The effect of defects and notches in quasi-static and fatigue loading of Inconel 718 specimens produced by selective laser melting
Source abstract
Abstract
Additively manufactured components are likely to contain defects deriving from the manufacturing process. They are also likely to be designed with high geometric complexity (including notches), due to very few design-limitations. In order to understand the influence of these two types of geometric features, we here investigate as-built Inconel 718 specimens produced by selective laser melting under quasi-static and cyclic loading. Notched and unnotched specimens are considered, and the main emphasis is set on the influence of the defects and on how they influence the failure locations at different load levels.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A review of mechanical properties of additively manufactured Inconel 718
2. A review of geometric sensitivities in laser metal 3d printing
3. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
4. Metal additive manufacturing: a review of mechanical properties10.1146/annurev-matsci-070115-032024 ↗
5. Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research10.1016/j.ijfatigue.2015.12.003 ↗
6. Influence of defects and as-built surface roughness on fatigue properties of additively manufactured alloy 71810.1016/j.msea.2018.08.072 ↗
7. Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V10.1016/j.ijfatigue.2018.07.013 ↗
8. Methods for rapid pore classification in metal additive manufacturing
9. Defect characteristics and analysis of their variability in metal l-pbf additive manufacturing10.1016/j.matdes.2019.108091 ↗
10. An improved prediction of residual stresses and distortion in additive manufacturing10.1016/j.commatsci.2016.10.003 ↗
11. Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime10.1016/j.ijfatigue.2016.05.018 ↗
12. The influence of porosity on fatigue crack initiation in additively manufactured titanium components10.1038/s41598-017-06504-5 ↗
13. Fatigue properties of alsi10mg obtained by additive manufacturing: defect-based modelling and prediction of fatigue strength10.1016/j.engfracmech.2017.11.002 ↗
14. An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing10.1016/j.ijfatigue.2018.08.034 ↗
15. On the size and orientation effect in additive manufactured ti-6al-4v10.1016/j.matdes.2019.108235 ↗
16. Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured inconel 718 superalloy10.1016/j.msea.2015.06.021 ↗
17. On the microstructural and mechanical properties of post-treated additively manufactured inconel 718 superalloy under quasi-static and cyclic loading10.1016/j.msea.2016.05.089 ↗
18. What is going on with fatigue of additively manufactured metals?
19. Chapter 2 - stress concentration
20. Notch fatigue and crack growth resistance of Ti-6Al-4V eli additively manufactured via selective laser melting: a critical distance approach to defect sensitivity10.1016/j.ijfatigue.2018.12.020 ↗
21. Fatigue behaviour of notched additive manufactured Ti6Al4V with as-built surfaces10.1016/j.ijfatigue.2017.04.009 ↗
22. Notch-defect interaction in additively manufactured inconel 71810.1016/j.ijfatigue.2018.12.021 ↗
23. Effect of notches on the deformation behavior and damage evolution of additively manufactured 316l specimens under uniaxial quasi-static and cyclic loading. Int J Fatigue 2019;127: 175–89.10.1016/j.ijfatigue.2019.05.018 ↗
24. A diagram for capturing and predicting failure locations in notch geometries produced by additive manufacturing
25. Fracture behaviour of notched as-built ebm parts: characterization and interplay between defects and notch strengthening behaviour10.1016/j.tafmec.2018.10.004 ↗
26. ASTM, E407–07(2015) e1 standard practice for microetching metals and alloys, Standard ASTM E407–07, ASTM International, West Conshohocken, PA; 2015.
27. An analytical relation between the weibull and basquin laws for smooth and notched specimens and application to constant amplitude fatigue
28. Effect of notch root radius on tensile behaviour of 316l(n) stainless steel10.1179/1878641314Y.0000000020 ↗
29. Notch effect of materials: strengthening or weakening?10.1016/j.jmst.2014.04.014 ↗
30. Notch strengthening or weakening governed by transition of shear failure to normal mode fracture10.1038/srep10537 ↗
31. Current surface issues in additive manufacturing10.1002/ppap.201900154 ↗
32. Geometrical effects in fatigue: a unifying theoretical model10.1016/S0142-1123(99)00007-9 ↗
33. Numerical modelling of surface roughness effect on the fatigue behavior of Ti-6Al-4V obtained by additive manufacturing10.1016/j.ijfatigue.2019.02.014 ↗
34. Mixed mode fatigue crack growth: a literature survey10.1016/S0013-7944(96)00071-9 ↗
35. The linear-elastic theory of critical distances to estimate high-cycle fatigue strength of notched metallic materials at elevated temperatures10.1111/ffe.12273 ↗
36. Enhancing fatigue strength of selective laser melting-fabricated Inconel 718 by tailoring heat treatment route10.1002/adem.201800307 ↗
37. Applicability of fracture mechanics to very small cracks in the early stage