Estimation of fatigue life under multiaxial loading by varying the critical plane orientation
Source abstract
Abstract
Abstract Fatigue life of different metallic materials under multiaxial loading is evaluated by employing the critical plane-based criterion proposed by some of the present authors. According to such a criterion, the multiaxial fatigue strength is assessed through an equivalent stress expressed by a linear combination of the normal stress amplitude and the shear stress amplitude acting on the critical plane. The critical plane orientation is determined by a novel expression, which is a non-linear function of the ratio between the fully reversed stress fatigue limits (τaf,−1/σaf,−1), and such an expression can be employed for any value of this ratio. Some experimental fatigue life data related to smooth specimens under combined normal loading (tension or bending) and torsion loading are compared with the theoretical estimations deduced through the above criterion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Structural Load-Bearing Analysis · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Influence of stress and environment on the fatigue strength and failure characteristics of case carburised low alloy steels for aerospace applications10.1016/j.ijfatigue.2012.04.012 ↗
2. A convenient way to represent fatigue crack growth in structural adhesives10.1111/ffe.12241 ↗
3. Fatigue in laser welded titanium tubes intended for use in aircraft pneumatic systems10.1016/j.ijfatigue.2016.04.018 ↗
4. Thermal fatigue analysis of automotive Diesel piston: experimental procedure and numerical protocol10.1016/j.ijfatigue.2014.11.011 ↗
5. Thermo-mechanical fatigue influence of copper and silicon on hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys used in cylinder heads10.1016/j.ijfatigue.2016.02.017 ↗
6. High- and low-cycle fatigue influence of silicon, copper, strontium and iron on hypo-eutectic Al–Si–Cu and Al–Si–Mg cast alloys used in cylinder heads10.1016/j.ijfatigue.2015.09.015 ↗
7. Determination of fretting parameters of hoisting rope in coalmine and fretting-fatigue behavior of steel wires10.1108/ILT-03-2011-0021 ↗
8. Experimental study on fatigue failure and damage of sandwich structure with PMI foam core10.1111/ffe.12246 ↗
9. Fatigue limit of induction hardened railway axles10.1111/ffe.12337 ↗
10. Fatigue and fracture behavior of pearlitic Grade 900A steel used in railway applications10.1016/j.tafmec.2015.12.017 ↗
11. Effect of hardness on multiaxial fatigue behaviour and some simple approximations for steels10.1111/j.1460-2695.2009.01369.x ↗
12. Criteria of multiaxial random fatigue based on stress, strain and energy parameters of damage in the critical plane10.1002/mawe.200500898 ↗
13. Effect of large hydroscopic pressures on the torsional fatigue strength of an alloy steel
14. A comparative study of multiaxial high-cycle fatigue criteria for metals10.1016/S0142-1123(96)00064-3 ↗
15. A stress invariant based criterion to estimate fatigue damage under multiaxial loading10.1016/j.ijfatigue.2007.11.006 ↗
16. Recent developments on multiaxial fatigue: the contribution of the University of Brasília10.1016/j.tafmec.2014.06.007 ↗
17. A critical plane approach to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
18. Multiaxial fatigue life predictions under the influence of mean stresses10.1115/1.3226066 ↗
19. A path-independent parameter for fatigue under proportional and non-proportional loading10.1111/j.1460-2695.1993.tb00739.x ↗
20. A simple and efficient reformulation of the classical Manson-Coffin curve to predict lifetime under multiaxial fatigue loading - Part I: plain materials
21. A review of critical plane orientations in multiaxial fatigue failure criteria of metallic materials10.1007/s10704-005-1088-2 ↗
22. Low-cycle fatigue life prediction of various metallic materials under multiaxial loading10.1111/j.1460-2695.2010.01517.x ↗
23. The multiaxial random fatigue criteria based on strain and energy damage parameters on the critical plane for low-cycle range10.1016/j.ijfatigue.2011.09.013 ↗
