Effect of chloride concentration on the corrosion–fatigue crack behavior of an age-hardenable martensitic stainless steel
Source abstract
Abstract
Abstract Crack growth rate and S–N fatigue testing of Custom 465-H950 was performed in 0.0006–3 M NaCl with different levels of pre-exposure. Custom 465-H950 exhibited a strong corrosion resistance to various NaCl-based exposures. Concurrent exposure and loading did not result in corrosion damage sufficiently severe to drive crack formation away from microstructure features (TiC particles). The total fatigue life of precorroded specimens (pit depth ≈40 μm, surface diameter ≈175 μm) increased 4–9 fold as [Cl−] decreased from 3.0 M to 0.0006 M. Detailed analysis demonstrated that the varying [Cl−] most strongly influenced the initiation life, with secondary contributions from the long- and short-crack propagation regimes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Advanced materials development in commercial aircraft
2. Structural material trends in commercial aircraft
3. Hale J. Boeing 787: from the ground up. In: Aeromagazine, Boeing; 2006.
4. Leygraf · 2000
5. Wetting phenomena and time of wetness in atmospheric corrosion: a review10.1515/corrrev-2012-0015 ↗
6. An analytical modeling method for calculating the current delivery capacity of a thin-film cathode and the stability of localized corrosion under atmospheric environments10.1149/1.2789248 ↗
7. Beutner · 2011
8. Cole GK, Clark G, Sharp PK. The implication of corrosion with respect to aircraft structural integrity. Report DSTO-RR-0201, Melbourne, Australia; 1997.
9. Corrosion and fatigue research – structural issues and relevance to naval aviation10.1016/S0142-1123(01)00115-3 ↗
10. Scientific advances enabling next generation management of corrosion induced fatigue10.1016/j.proeng.2011.04.062 ↗
11. Fatigue issues in aircraft maintenance and repairs10.1016/S0142-1123(97)00029-7 ↗
12. Lessons neglected: effects of moist air on fatigue and fatigue crack growth in aluminum alloys
13. Ultrahigh-strength steels for aerospace applications10.1007/BF03220942 ↗
14. Designing nanoprecipitation strengthened UHS stainless steels combining genetic algorithms and thermodynamics10.1016/j.commatsci.2008.05.003 ↗
15. The effects of sacrificial coatings on hydrogen embrittlement and re-embrittlement of ultra high strength steels10.1016/j.corsci.2007.11.023 ↗
16. Anodic polarization behavior of high-purity 13 and 18% Cr stainless steels10.1149/1.2134307 ↗
17. The role of alloyed molybdenum in the inhibition of pitting corrosion in stainless steels10.1016/S0010-938X(00)00086-X ↗
18. Lee · 2009
19. Carpenter. Custom 465 stainless- technical datasheet; 2013. 05/17/13 11/25/13. Available from: .
20. A linear friction welding process model for Carpenter Custom 465 precipitation-hardened martensitic stainless steel: a weld microstructure-evolution analysis
21. Environment-assisted cracking in Custom 465 stainless steel10.1007/s11661-010-0401-5 ↗
22. Pioszak G. Hydrogen assisted cracking of ultra-high strength steels. PhD dissertation. Charlottesville, VA: Department of Materials Science and Engineering, University of Virginia; 2015.
23. Frazier · 1928 · vol. III
24. The modeling and measurement of boundary conditions for pit size on stainless steels under atmospheric exposure conditions10.1149/1.3697575 ↗
25. Potential control under thin aqueous layers using a Kelvin Probe10.1016/j.corsci.2006.10.017 ↗
26. On the atmospheric corrosion of metals which are covered with thin electrolyte layers. 2. Experimental results10.1016/0010-938X(90)90033-2 ↗
27. On the atmospheric corrosion of metals which are covered with thin electrolyte layers. 3. The measurement of polarization curves on metal-surfaces which are covered by thin electrolyte layers10.1016/0010-938X(90)90034-3 ↗
28. 1995
29. Corrosion fatigue crack propagation in metals
30. Warner JS. Inhibition of environmental fatigue crack propagation in age-hardenable aluminum alloys. PhD dissertation. Charlottesville, VA: Department of Materials Science and Engineering, University of Virginia; 2010.
