The low-cycle fatigue property, damage mechanism and life prediction of compacted graphite iron: Influence of strain rate
Source abstract
Abstract
Abstract The low cycle fatigue (LCF) damage mechanism and fatigue life of compacted graphite iron (CGI) at two strain rates were compared and analyzed at different temperatures. The results show that the strain rate has only little effect on the fatigue life of CGI at 25 °C, but the fatigue life reduces significantly with the decrease of strain rate at high temperatures (400 °C, 500 °C). The variation trend of fatigue life at 400 °C may be attributed to the initial cyclic hardening caused by the dynamic strain aging (DSA) effect combined with the serious damage localization of CGI. At 500 °C, the cyclic hardening is inhibited by serious oxidation. The fatigue life decreases with the decrease of strain rate can be ascribed to more oxidative damage and much serious grain boundary cracking. A prediction model for the fatigue life based on quadratic function relation was established through hysteresis energy and the variety of parameters (W0, β ) was explained by the corresponding damage mechanism. The quadratic relationships between the parameters and temperature can effectively predict the variation tendency of fatigue life versus temperature (0–650 °C).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Graphite, nuclear technology, radiation studies · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Mechanical, wear and heat exposure properties of compacted graphite cast iron at elevated temperatures10.1016/j.jallcom.2009.07.098 ↗
2. Davis JR, editor. ASM specialty handbook: Cast Irons, Mater Park, 1996;44073: 16–20.
3. Optimization of the process parameters affecting the microstructures and properties of compacted graphite iron10.1016/j.jallcom.2008.09.082 ↗
4. The high cycle fatigue, deformation and fracture of compacted graphite iron: influence of temperature10.1016/j.msea.2018.01.025 ↗
5. Thermo-mechanical fatigue property and life prediction of vermicular graphite iron10.1016/j.msea.2017.05.035 ↗
6. Investigation into diesel engine cylinder head failure10.1016/j.engfailanal.2018.03.008 ↗
7. Influence of temperature on the high-cycle fatigue properties of compacted graphite iron10.1016/j.ijfatigue.2018.02.034 ↗
8. Failure analysis of a diesel engine cylinder head based on finite element method10.1016/j.engfailanal.2013.07.023 ↗
9. Dynamic strain ageing in iron alloys: the shielding effect of carbon10.1016/j.actamat.2016.04.018 ↗
10. Time-dependent ratchetting experiments of SS304 stainless steel10.1016/j.ijplas.2005.05.006 ↗
11. Deformation mechanism and fatigue life of an Al-12Si alloy at different temperatures and strain rates10.1016/j.ijfatigue.2019.06.023 ↗
12. Dependence of dynamic strain ageing on strain amplitudes during the low-cycle fatigue of TP347H austenitic stainless steel at 550 °C10.1016/j.ijfatigue.2013.07.010 ↗
13. Multifractality and randomness in the unstable plastic flow near the lower strain-rate boundary of instability10.1103/PhysRevE.77.026111 ↗
14. A low cycle fatigue model for low carbon manganese steel including the effect of dynamic strain aging10.1016/j.msea.2015.12.022 ↗
15. Transition of tensile strength and damaging mechanisms of compacted graphite iron with temperature10.1016/j.msea.2016.09.035 ↗
16. High-cycle fatigue properties prediction and damage mechanisms of RuT400 compacted graphite iron at different temperatures10.1016/j.msea.2019.138248 ↗
17. Cyclic slip irreversibilities and the evolution of fatigue damage10.1007/s11661-009-9839-8 ↗
18. Fatigue, an everlasting materials problem-still en vogue10.1016/j.proeng.2010.03.003 ↗
19. Thompson N, Wadsworth N, Louat N, Xi. The origin of fatigue fracture in copper. Philos Mag 1956;1(2): 14.10.1080/14786435608238086 ↗
20. A model for the fatigue of copper at low plastic strain amplitudes10.1080/14786437408207230 ↗
21. Fundamental aspects of low amplitude cyclic deformation in face-centred cubic crystals10.1016/0079-6425(92)90006-S ↗
22. Dependence of intergranular fatigue cracking on the interactions of persistent slip bands with grain boundaries10.1016/S1359-6454(02)00399-3 ↗
23. Fatigue cracking at twin boundaries: effects of crystallographic orientation and stacking fault energy10.1016/j.actamat.2012.02.016 ↗
24. Assessment of local deformation using EBSD: quantification of local damage at grain boundaries10.1016/j.matchar.2012.02.001 ↗
25. Molecular dynamics simulation of tensile deformation and fracture of γ-TiAl with and without surface defects10.1016/j.jmst.2015.12.001 ↗
26. Detailed evolution mechanism of interfacial void morphology in diffusion bonding
27. Ultra-long cycle fatigue of high-strength carbon steels. Part II: estimation of fatigue limit for failure from internal inclusions10.1016/S0921-5093(03)00136-9 ↗
28. The physics of fatigue crack initiation10.1016/j.ijfatigue.2012.10.009 ↗
29. Bayraktar E, Garcias IM, Bathias C. Failure mechanisms of automotive metallic alloys in very high cycle fatigue range. Int J Fatigue 28, 11, 1590–1602.10.1016/j.ijfatigue.2005.09.019 ↗
30. The low-cycle fatigue, fracture and life prediction of compacted graphite iron: Influence of temperature10.1016/j.msea.2019.138101 ↗
31. Low-cycle fatigue properties and life prediction of Al-Si piston alloy at elevated temperature10.1016/j.msea.2017.08.014 ↗
32. Extraordinary Bauschinger effect in gradient structured copper10.1016/j.scriptamat.2018.03.007 ↗
33. Dislocation theory of yielding and strain ageing of iron10.1088/0370-1298/62/1/308 ↗
34. Effect of dynamic strain aging on the microstructure and mechanical properties of a reactor pressure vessel steel10.1016/j.msea.2013.09.091 ↗
35. Grain boundary effects on cyclic deformation and fatigue damage10.1016/j.pmatsci.2008.06.001 ↗
36. Controllable fatigue cracking mechanisms of copper bicrystals with a coherent twin boundary
37. Extremely-low-cycle fatigue behaviors of Cu and Cu–Al alloys: damage mechanisms and life prediction10.1016/j.actamat.2014.10.002 ↗
38. Low-cycle and extremely-low-cycle fatigue behaviors of high-Mn austenitic TRIP/TWIP alloys: property evaluation, damage mechanisms and life prediction10.1016/j.actamat.2015.11.015 ↗
39. Low-cycle fatigue behavior and Life prediction of copper busbar10.1002/adem.201500561 ↗
40. Exploration on the unified model for fatigue properties prediction of metallic materials
41. Thermo-mechanical fatigue behavior and life prediction of the Al-Si piston alloy10.1016/j.msea.2017.12.099 ↗
42. An improved technique for the prediction of axial fatique life from tensile data10.1016/0142-1123(93)90179-T ↗