Effect of temperature range on thermal-mechanical fatigue properties of P92 steel and fatigue life prediction with a new cyclic softening model
Source abstract
Abstract
Abstract P92 steel is a typical steel used in the main steam pipeline of an ultra-supercritical power plant. In most cases, the main load consists of the thermal-mechanical fatigue (TMF) load due to the fluctuation of temperature and pressure during operation. TMF tests at different temperature ranges and isothermal fatigue (IF) tests at different temperatures were performed in this study. The effects of different temperature ranges on the fatigue life of P92 steel were analyzed. It was found that the TMF life decreased first and then increased, as a result of an increase in the temperature range and decrease in the mean temperature. The cyclic softening of the TMF and IF was also investigated. In addition, it was found that the typical characteristics of dynamic strain aging (DSA) occurred in the TMF and IF process. This is considered to be an important reason for the decrease in the TMF life of P92 steel. A new cyclic softening model was established to describe the cyclic softening behavior of P92 steel, and the effect of the load conditions on the cyclic softening was reflected in this model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Materials for ultra-supercritical coal power plants—boiler materials: Part 110.1361/105994901770345394 ↗
2. Materials for ultra-supercritical coal power plants—turbine materials: Part II10.1361/105994901770345402 ↗
3. Characterization of viscoplasticity behaviour of P91 and P92 power plant steels10.1016/j.ijpvp.2013.08.001 ↗
4. Micromechanical finite element modelling of TMF for P91 steels10.1016/j.ijfatigue.2015.11.025 ↗
5. Cyclic softening behaviour of a p91 steel under low cycle fatigue at high temperature10.1016/j.proeng.2011.04.182 ↗
6. Thermo-mechanical fatigue testing and simulation using a viscoplasticity model for a P91 steel10.1016/j.commatsci.2012.01.006 ↗
7. Thermal-mechanical fatigue behavior and lifetime prediction of P92 steel with different phase angles10.1016/j.ijfatigue.2017.12.021 ↗
8. Thermo-mechanical and IF behavior of 347 and 316L austenitic stainless tube and pipe steels10.1016/j.ijfatigue.2010.11.005 ↗
9. TMF evaluation and life prediction of 316L(N) stainless steel10.1016/j.ijfatigue.2008.03.019 ↗
10. Isothermal and thermal–mechanical fatigue of VVER-440 reactor pressure vessel steels10.1016/j.jnucmat.2015.01.067 ↗
11. A comparative study of isothermal and thermo-mechanical fatigue on type 316L(N) austenitic stainless steel10.1016/j.msea.2010.05.082 ↗
12. Twinning behaviors during thermo-mechanical fatigue cycling of a nickel-base single-crystal TMS-82 superalloy10.1007/s11665-013-0809-3 ↗
13. Prediction of TMF life of IN738 LC using the finite element analysis10.1007/s12541-014-0526-3 ↗
14. Thermo-mechanical fatigue behavior of the Intermetallic γ -TiAl alloy TNB-V5 with different microstructures10.1007/s11661-009-0119-4 ↗
15. TMF of single crystal superalloys: achievements and challenges10.1016/j.msea.2015.10.078 ↗
16. Deformation and damage mechanisms during thermal-mechanical fatigue of a single-crystal superalloy10.1016/j.actamat.2009.01.027 ↗
17. A new low cycle fatigue criterion for isothermal and out-of-phase thermo-mechanical loading10.1016/j.ijfatigue.2009.11.003 ↗
18. Mechanism-based TMF life prediction of cast iron. Part I: models10.1016/j.ijfatigue.2010.02.004 ↗
19. TMF life assessment of aluminium components using the damage rate model of Sehitoglu10.1016/j.ijfatigue.2007.01.054 ↗
20. Cyclic oxidation and crack growth during high strain fatigue of low alloy steel10.1179/msc.1978.12.2.64 ↗
21. Crack propagation of steels during low cycle thermal-mechanical and isothermal fatigue at elevated temperatures10.1007/BF02654392 ↗
22. Growth of small cracks and prediction of lifetime in high-temperature alloys10.1016/j.msea.2006.08.133 ↗
23. An engineering model for low cycle fatigue life based on a partition of energy and micro-crack growth10.1016/j.ijfatigue.2008.09.004 ↗
24. Temperature measurement and control methods in TMF testing – a comparison and evaluation10.1016/j.ijfatigue.2007.01.038 ↗
25. Thermal gradients in round TMF specimens10.1016/j.ijfatigue.2007.01.050 ↗
26. Occurrence of dynamic strain aging in Alloy 617M under low cycle fatigue loading10.1016/j.ijfatigue.2017.03.001 ↗
27. Dynamic strain aging, deformation and fracture behaviour of the nickel base superalloy Inconel 61710.1016/j.msea.2018.10.123 ↗
28. Characterization of high temperature deformation behavior of Inconel 61710.1016/j.mechmat.2008.10.003 ↗
29. Dynamic strain aging in low cycle fatigue of duplex titanium alloys10.1016/j.msea.2011.02.013 ↗
30. Influence of dynamic strain aging pre-treatment on the low-cycle fatigue behavior of modified 9Cr–1Mo steel10.1016/j.ijfatigue.2012.07.011 ↗
31. Effect of W addition on the low cycle fatigue behavior of high Cr ferritic steels10.1016/S0921-5093(00)01291-0 ↗
32. ASTM. Standard practice for strain controlled thermomechanical fatigue testing, US, E2386; 2010.
33. Thermo-mechanical fatigue life evaluation for Sn-Pb and Sn-Ag solders
34. Material and fatigue life models for thermo-mechanical loaded components10.1002/mawe.200800358 ↗
35. Theory of dislocations