Effect of cyclic plastic strain on fatigue crack growth
Source abstract
Abstract
Abstract Because fatigue life calculations, which are based on the stress intensity factor, are restricted to certain limited applications, one must develop substitute procedures in more general settings. Various proposals for a crack driving force parameter in elastic–plastic fracture mechanics will be discussed. A preference in favour of the cyclic ΔJ-integral is elaborated, keeping its theoretical limitations in mind. Crack closure is also an important issue under large-scale yielding conditions. Experience cannot be extrapolated from the small-scale to the large-scale cyclic yielding regime or vice versa. The consequences for fatigue lives under variable amplitude and multiaxial loading are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. McClung RC, Chell GG, Lee Y-D, Russel DA, Orient GE. Development of a practical methodology for elastic–plastic and fully plastic fatigue crack growth. Report NASA/CR-1999-209428, Marshall Space Flight Center, NASA Center for Aerospace Information, Linthicum Heights, MD; 1999.
2. Crack nucleation and growth in high strain low cycle fatigue
3. McEvily AJ. Fatigue crack growth and strain intensity factor. In: Proc air force conf on fatigue and fracture of aircraft structures and materials, Miami Beach, AFFDL-TR-70-144. p. 451–8.
4. El Haddad MH, Smith KH, Topper TH. A strain based intensity factor solution for short fatigue cracks initiating from notches. In: Fracture mechanics, ASTM STP 677; 1979. p. 274–89.10.1520/STP34918S ↗
5. McEvily AJ, Beukelmann D, Tanaka K. On large scale plasticity effects in fatigue crack propagation. In: Proc symp mech behav mater, vol. 1, Kyoto, Japan, SMSJ; 1974. p. 269–81.
6. The development of fatigue crack propagation models for engineering applications at elevated temperatures10.1115/1.3443301 ↗
7. Mechanics of fatigue crack propagation by crack-tip plastic blunting10.1016/0013-7944(84)90163-2 ↗
8. Yielding of steel sheets containing slits10.1016/0022-5096(60)90013-2 ↗
9. The consequences of short crack closure on fatigue crack growth under variable amplitude loading10.1111/j.1460-2695.1991.tb00654.x ↗
10. Dill HD, Saff CR. Spectrum crack growth prediction method based on crack surface displacement and contact analysis. In: Fatigue crack growth under spectrum loads, ASTM STP 595; 1976. p. 306–19.10.1520/STP33381S ↗
11. Führing H, Seeger T. Fatigue crack growth under variable amplitude loading. In: Larson LH, editor, Sub-critical crack growth due to fatigue, stress corrosion and creep; 1984. p. 109–33.
12. Newman Jr JC. A crack closure model for predicting fatigue crack growth under aircraft spectrum loading. In: ASTM STP 748; 1981. p. 53–84.10.1520/STP28334S ↗
13. Strip yield model application for thermal cyclic loading10.1016/j.commatsci.2012.05.017 ↗
14. Dowling NE, Begley JA. Fatigue crack growth during gross plasticity and the J-integral. In: ASTM STP 590; 1976. p. 82–103.10.1520/STP33940S ↗
15. Dowling NE. Geometry effects and the J-integral approach to elastic–plastic fatigue crack growth. In: ASTM STP 601; 1977. p. 19–32.10.1520/STP28635S ↗
16. The extension of the J-integral concept to fatigue cracks10.1007/BF01141264 ↗
17. An interpretation of the ΔJ for cyclically unsaturated materials10.1007/BF00013505 ↗
18. Path independent integrals to predict onset of crack instability in an elastic–plastic material10.1007/BF00186134 ↗
19. On the path independent integral J10.1016/0013-7944(80)90015-6 ↗
20. Incremental path-independent integrals in inelastic and dynamic fracture10.1016/0013-7944(84)90129-2 ↗
21. Bauerbach K, Rudolph J, Vormwald M. Finite element simulation of short crack behavior under thermo-mechanical loading conditions. Transactions, SMiRT-22; 2013.
22. Fatigue crack growth and closure at high cyclic strains10.1016/0025-5416(87)90544-1 ↗
23. Rie KT, Schubert R. Note on the crack closure phenomenon in low-cycle fatigue. In: Proc 2nd int conf low cycle fatigue elastic–plastic behav mater; 1987. p. 575–80.10.1007/978-94-009-3459-7_89 ↗
24. McClung RC, Sehitoglu H. Closure behavior of small cracks under high strain fatigue histories. In: ASTM STP 982; 1988. p. 279–99.10.1520/STP27216S ↗
25. Characterization of fatigue crack growth in intermediate and large scale yielding10.1115/1.2903373 ↗
26. Vormwald M, Heuler P, Seeger T. A fracture mechanics based model for cumulative damage assessment as part of fatigue life prediction. In: ASTM STP 1122; 1992. p. 28–43.10.1520/STP24151S ↗
27. The effective stress range as a mean stress parameter10.1016/0142-1123(92)90153-4 ↗
28. Modeling crack closure and damage in variable amplitude fatigue using smooth specimen fatigue test data10.1016/j.ijfatigue.2010.08.010 ↗
29. A model of crack opening stresses in variable amplitude loading using smooth specimen fatigue test data for three steels10.1016/j.ijfatigue.2011.04.011 ↗
30. On the mechanism of fatigue crack propagation in ductile metallic materials10.1111/j.1460-2695.2010.01484.x ↗
31. A crack opening stress equation for fatigue crack growth10.1007/BF00020751 ↗
32. Thumser R, Kleemann S, Diemar A, Gerth U, Kleemann A, Pan Y, Beier HT, Kaffenberger M, Rossetti A, Schlitzer T, Zerres P, Bergmann JW, Vormwald M. Betriebsfestigkeit von Hochdruckbauteilen mit kleinen Schwingspielen großer Häufigkeit. Report 1000. Forschungsvereinigung Verbrennungskraftmaschinen e. V. (FVV), Frankfurt am Main, Germany; 2012 [in German].
