Investigation of the sensitivity of the fatigue resistance to defect position in aluminium alloys obtained by Selective laser melting using artificial defects
Source abstract
Abstract
Abstract This study focuses on the influence of defects on the fatigue behavior of AlSi7Mg0.6 alloy produced by Selective laser melting. Artificial defects were generated in fatigue specimens by introducing holes in the CAD files prior manufacturing. The introduction of such defects, whose sizes and positions are controlled, aims to provide a proper assessment of defect sensitivity, in particular regarding the influence of defect position. Fatigue tests were performed, and finite-element calculations accounting for real defect geometries were conducted. The criticalities of the simulated defects were then evaluated using a non-local Crossland criterion, and discussed with regard to the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: processing, microstructure, and properties10.1016/j.pmatsci.2015.03.002 ↗
2. Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy10.1016/j.ijfatigue.2016.06.003 ↗
3. Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting10.1016/j.msea.2017.11.078 ↗
4. Fatigue properties of AlSi10mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength10.1016/j.engfracmech.2017.11.002 ↗
5. Murakami · 2002
6. Applicability of fracture mechanics to very small cracks, ASM
7. Prediction of non propagating cracks10.1016/0013-7944(79)90081-X ↗
8. Etude de l'influence des hétérogénéités microstructurales sur la tenue en fatigue à grand nombre de cycles des alliages d'aluminium de fonderie
9. The short crack problem, fatigue & fracture of engineering10.1111/j.1460-2695.1982.tb01250.x ↗
10. The theory of critical distances: a review of its applications in fatigue10.1016/j.engfracmech.2006.12.004 ↗
11. Geometrical effects in fatigue: a unifying theoretical model10.1016/S0142-1123(99)00007-9 ↗
12. Prediction of fatigue failure location on a component using a critical distance method10.1016/S0142-1123(00)00062-1 ↗
13. Non-local high cycle fatigue strength criterion for metallic materials with corrosion defects10.1111/ffe.12329 ↗
14. Multiaxial fatigue limit criterion for defective materials10.1016/j.engfracmech.2005.06.005 ↗
15. Numerical modelling of surface roughness effect on the fatigue behavior of Ti-6al-4v obtained by additive manufacturing10.1016/j.ijfatigue.2019.02.014 ↗
16. Computed tomography for characterization of fatigue performance of selective laser melted parts10.1016/j.matdes.2015.06.063 ↗
17. Multiaxial fatigue behavior of wrought and additive manufactured Ti-6al-4v including surface finish effect10.1016/j.ijfatigue.2017.03.044 ↗
18. A finite element modelling study of strain localization in the vicinity of near-surface cavities as a cause of subsurface fatigue crack initiation10.1023/A:1016350528652 ↗
19. The effect of porosity on the fatigue life of cast aluminium-silicon alloys10.1111/j.1460-2695.2004.00780.x ↗
20. Influence of casting defects on the fatigue behaviour of an A357–T6 aerospace alloy, Ph.D. thesis
21. Influence of surface and internal casting defects on the fatigue behaviour of A357–T6 cast aluminium alloy10.1016/j.ijfatigue.2015.07.032 ↗
22. Environmentally-assisted fatigue crack growth mechanisms in advanced materials for aerospace applications10.1016/j.ijfatigue.2007.03.014 ↗
23. Qualification of AM parts: extreme value statistics applied to tomographic measurements10.1016/j.matdes.2017.05.091 ↗
24. Quantitative evaluation of fatigue strength of metals containing various small defects or cracks10.1016/0013-7944(83)90018-8 ↗
25. Experimental study of porosity and its relation to fatigue mechanisms of model Al-Si7-Mg0.3 cast Al alloys10.1016/S0921-5093(01)01225-4 ↗
26. Armstrong · 1966
27. Effect of large hydrostatic pressures on the torsional fatigue strength of fan alloy steel
28. Quality control of AlSi10mg produced by SLM: Metallography versus CT scans for critical defect size assessment
29. Influence of casting defects on the fatigue behavior of cast aluminum AS7g06-T610.1016/j.ijfatigue.2014.01.011 ↗
30. Multiaxial fatigue design of cast parts: Influence of complex defect on cast AS7g06-T610.1016/j.engfracmech.2014.08.007 ↗