Very high cycle fatigue of copper: Evolution, morphology and locations of surface slip markings
Source abstract
Abstract
The surfaces of commercially pure polycrystalline copper specimens subjected to interrupted 20 kHz fatigue tests in the very high cycle fatigue regime were investigated. The stress amplitude needed to form the early slip markings was found twice lower than the stress amplitude required to fracture which confirmed the results obtained by Stanzl-Tschegg et al. (2007). Three types of slip markings were classified according to their morphology and their location in the polycrystalline material. They are compared to slip markings observed during fatigue tests at frequencies lower than 100 Hz and numbers of cycles lower than 107. For 20 kHz fatigue tests, stress amplitudes ranging from 45 MPa to 65 MPa produce straight and long early persistent slip markings located along twin boundaries. Stress amplitudes lower than 45 MPa produce clusters of fine early persistent slip markings mainly located at triple junctions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Advanced Welding Techniques Analysis · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Bathias · 2005
2. Gigacycle fatigue of ferrous alloys10.1046/j.1460-2695.1999.t01-1-00185.x ↗
3. Influence of loading frequency on high cycle fatigue properties of b.c.c. and h.c.p. metals10.1016/S0921-5093(00)01978-X ↗
4. Fatigue and fatigue crack growth of aluminium alloys at very high numbers of cycles10.1016/S0142-1123(01)00167-0 ↗
5. A study of the fatigue limit of copper10.1007/BF02661356 ↗
6. High cycles fatigue life of metals10.1016/0025-5416(74)90057-3 ↗
7. Mughrabi H. In: Fatigue mechanisms in the ultrahigh cycle regime. Fatigue 2006. Atlanta; 2006.
8. On multi-stage fatigue life diagrams and the relevant life controlling mechanisms in ultrahigh-cycle fatigue10.1046/j.1460-2695.2002.00550.x ↗
9. Near-threshold behaviour of polycrystalline copper10.1179/msc.1981.15.5.225 ↗
10. Life-time and cyclic slip of copper in the VHCF-regime10.1016/j.ijfatigue.2007.03.010 ↗
11. Fatigue damage in copper polycrystals subjected to ultrahigh-cycle fatigue below the PSB threshold10.1016/j.ijfatigue.2009.04.004 ↗
12. Mechanisms of strain localization, crack initiation and fracture of polycrystalline copper in the VHCF regime10.1016/j.ijfatigue.2009.03.016 ↗
13. The significance of microstructural barriers during fatigue of a duplex steel in the high- and very-high-cycle-fatigue (HCF/VHCF) regime10.1016/j.ijfatigue.2009.09.010 ↗
14. Influence of grain size and precipitation state on the fatigue lives and deformation mechanisms of CP aluminium and AA6082 in the VHCF-regime10.1016/j.ijfatigue.2010.04.013 ↗
15. On the life-controlling microstructural fatigue mechanisms in ductile metals and alloys in the gigacycle regime10.1046/j.1460-2695.1999.00186.x ↗
16. Very high cycle fatigue of thin walled tubes made from austenitic stainless steel
17. Fatigue crack initiation and stage I propagation in polycrystalline materials I: Micromechanisms10.1016/0142-1123(91)90001-F ↗
18. AFM characterization of the evolution of surface deformation during fatigue in polycrystalline copper10.1016/S1359-6454(01)00271-3 ↗
19. Fatigue crack initiation by cyclic slip irreversibilities in high-cycle fatigue
20. Crack nucleation and stage I propagation in high strain fatigue-I. Microscopic and interferometric observations10.1016/0001-6160(78)90028-7 ↗
21. Crack initiation mechanisms in copper polycrystals cycled under strain amplitudes and in step tests10.1016/0025-5416(83)90076-9 ↗
22. low-cycle fatigue cracking mechanisms in fcc crystalline materials10.1080/14786435.2010.518169 ↗
23. Overview of fatigue behaviour in copper single crystals-II population, size distribution and growth kinetics of stage I cracks for tests at constant amplitude10.1016/0001-6160(89)90217-4 ↗
24. Neumann · 1988 · vol. 1
25. Pineau A, Antolovich S. Fatigue intergranulaire, dans Joints de grain et plasticité cristalline, sous la direction de Louisette Priester. Collection Traité Mécanique et Ingénierie des Matériaux. Hermès–Lavoisier: Série Matériaux et Métallurgie; 2011. p. 225–88 [chapitre 5].
26. Polak · 1994
27. Mughrabi H. Dislocations and properties of real materials (Conf. Proc.), Book no. 323. London: The Institute of Metals; 1984. p. 244–60.
28. Dislocation structures in fatigued copper single crystals10.1080/14786436408225391 ↗
29. Mughrabi H, Wang R. Cyclic deformation of face-centred cubic polycrystals: a comparison with observations on single crystals. Deformation of polycrystals: mechanisms and microstructures. In: Hansen et al. N, editor. Proceedings of 2nd risø international symposium on metallurgy and materials science. Roskilde: Risø National Laboratory; 1981. p. 87–98.
30. Fatigue fracture at copper bicrystal interfaces: fractography10.1016/S0921-5093(98)01088-0 ↗
31. The role of annealing twin boundaries in the cyclic deformation of f.c.c. materials10.1016/0921-5093(92)90094-H ↗
32. Study of cyclic strain localization and fatigue crack initiation using FIB technique10.1016/j.ijfatigue.2011.05.002 ↗
33. The origin of fatigue fracture in copper10.1080/14786435608238086 ↗
34. Early stages of fatigue in copper single crystals10.1080/14786436908225856 ↗
35. Some comments about fatigue crack initiation in relation to cyclic slip irreversibility10.1016/j.engfracmech.2007.04.014 ↗
36. Dissipation assessments during dynamic very high cycle fatigue