Rolling contact fatigue properties of ultrasonic surface rolling treated 25CrNi2MoV steel under different lubricant viscosities
Source abstract
Abstract
Abstract Ultrasonic surface rolling (USR) treatment was subjected to the 25CrNi2MoV shaft steel surface. The rolling contact fatigue (RCF) properties of treated samples under different lubricant viscosities were investigated. Results showed that the USR treatment significantly refined the surface grains, improved the surface hardness and generated a compressive residual stress (CRS) field in the subsurface layer. Reduced surface roughness changed the lubrication regime between contact pairs and relieved the local surface stress concentration. USR treatment is an effective way to improve the RCF life under high lubricant viscosity. Moreover, the dominant failure mode of USR treated sample was delamination.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Metal Alloys Wear and Properties · Tribology and Lubrication Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Time-variant reliability analysis for industrial robot RV reducer under multiple failure modes using Kriging model10.1016/j.ress.2020.106936 ↗
2. Numerical modelling of fatigue crack's initiation in rolling contact of sintered steels10.1016/j.jmatprotec.2005.02.133 ↗
3. On propagation of short rolling contact fatigue cracks10.1046/j.1460-2695.2003.00657.x ↗
4. Spalling formation mechanism for gears10.1016/S0043-1648(03)00126-1 ↗
5. 4D observations of rolling contact fatigue processes by laminography using ultra-bright synchrotron radiation10.1016/j.engfracmech.2017.03.021 ↗
6. Experimental investigation on the effect of shot peening on contact fatigue strength for carburized and quenched gears10.1016/j.ijfatigue.2017.09.015 ↗
7. Effect of slide burnishing of shoulder fillets on the fatigue strength of X19NiCrMo4 steel shafts10.1007/s00170-019-04815-7 ↗
8. Carburization induced extra-long rolling contact fatigue life of high carbon bearing steel10.1016/j.ijfatigue.2019.105351 ↗
9. Rolling contact fatigue crack propagation in nitrided alloyed steels10.1177/1350650117717824 ↗
10. Fatigue resistance and failure mechanisms of plasma-sprayed CrC–NiCr cermet coatings in rolling contact10.1016/j.ijfatigue.2008.10.006 ↗
11. Investigation of a novel functionally graded material for the repair of premium hypereutectoid rails using laser cladding technology10.1016/j.compositesb.2017.07.089 ↗
12. Finite element modeling of ultrasonic surface rolling process10.1016/j.jmatprotec.2011.07.009 ↗
13. Effect of ultrasonic surface rolling at low temperatures on surface layer microstructure and properties of HIP Ti-6Al-4V alloy10.1016/j.surfcoat.2017.01.099 ↗
14. Improving the fretting and corrosion fatigue performance of 300M ultra-high strength steel using the ultrasonic surface rolling process10.1016/j.ijfatigue.2018.11.017 ↗
15. Effect of ultrasonic surface rolling process on impact-sliding wear behavior of the 690 alloy10.1016/j.triboint.2019.02.008 ↗
16. The influence of ultrasonic surface rolling on the fatigue and wear properties of 23-8N engine valve steel10.1016/j.ijfatigue.2019.04.010 ↗
17. Effects of Base Oil Viscosity and Type on Bearing Ball Fatigue10.1080/05698196208972464 ↗
18. The effect of surface texturing in soft elasto-hydrodynamic lubrication10.1016/j.triboint.2008.06.008 ↗
19. Lubrication Regimes in High-Performance Polymer Spur Gears10.1155/2013/987251 ↗
20. Surface initiated rolling contact fatigue based on the asperity point load mechanism—A parameter study10.1016/j.wear.2012.07.005 ↗
21. Effects of Microstructure Evolution on Fretting Wear Behaviors of 25CrNi2MoVE Steel under Different Tempering States10.3390/met10030351 ↗
22. Effect of ultrasonic surface rolling on microstructure and rolling contact fatigue behavior of 17Cr2Ni2MoVNb steel10.1016/j.surfcoat.2019.03.061 ↗
23. Rolling contact fatigue property and failure mechanism of carburized 30CrSiMoVM steel at elevated temperature10.1016/j.triboint.2016.02.036 ↗
24. The influence of grain orientation on the mode and rate of fatigue crack growth inα-titanium10.1007/BF02654715 ↗
25. Effect of grain boundaries on texture formation during dynamic recrystallization of magnesium alloys10.1016/j.actamat.2017.01.063 ↗
26. Surface nanocrystallization of body-centered cubic beta phase in Ti–6Al–4V alloy subjected to ultrasonic surface rolling process10.1016/j.surfcoat.2019.01.045 ↗