31. Investigation of corrosion fatigue phenomena in transient zone and preventive coating and blade design against fouling and corrosive environment for mechanical drive turbines10.5293/IJFMS.2008.1.1.121 ↗
32. Effect of microstructure on pitting and corrosion fatigue of 17–4 PH turbine blade steel in chloride environments10.5006/1.3577350 ↗
33. Corrosion fatigue of a 12%Cr low pressure turbine blade steel in simulated service environments10.1016/j.ijfatigue.2005.06.031 ↗
34. Corrosion fatigue of precipitation-hardening martensitic stainless steel10.5006/1.3280780 ↗
35. Intergranular fracture in 13wt% chromium martensitic stainless steel10.1007/BF01114734 ↗
36. Fatigue and tensile properties of EB welded 17–4 PH steel-evaluation showed that EBW resulted in minimal loss in tensile strength
37. Effects of surface preparation on pitting resistance, residual stress, and stress corrosion cracking in austenitic stainless steels10.1361/105994901770344638 ↗
38. Ebara · 1978 · 155
39. Corrosion fatigue crack initiation behavior of stainless steels10.1016/j.proeng.2010.03.141 ↗
40. The role of stress-assisted localized corrosion in the development of short fatigue cracks
41. 6.04 – Environment-assisted fatigue in liquid environments
42. Driving forces for localized corrosion-to-fatigue crack transition in Al–Zn–Mg–Cu10.1111/j.1460-2695.2011.01568.x ↗
43. Challenges in modelling the evolution of stress corrosion cracks from pits10.1016/j.engfracmech.2008.09.004 ↗
44. Aspects of the effects of electrolyte-composition on the occurrence of metastable pitting on stainless-steel10.1016/0010-938X(94)90041-8 ↗
45. Pit growth studies in stainless steel foils. II. Effect of temperature, chloride concentration and sulphate addition10.1016/S0010-938X(01)00134-2 ↗
46. Electrochemical corrosion behavior of 300M ultra high strength steel in chloride containing environment
47. Effect of strain and chloride concentration of pitting susceptibility for type 304 austenitic stainless steel10.1016/S1004-9541(08)60080-4 ↗
48. Ritchie · 1986
49. Gangloff RP. Corrosion fatigue crack propagation in metals. In: NASA: international conference on environment induced cracking of metals, Kohler, WI; 1990.
50. The environmentally small/short crack growth effect: current understanding10.1515/corrrev-2012-0003 ↗
51. Fatigue crack propagation of 444 stainless steel welded joints in air and in 3%NaCl aqueous solution10.1016/j.matdes.2004.10.004 ↗
52. Fatigue crack growth of two pipeline steels in a pressurized hydrogen environment
53. Corrosion fatigue behaviour of a 15Cr–6Ni precipitation-hardening stainless steel in different tempers10.1046/j.1460-2695.2000.00313.x ↗
54. An evaluation of the crack growth and fracture properties of AISI 403 modified 12 Cr stainless steel10.1016/0013-7944(75)90064-8 ↗
55. Crack size effects on the chemical driving force for aqueous corrosion fatigue10.1007/BF02814848 ↗
56. Corrosion fatigue crack propagation in metals
57. Hydrogen assisted cracking of high strength alloys
58. Methods for studying the solution chemistry within stress corrosion cracks10.1149/1.2411799 ↗
59. Solution chemistry within stress-corrosion cracks in alloy steels10.1016/S0010-938X(70)80102-0 ↗
60. Electrochemical conditions at tip of an advancing stress corrosion crack in AISI-4340 steel10.5006/0010-9312-26.12.539 ↗
61. Solution chemistry within cracks in steel
62. Crack tip chemistry and electrochemistry of environmental cracks in AA 705010.1016/j.corsci.2006.12.001 ↗
63. Repetitive nucleation of corrosion pits on stainless steel and the effects of surface roughness10.1149/1.1416503 ↗
64. Characterization of the roles of electrochemistry, convection and crack chemistry in stress corrosion cracking
65. Environmental influences on the aqueous fatigue crack growth rates of HY-130 steel
