The machinability of nickel-based alloys: A review10.1016/S0924-0136(98)00314-8 ↗
6. Rocket engine made by additive manufacturing
7. Development status of H3 launch vehicle-to compete and survive in the global commercial market-
8. Development of turbopump for LE-9 engine
9. The metallurgy and processing science of metal additive manufacturing10.1080/09506608.2015.1116649 ↗
10. Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing10.1016/j.matdes.2016.01.099 ↗
11. Quantitative evaluation of fatigue strength of metals containing various small defects or cracks10.1016/0013-7944(83)90018-8 ↗
12. Effect of hardness and crack geometries on ΔKth of small cracks emanating from small defects
13. Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting10.1016/j.ijfatigue.2018.08.002 ↗
14. Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing10.1016/j.ijfatigue.2018.07.020 ↗
15. A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes10.1016/j.ijfatigue.2016.06.020 ↗
16. Effect of defects on the fatigue limit of Ni-based superalloy 718 with different grain sizes10.1111/ffe.12989 ↗
17. Morphology of γ′ and γ″ precipitates and thermal stability of inconel 718 type alloys10.1007/BF02649604 ↗
18. Phase transformations and grain growth behaviors in superalloy 71810.1016/j.jallcom.2017.11.327 ↗
19. Microstructural evolution and grain refinement mechanisms of a Ni-based superalloy during a two-stage annealing treatment10.1016/j.matchar.2019.03.037 ↗
20. Microstructure, fatigue, and impact toughness properties of additively manufactured nickel alloy 718
21. Effect of microstructure on high-cycle fatigue properties of Alloy 718 plates. IOP Conf Ser
22. Varied heat treatments and properties of laser powder bed printed Inconel 71810.1016/j.msea.2019.03.103 ↗
23. Heat treatment of Inconel 718 produced by selective laser melting: Microstructure and mechanical properties10.1016/j.msea.2019.02.046 ↗
24. Delta phase precipitation in inconel 71810.1016/j.matchar.2004.07.004 ↗
25. Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting10.1016/j.matdes.2017.05.065 ↗
26. Safety standard for hydrogen and hydrogen systems: guidelines for hydrogen system design
27. Fatigue crack growth properties of Ni-base alloys in high pressure hydrogen at room temperature10.2472/jsms.38.539 ↗
28. Effects of precipitation phases on the hydrogen embrittlement sensitivity of inconel 71810.1016/S1468-6996(02)00039-6 ↗
29. Hydrogen embrittlement behavior of Inconel 718 alloy at room temperature10.1016/j.jmst.2018.10.002 ↗
30. Hydrogen assisted crack initiation and propagation in a nickel-based superalloy10.1016/j.actamat.2016.05.003 ↗
31. Hydrogen-assisted failure in Ni-based superalloy 718 studied under in situ hydrogen charging: The role of localized deformation in crack propagation10.1016/j.actamat.2017.02.059 ↗
32. Pronounced transition of crack initiation and propagation modes in the hydrogen-related failure of a Ni-based superalloy 718 under internal and external hydrogen conditions
33. Ogawa Y, Takakuwa O, Okazaki S, Okita K, Funakoshi Y, Matsunaga H. Hydrogen-assisted fatigue crack propagation in a Ni-based superalloy 718 revealed via crack path crystallography and deformation microstructures. Corros Sci; under review.
34. Hydrogen-enhanced localized plasticity-a mechanism for hydrogen-related fracture10.1016/0921-5093(94)90975-X ↗
35. The predominant role of strain-induced vacancies in hydrogen embrittlement of steels: Overview10.1016/j.actamat.2018.12.013 ↗
36. A mechanistic theory of hydrogen embrittlement of steels10.1002/bbpc.19720760864 ↗
37. Hydrogen permeation behavior in IN718 and GH761 superalloys10.1007/BF02651595 ↗
38. Effect of defects and hydrogen on the fatigue limit of Ni-based superalloy 718
39. Murakami · 2002
40. Precipitation of the δ-Ni3Nb phase in two nickel base superalloys10.1007/BF02649259 ↗
41. On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading10.1016/j.msea.2016.05.089 ↗
42. Unexpected δ-phase formation in additive-manufactured Ni-based superalloy10.1007/s11837-015-1772-2 ↗
43. Mechanical and microstructural investigation of nickel-based superalloy IN718 manufactured by selective laser melting (SLM)10.1002/adem.201500158 ↗
44. Low cycle fatigue behavior of inconel 718 at 298 K and 823 K10.1007/BF02667395 ↗
45. Shearing of γ″ precipitates and formation of planar slip bands in Inconel 718 during cyclic deformation10.1016/j.scriptamat.2004.11.023 ↗
46. Cyclic deformation mechanisms of precipitation-hardened Inconel 718 superalloy10.1016/j.msea.2006.10.181 ↗
47. Altstetter CJ. Inhomogeneous deformation in INCONEL 718 during monotonic and cyclic loadings10.1007/BF02647316 ↗
48. Fatigue limit evaluation considering crack initiation for lamellar pearlitic steel10.1016/j.proeng.2011.04.245 ↗
49. Microstructural extremes and the transition from fatigue crack initiation to small crack growth in a polycrystalline nickel-base superalloy10.1016/j.actamat.2012.01.049 ↗
50. Effect of small defect orientation on fatigue limit of carbon steels10.1111/ffe.12321 ↗
51. Effect of post-treatments under hot isostatic pressure on microstructural characteristics of EBM-built Alloy 718
52. Effect of heat treatment variations on the mechanical properties of Inconel 718 selective laser melted specimens
53. Frequency and wave-form effects on the fatigue crack growth behavior of alloy 718 at 298 K and 823 K10.1007/BF02646402 ↗
54. Fatigue behaviour of two nickel-base alloys I: Experimental results on low cycle fatigue, fatigue crack propagation and substructures10.1016/0025-5416(82)90129-X ↗
55. Hydrogen effects on the interaction between dislocations10.1016/S1359-6454(97)00349-2 ↗
56. Direct observations of enhanced dislocation mobility due to hydrogen10.1016/0036-9748(81)90249-0 ↗
57. Function of hydrogen in embrittlement of high-strength steels10.2355/isijinternational.41.590 ↗
58. Lattice defects dominating hydrogen-related failure of metals10.1016/j.actamat.2008.06.031 ↗