27. Revealing the surface nano-enhancing mechanism of α-titanium alloy by microstructure evolution10.1016/j.matlet.2015.07.067 ↗
28. The martensite phases in 304 stainless steel10.1007/BF02642003 ↗
29. Holzwarth U, Gibson N. The scherrer equation versus the 'Debye-Scherrer equation'. Nat Nanotechnol 2011;6:534. https://doi.org/10.1038/nnano.2011.145.10.1038/nnano.2011.145 ↗
30. Evolution of the microstructure in microcrystalline silicon prepared by very high frequency glow-discharge using hydrogen dilution10.1063/1.372311 ↗
31. Grain size effects on the fatigue response of nanocrystalline metals10.1016/S1359-6462(03)00393-2 ↗
32. Geometrically necessary twins and their associated size effects10.1016/j.scriptamat.2008.02.052 ↗
33. The dislocation behaviour and GND development in a nickel based superalloy during creep10.1016/j.ijplas.2019.02.015 ↗
34. Investigations of dislocation-type evolution and strain hardening during mechanical twinning in Fe-22Mn-0.6C twinning-induced plasticity steel10.1016/j.actamat.2020.05.062 ↗
35. Selective increase in CO 2 electroreduction activity at grain-boundary surface terminations10.1126/science.aao3691 ↗
36. Zhang Y, Wang J, Shan H, Zhao K. Strengthening high-stacking-fault-energy metals via parallelogram nanotwins. Scripta Mater 2015;108:35-39.https://doi.org/10.1016/j.scriptmamt.2015.05.039.10.1016/j.scriptamat.2015.05.039 ↗
37. Effects of grain boundary- and triple junction-character on intergranular fatigue crack nucleation in polycrystalline aluminum10.1007/s10853-007-2236-z ↗
38. Investigations on the nanocrystallization of 40Cr using ultrasonic surface rolling processing10.1016/j.apsusc.2008.06.034 ↗
39. Effect of ultrasonic surface rolling on surface layer properties and fretting wear properties of titanium alloy Ti5Al4Mo6V2Nb1Fe10.1016/j.surfcoat.2020.125612 ↗
40. Materials selection for hot stamped automotive body parts: an application of the Ashby approach based on the strain hardening exponent and stacking fault energy of materials10.1016/j.matdes.2014.06.011 ↗
41. Strain-induced martensitic transformation near twin boundaries in a biomedical Co–Cr–Mo alloy with negative stacking fault energy10.1016/j.actamat.2012.11.041 ↗
42. Residual stresses in thin film systems: Effects of lattice mismatch, thermal mismatch and interface dislocations10.1016/j.ijsolstr.2013.06.022 ↗
43. Prediction of fatigue crack growth rate in welding residual stress field10.1016/0013-7944(89)90089-1 ↗
44. Wu CS, Klaus EE, Duda JL. Development of a method for the prediction of pressure-viscosity coefficients of lubricating oils based on free-volume theory. J Tribol-T ASME 1989;111:121-128. https://doi.org/10.1115/1.3261861.10.1115/1.3261861 ↗
45. Gu YQ. Identification of friction modes and analys is of friction characteristics of mechanical face seals. Springer Netherlands 1992. https://doi.org/10.1007/978-94-011-2412-6_19.10.1007/978-94-011-2412-6_19 ↗
46. Effects of peak stress and stress amplitude on multiaxial transformation ratchetting and fatigue life of superelastic NiTi SMA micro-tubes: experiments and life-prediction model10.1016/j.ijfatigue.2016.12.006 ↗
47. Zhang ZQ, Gao CK, Yin XL. Study on the effect of lubricant's viscosity on geared fatigue life. Mechanical Engineering and Automation 2008:79-81. (in Chinese) https://doi.org/10.3969/j.issn.1672-6413.2008.06.029.
48. Effects of service condition on rolling contact fatigue failure mechanism and lifetime of thermal spray coatings—A review10.3901/CJME.2014.0825.140 ↗
49. Fatigue life prediction of additively manufactured material: Effects of surface roughness, defect size, and shape10.1111/ffe.12799 ↗
50. The formation of spherical wear debris in mode II fatigue cracks10.1016/0043-1648(82)90118-1 ↗
51. Spalling depth prediction model10.1016/j.wear.2008.12.064 ↗
52. An experimental methodology for characterizing fracture of hard thin films under cyclic contact loading10.1016/j.tsf.2009.07.199 ↗
53. Ring crack propagation in silicon nitride under rolling contact10.1016/S0043-1648(01)00592-0 ↗
54. Chen L, Chen Q, Shao E. Study on initiation and propagation angles of subsurface cracks in GCr15 bearing steel under rolling contact. Wear 1989;133(2):205-218. https://doi.org/10.1016/0043-1648(89)90036-7.10.1016/0043-1648(89)90036-7 ↗