66. A model of crack electrochemistry for steels in the active state based on mass transport by diffusion and ion migration10.1149/1.2124176 ↗
67. Experimental determination of the electrochemistry in corrosion fatigue cracks in structural steel in artificial seawater10.5006/1.3582026 ↗
68. Environment-assisted cracking in Custom 465 stainless steel10.1007/s11661-010-0401-5 ↗
69. Sedricks · 1996
70. Effect of iron additions on structure of Laves phases in Nb–Cr–Fe alloys10.1016/0921-5093(93)90495-Z ↗
71. Heat treatment of investment cast PH 13–8 Mo stainless steel: Part I. Mechanical properties and microstructure10.1007/BF02665455 ↗
72. Precipitation hardening in a PH 13–8 Mo stainless steel10.1016/0025-5416(81)90034-3 ↗
73. Precipitation reactions and strengthening behavior in 18 Wt Pct nickel maraging steels10.1007/BF02646061 ↗
74. Schaller · 2014
75. The solution composition and electrode potential in pits, crevices and cracks10.1016/0010-938X(83)90014-8 ↗
76. The initiation of pitting corrosion on austenitic stainless steel: on the role and importance of sulphide inclusions10.1016/0010-938X(92)90074-D ↗
77. Laser surface modification for improving localised corrosion resistance of austenitic stainless steels10.1179/sur.1997.13.4.299 ↗
78. Sudden onset of pitting corrosion on stainless steel as a critical phenomenon10.1126/science.1101358 ↗
79. Direct current electrical potential measurement of the growth of small cracks
80. Direct current potential difference fatigue crack measurement techniques
81. ASTM. E647-05: standard test methods for measurement of fatigue crack growth rates, vol. 03.01. West Conshohocken, PA: ASTM International; 2006.
82. ASTM. E466-07: standard practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials. West Conshohocken, PA: ASTM International; 2007.
83. Effect of initiation feature on microstructure-scale fatigue crack propagation in Al–Zn–Mg–Cu10.1016/j.ijfatigue.2011.08.001 ↗
84. A simplified laboratory approach for the prediction of short crack behavior in engineering structures10.1111/j.1460-2695.1988.tb01183.x ↗
85. Effect of corrosion severity on fatigue evolution in Al–Zn–Mg–Cu10.1016/j.corsci.2009.10.006 ↗
86. Fatigue crack formation and growth from localized corrosion in Al–Zn–Mg–Cu10.1016/j.engfracmech.2008.11.005 ↗
87. Fatigue as a process of cyclic brittle microfracture10.1111/j.1460-2695.2005.00857.x ↗
88. The role of air in fatigue load interaction10.1046/j.1460-2695.2003.00582.x ↗
89. Equivalent initial flaw size testing and analysis of transport aircraft skin splices10.1046/j.1460-2695.2003.00637.x ↗
90. Donahue · 2015
91. Threshold-stress determination using tapered specimens and cyclic stresses
92. Effect of loading rate on environmentally controlled cracking of sensitized 304 stainless steel in high purity water10.5006/0010-9312-36.11.597 ↗
93. Stress-corrosion cracking of AISI 4340 steel in aqueous environments10.1007/s11661-010-0335-y ↗
94. Corrosion fatigue crack growth of AISI 4340 steel10.1016/j.ijfatigue.2012.10.015 ↗
95. The effects of anions on the behavior of scratched iron electrodes in aqueous-solutions10.1016/0010-938X(80)90145-6 ↗
96. Fatigue life estimation of pitted 12% Cr steam turbine blade steel in different environments and at different stress ratios10.1016/j.ijfatigue.2013.10.003 ↗
97. Corrosion pitting and environmentally assisted small crack growth
98. Study on the mechanism of high-cycle corrosion fatigue crack initiation in X80 steel10.1016/j.corsci.2011.12.029 ↗
99. Novel images of the evolution of stress corrosion cracks from corrosion pits10.1016/j.corsci.2011.05.050 ↗
100. The modeling and measurement of boundary conditions for pit size on stainless steels under atmospheric exposure conditions10.1149/1.3697575 ↗