Effect of electroless Ni-B and Ni-W-B coatings on the corrosion-fatigue behaviour of 7075 Al alloy
Source abstract
Abstract
Abstract This research experimentally determines the effect of electroless Ni-B and Ni-W-B coatings on the fatigue and corrosion-fatigue life of 7075 Al alloy substrate. SEM, XRD, fracture toughness and potentiodynamic polarization tests exhibited the characteristics of the coatings. The fatigue test results revealed that easy crack initiation from the brittle coating is the main responsible for a reduction in fatigue performance of coated specimen. The Ni-B coating offered superior resistance in terms of both corrosion and corrosion fatigue compared to Ni-W-B coating. Considerable improvement was achieved in corrosion fatigue performance of Ni-B coated specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Irausquı I, Barbera-sosa J La, Mesmacque G. International Journalof Fatigue Fatigue behavior of a 7075-T6 aluminum alloy coated with an electroless Ni – P deposit 2006;28:1854–66. https://doi.org/10.1016/j.ijfatigue.2005.12.005.10.1016/j.ijfatigue.2005.12.005 ↗
2. Influence of retrogression and re-aging treatment on corrosion behaviour of an Al – Zn – Mg – Cu alloy10.1016/j.matdes.2010.11.036 ↗
3. Jin-feng LI, Zhuo-wei P, Chao-xing LI, Zhi-qiang JIA. Mechanical properties , corrosion behaviors and microstructures of 7075 aluminium alloy with various aging treatments 2007.
4. LI J feng, PENG Z wei, LI C xing, JIA Z qiang, CHEN W jing, ZHENG Z qiao. Mechanical properties, corrosion behaviors and microstructures of 7075 aluminium alloy with various aging treatments. Trans Nonferrous Met Soc China (English Ed 2008;18:755–62. https://doi.org/10.1016/S1003-6326(08)60130-2.10.1016/S1003-6326(08)60130-2 ↗
5. Environmental effect on the fatigue performance of bare and oxide coated 7075–T6 alloy10.1016/j.engfailanal.2013.03.020 ↗
6. On fatigue crack initiation from corrosion pits in 7075–T7351 aluminum alloy10.1016/S1359-6462(00)00434-6 ↗
7. Journal of Materials Processing Technology Effect of pitting corrosion on fatigue performance of shot-peened aluminium alloy 7075–T65110.1016/j.jmatprotec.2010.03.004 ↗
8. Cirik E, Genel K. Surface & Coatings Technology Effect of anodic oxidation on fatigue performance of 7075-T6 alloy 2008;202:5190–201. https://doi.org/10.1016/j.surfcoat.2008.06.049.10.1016/j.surfcoat.2008.06.049 ↗
9. Effect of a commercial hard anodizing on the fatigue property of a 2014–T6 aluminium alloy10.1007/s10853-006-0725-0 ↗
10. ASM Handbook
11. Lee CK. Surface & Coatings Technology Corrosion and wear-corrosion resistance properties of electroless Ni – P coatings on GFRP composite in wind turbine blades 2008;202:4868–74. https://doi.org/10.1016/j.surfcoat.2008.04.079.10.1016/j.surfcoat.2008.04.079 ↗
12. Takács D, Sziráki L, Török TI, Sólyom J, Gácsi Z, Gál-solymos K. Effects of pre-treatments on the corrosion properties of electroless Ni – P layers deposited on AlMg2 alloy 2007;201:4526–35. https://doi.org/10.1016/j.surfcoat.2006.09.045.10.1016/j.surfcoat.2006.09.045 ↗
13. Baskaran I, Narayanan TSNS, Stephen A. Effect of accelerators and stabilizers on the formation and characteristics of electroless Ni – P deposits 2006;99:117–26. https://doi.org/10.1016/j.matchemphys.2005.10.001.10.1016/j.matchemphys.2005.10.001 ↗
14. Effect of thermochemical and heat treatments on electroless nickel – boron10.1016/j.matlet.2009.09.031 ↗
15. Applied Surface Science Effects of (NH 4) 2 SO 4 on the characteristics of the deposits and properties of an electroless Ni – P plating solution10.1016/j.apsusc.2011.01.016 ↗
16. Comparative study of microstructure and corrosion resistance of electroless Ni-W-P coatings treated by laser and furnace-annealing