24. Estimation of fatigue life of materials with out-of-parallel fatigue characteristics under block loading10.4028/www.scientific.net/MSF.726.181 ↗
25. Fatigue life estimation under cyclic loading including out-of-parallelism of the characteristics10.4028/www.scientific.net/AMM.104.125 ↗
26. Fatigue life of metallic material estimated according to selected models and load conditions
27. Lifetime of semi ductile materials through the critical plane approach10.1016/j.ijfatigue.2013.11.019 ↗
28. A multiaxial criterion for notch high-cycle fatigue using a critical-point method10.1016/j.engfracmech.2006.11.002 ↗
29. On the use of the Prismatic Hull method in a critical plane-based multiaxial fatigue criterion10.1016/j.ijfatigue.2014.05.007 ↗
30. A strain-based multiaxial fatigue criterion connected to the critical plane approach10.1016/j.proeng.2014.06.270 ↗
31. Lifetime estimation in the low/medium-cycle regime using the Carpinteri-Spagnoli multiaxial fatigue criterion10.1016/j.tafmec.2014.06.002 ↗
32. Critical plane orientation influence on multiaxial high-cycle fatigue assessment10.1134/S1029959915040074 ↗
33. Critical plane criterion for fatigue life calculation: time and frequency domain formulations10.1016/j.proeng.2015.02.062 ↗
34. Fatigue life estimation for multiaxial low-cycle fatigue regime: the influence of the effective Poisson ratio value10.1016/j.tafmec.2015.06.013 ↗
35. Comparison of HCF life prediction methods based on different critical planes under multiaxial variable amplitude loading10.1111/ffe.12234 ↗
36. A new criterion of fatigue strength for out-of-phase bending and torsion of hard metals10.1016/0142-1123(94)90449-9 ↗
37. A high-cycle fatigue criterion applied in biaxial and triaxial out-of-phase stress conditions10.1111/j.1460-2695.1995.tb00143.x ↗
38. Fatigue behavior of cyclically softening and hardening steels under multiaxial elastic-plastic deformation
39. Dauerschwingfestigkeit bei nich synchroner mehrachsiger Beanspruchung10.1002/mawe.19850160310 ↗
40. Multiaxial fatigue behaviour of cyclic hardening and softening steels under variable elastic plastic strain amplitude
41. Berechnung der Dauerschwingfestigkeit bei mehrachsiger Beanspruchung – Teil I10.1002/mawe.19930240706 ↗
42. Berechnung der Dauerschwingfestigkeit bei mehrachsiger Beanspruchung – Teil II10.1002/mawe.19930240808 ↗
43. Local strain energy density to assess the multiaxial fatigue strength of titanium alloys10.3221/IGF-ESIS.37.10 ↗
44. Cyclic plasticity in three-dimensional notched components under in-phase multiaxial loading at R=−110.1016/j.tafmec.2015.10.004 ↗
45. Fatigue assessment of notched specimens by means of a critical plane-based criterion and energy concepts10.1016/j.tafmec.2016.03.003 ↗
46. Brittle fracture of rounded V-notches in isostatic graphite under static multiaxial loading10.1134/S1029959915040025 ↗
47. Some recent results on the fatigue strength of notched specimens made of 40CrMoV13.9 steel at room and high temperature10.1134/S1029959915020034 ↗
48. Multiaxial fatigue strength of severely notched titanium grade 5 alloy10.3221/IGF-ESIS.33.29 ↗
49. Fatigue strength of severely notched specimens made of Ti-6Al-4V under multiaxial loading10.1111/ffe.12272 ↗
50. Nishihara · 1941
51. Lee SB. A criterion for fully reversed out of phase torsion and bending. In: Miller KJ, Brown MW, editors. Multiaxial fatigue, ASTM STP 853, Philadelphia, USA; 1985. p. 553–68.10.1520/STP36242S ↗
52. Fracture modes and low cycle biaxial fatigue life at elevated temperature
53. Sanetra · 1991
54. Muller · 1994
55. Pawliczek · 2001
56. Badania zmęczeniowe mosiądzu MO58 w warunkach proporcjonalnego cyklicznego zginania ze skręcaniem
57. Multiaxial fatigue behaviour of AA6068 and AA2017A aluminium alloys under in-phase bending with torsion loading condition10.1002/mawe.201400214 ↗
58. Generalization of fatigue fracture criteria for multiaxial sinusoidal loadings in the range of random loadings
59. ASTM E 739-91, Standard practice for statistical analysis of linearized stress–life (S–N) and strain life fatigue data. In: Annual Book of ASTM Standards, vol. 03.01, Philadelphia; 1999. p. 614–28.