33. A 3D numerical study of ductile tearing and fatigue crack growth under nominal cyclic plasticity10.1016/S0020-7683(96)00137-0 ↗
34. On numerical analysis of damage evolution in cyclic-plastic crack growth problems
35. Physically appropriate characterization of fatigue crack propagation rate in elastic–plastic materials using the J-integral concept
36. A new basis for the application of the J-integral for cyclically loaded cracks in elastic–plastic materials10.1007/s10704-014-9963-3 ↗
37. Dowling NE. Crack growth during low-cycle fatigue of smooth axial specimens. In: ASTM STP 637; 1977. p. 97–121.10.1520/STP27990S ↗
38. J-integral estimates for cracks in infinite bodies10.1016/0013-7944(87)90016-6 ↗
39. Fatigue life of constructional steel at complex loading as shown by at the material S46010.3139/120.110205 ↗
40. Hinkelmann K. Korrekturfunktionen zur Verbesserung der rechnerischen Lebensdauerabschätzung bei schwingender Beanspruchung. PhD-Thesis. Technische Universität Clausthal; 2012 [in German].
41. Vormwald M, Heuler P, Krae C. Spectrum fatigue life assessment of notched specimens using a fracture mechanics based approach. In: ASTM STP 1231; 1994. p. 221–40.10.1520/STP13951S ↗
42. Brown MW, Miller KJ. Mode I fatigue crack growth under biaxial stress at room and elevated temperature. In: ASTM STP 853; 1985. p. 135–52.10.1520/STP36221S ↗
43. Mixed mode small crack growth10.1111/j.1460-2695.1987.tb01145.x ↗
44. Socie DF, Furmann S. Fatigue damage simulation models for multiaxial loading. In: Proc 6th int fatigue conf; 1996. p. 967–76.10.1016/B978-008042268-8/50038-1 ↗
45. A critical plane approach to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
46. Reddy SC, Fatemi A. Small crack growth in multiaxial fatigue. In: ASTM STP 1122; 1992. p. 276–98.10.1520/STP24164S ↗
47. Stress ratio effect of fatigue crack propagation in biaxial stress field10.1111/j.1460-2695.1981.tb01132.x ↗
48. Mechanics of mixed mode small fatigue crack growth10.1016/0013-7944(87)90033-6 ↗
49. Crack nucleation and growth modeling in biaxial fatigue10.1016/0013-7944(88)90018-5 ↗
50. Closure and growth of mode I cracks in biaxial fatigue10.1111/j.1460-2695.1989.tb00552.x ↗
51. A ΔJ-based approach to biaxial fatigue10.1111/j.1460-2695.1992.tb00053.x ↗
52. Microcrack growth law for multiaxial fatigue10.1111/j.1460-2695.1996.tb01019.x ↗
53. Savaidis G, Seeger T. A short crack growth prediction model for multiaxial proportional elasto-plastic loading. In: Proc 6th int fatigue congr, vol. 2; 1996. p. 1001–6.10.1016/B978-008042268-8/50043-5 ↗
54. Consideration of multiaxiality in fatigue life prediction using the closure concept10.1111/j.1460-2695.1997.tb01542.x ↗
55. Crack opening displacement approach to assess multiaxial low cycle fatigue10.1016/j.ijfatigue.2007.04.014 ↗
56. Short fatigue crack growth under non-proportional multiaxial elastic–plastic strains10.1016/j.ijfatigue.2005.08.012 ↗
57. Deformations and damage to metallic materials under multiaxial non-proportional loading10.1016/j.commatsci.2009.01.022 ↗
58. Short-crack-growth-based fatigue assessment of notched components under multiaxial variable amplitude loading10.1016/j.engfracmech.2011.01.016 ↗
59. Multiaxial fatigue assessment based on a short crack growth concept10.1016/j.tafmec.2014.06.010 ↗
60. Hertel O, Döring R, Vormwald M. Cyclic J-integral under nonproportional loading. In: Proc 7th int conf biaxial/multiaxial fatigue fract; 2004. p. 513–8.