17. Liu Y, Zhao Q. Study of electroless Ni – Cu – P coatings and their anti-corrosion properties 2004;228:57–62. https://doi.org/10.1016/j.apsusc.2003.12.031.10.1016/j.apsusc.2003.12.031 ↗
18. Liu WL, Hsieh SH, Chen WJ, Hsu YC. Applied Surface Science Growth behavior of electroless Ni – Co – P deposits on Fe 2009;255:3880–3. https://doi.org/10.1016/j.apsusc.2008.10.073.10.1016/j.apsusc.2008.10.073 ↗
19. Wu F, Tien S, Duh J, Wang J. Surface characteristics of electroless and sputtered Ni – P – W alloy coatings 2003;166:60–6.10.1016/S0257-8972(02)00725-9 ↗
20. Tien S, Duh J, Chen YI. The influence of thermal treatment on the microstructure and hardness in electroless Ni – P – W deposit 2004;470:333–8. https://doi.org/10.1016/j.tsf.2004.08.146.10.1016/j.tsf.2004.08.146 ↗
21. Balaraju JN, Rajam KS. Electroless deposition of Ni – Cu – P , Ni – W – P and Ni – W – Cu – P alloys 2005;195:154–61. https://doi.org/10.1016/j.surfcoat.2004.07.068.10.1016/j.surfcoat.2004.07.068 ↗
22. Narayanan TSNS, Selvakumar S, Stephen A. Electroless Ni – Co – P ternary alloy deposits : preparation and characteristics 2003;172:298–307. https://doi.org/10.1016/S0257-8972(03)00315-3.10.1016/S0257-8972(03)00315-3 ↗
23. Bangwei Z, Haowen X. Effect of alloying elements on the amorphous formation and corrosion resistance of electroless Ni – P based alloys 2000;281:286–91.10.1016/S0921-5093(99)00720-0 ↗
24. Review on electroless plating ni-p coatings for improving surface performance of steel10.1142/S0218625X14300020 ↗
25. The effect of nitriding on adhesion and mechanical properties of electroless Ni–P coating on AISI 4140 steel10.1080/02670844.2016.1148831 ↗
26. Fatigue behavior of a quenched and tempered AISI 4340 steel coated with an electroless Ni-P deposit10.1016/S0040-6090(99)00673-2 ↗
27. Surface characterizations of fretting fatigue damage in aluminum alloy 7075–T6 clamped joints: The beneficial role of Ni-P coatings
28. The effect of electroless Ni-P coatings on the fatigue life of Al 7075–T6 fastener holes with symmetrical slits10.1016/j.ijfatigue.2013.02.007 ↗
29. Fretting fatigue behaviour of a 2014–t6 aluminium alloy coated with an electroless nickel under rotating bending loading
30. Deposition mechanism of electroless nickel plating of composite coatings on magnesium alloy10.1016/j.ces.2019.07.048 ↗
31. Deposition DNC, Bucht M, Tkacz J, Fintov S. Improvement of AZ91 Alloy Corrosion Properties by 2020.
32. Surface & Coatings Technology Structure and wear resistance of high hardness Ni-B coatings as alternative for Cr coatings10.1016/j.surfcoat.2015.01.016 ↗
33. Krishnaveni K, Narayanan TSNS, Seshadri SK. Electroless Ni – B coatings : preparation and evaluation of hardness and wear resistance 2005;190:115–21. https://doi.org/10.1016/j.surfcoat.2004.01.038.10.1016/j.surfcoat.2004.01.038 ↗
34. Chemically Deposited Ni – W – B Coatings : Composition
35. Effects of Heat Treatment On Tribological Behavior of Electroless Ni-B Coating at Elevated Temperatures10.1142/S0218625X18500142 ↗
36. Evaluation of an electroless nickel-boron (Ni-B) coating on corrosion fatigue performance of ball burnished AISI 1045 steel
37. Scratch and Sliding Wear Testing of Electroless Ni–B–W Coating10.1115/1.4045165 ↗
38. Tribocorrosion behavior of electroless Ni-P/Ni-B duplex coating on AA7075 aluminum alloy10.1108/ILT-05-2018-0177 ↗
39. Effect of different pretreatments and heat treatment on wear properties of electroless Ni-B Coatings on 7075–T6 Aluminum Alloy10.1016/j.proeng.2014.12.322 ↗
40. Kazuhisa · NANIS Process Changes in Potential and of Aluminum Alloy during Zincate · 1996 · 47 · 61
41. Effects of zincate treatment on adhesion of electroless Ni-P coating onto various aluminum alloys10.1016/S1003-6326(08)60356-8 ↗
42. Corrosion resistance of as-plated and heat-treated electroless dublex Ni-P/Ni-B-W coatings10.17222/mit.2016.304 ↗
43. Correa · Effect of Heat Treatment on Tribological Properties of Ni-B Coatings on Low Carbon Steel : Wear Maps and Wear Mechanisms · 2019 · 141 · 1
44. Taha-tijerina J, Aviña-camarena K, Torres-sánchez R, Dominguez-ríos C, Maldonado-cortes D. Tribological evaluation of electroless Ni – B coating on metal-working tool steel 2019:1959–64.10.1007/s00170-019-03684-4 ↗
45. Lawn BR, Evans a., Marshall DB. Elastic / Plastic Indentation Damage in Ceramics : The MediadRadial Crack System I ’. J Am Ceram Soc 1980;63:574–81. https://doi.org/10.1111/j.1151-2916.1982.tb10782.x.10.1111/j.1151-2916.1980.tb10768.x ↗
46. Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials. West Conshohocken, PA: 2018. https://doi.org/10.1520/E0468-18.10.1520/E0468-18 ↗
47. Pilkey · Stress Concentration Factors. Peterson’s · 1974
48. Genel K, Demirkol M, Gu T. Corrosion fatigue behaviour of ion nitrided AISI 4140 steel 2000;288:91–100.10.1016/S0921-5093(00)00835-2 ↗
49. Mechanical properties and scratch test resistance of nickel-boron coated aluminium alloy after heat treatments10.1016/j.surfcoat.2007.12.001 ↗
50. Di Giampaolo a. R, Ordoñez JG, Gugliemacci JM, Lira J. Electroless nickel-boron coatings on metal carbides. Surf Coatings Technol 1997;89:127–31. https://doi.org/10.1016/S0257-8972(96)03089-7.10.1016/S0257-8972(96)03089-7 ↗
51. Nanocrystalline Ni-B coating surface strengthening pure copper10.1016/j.apsusc.2005.12.169 ↗
52. The effects of deposition parameters on surface morphology and crystallographic orientation of electroless Ni-B coatings10.1007/s12540-011-0210-4 ↗
53. Nickel-boron electrochemical properties investigations10.1016/j.jallcom.2010.05.168 ↗
54. Fontana · 1987
55. Surface & Coatings Technology Wear and corrosion resistance of heat treated and as-plated Duplex NiP / NiB coatings on 2024 aluminum alloys10.1016/j.surfcoat.2012.01.049 ↗
56. Preparation and properties of a novel nano Ni-B-Sn by electroless deposition on 7075–T6 aluminum alloy for aerospace application10.1016/j.jallcom.2019.01.245 ↗
57. Kanta · Wear and corrosion resistance behaviours of autocatalytic electroless plating · 2009 · 486 · 21
58. Structure and properties of multicomponent and composite layers produced by combined surface engineering methods10.1016/j.surfcoat.2003.10.090 ↗
59. Fatigue behavior and FEM modeling of thin-coated components10.1016/j.ijfatigue.2003.08.009 ↗
60. Modelling, production and characterisation of duplex coatings (HVOF and PVD) on Ti-6Al-4V substrate for specific mechanical applications10.1016/j.surfcoat.2007.02.041 ↗
61. Fatigue cracking in materials with brittle surface coatings10.1016/0956-716X(93)90315-J ↗
62. A Review of the Fatigue Behaviour of Components Coated with Thin Hard Corrosion-Resistant Coatings10.2174/1876503301104010009 ↗
63. Hibbeler · 2013
64. Electroless Plating: Fundamentals and Applications
65. Mechanical Behavior of Materials
66. Genel · The effect of pitting on the bending fatigue performance of high-strength aluminum alloy · 2007 · 57 · 297
67. The corrosion resistance of electroless deposited nano-crystalline Ni-P alloys10.1016/j.electacta.2007.11.071 ↗
68. Nanostructured electroless nickel-boron coatings for wear resistance10.1016/B978-0-85709-211-3.00007-8 ↗
69. Wear and corrosion resistance of heat treated and as-plated Duplex NiP / NiB coatings on 2024 aluminum alloys10.1016/j.surfcoat.2012.01.049 ↗
70. Comparative study of corrosion-fatigue in aircraft materials10.2514/2.1308 ↗
71. A Numerical Study of the Tensile Stress Concentration in a Hemi-ellipsoidal Corrosion Pit on a Plate10.1007/s13296-018-0134-7 ↗
72. The Cyclic Properties of Engineering Materials10.1016/0956-7151(94)90493-6 ↗
73. Deformation and Fracture Mechanics of Engineering Materials