Fatigue life estimation for 2017A-T4 and 6082-T6 aluminium alloys subjected to bending-torsion with mean stress
Source abstract
Abstract
Abstract This paper proposes a model for estimating fatigue life under multiaxial stress states, based on critical plane concepts, taking into account the effect of mean shear stress. The fatigue life test results, calculated on the basis of the proposed model, are compared to the experimental ones related to 2017A-T4 and 6082-T6 aluminium alloy specimens under constant-amplitude bending, torsion and proportional combinations of bending and torsion. For the results obtained a statistical analysis is performed by comparing the calculation results with experimental data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Material Properties and Failure Mechanisms · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Wang C, Shang D-G, Wang XW, Chen H, Liu JZ. Comparison of HCF life prediction methods based on different critical planes under multiaxial variable amplitude loading. Fatigue Fract Eng Mater Struct. http://dx.doi.org/10.1111/ffe.12234 [in press].10.1111/ffe.12234 ↗
2. Structural integrity assessment of metallic components under multiaxial fatigue: the C–S criterion and its evolution10.1111/ffe.12037 ↗
3. A new path-dependent multiaxial fatigue model for metals under different paths10.1111/ffe.12106 ↗
4. Marangon C, Lazzarin P, Berto F, Campagnolo A. Some analytical remarks on the influence of phase angle on stress fields ahead of sharp V-notches under tension and torsion loads. Theor Appl Fract Mech. http://dx.doi.org/10.1016/j.tafmec.2014.06.015 [in press].10.1016/j.tafmec.2014.06.015 ↗
5. Fatigue life of metallic material estimated according to selected models and load conditions
6. Plastic strains and the macroscopic critical plane orientations under combined bending and torsion with constant and variable amplitudes10.1016/j.engfracmech.2006.02.005 ↗
7. Selection of the critical plane orientation in two-parameter multiaxial fatigue failure criterion under combined bending and torsion10.1016/j.engfracmech.2007.01.021 ↗
8. A survey on evaluating the fatigue limit under multiaxial loading10.1016/j.ijfatigue.2010.08.001 ↗
9. Multiaxial assessment using a simplified critical plane-based criterion10.1016/j.ijfatigue.2011.01.004 ↗
10. On the evolution and comparison of multiaxial fatigue criteria
11. Socie DF, Marquis GB. Multiaxial fatigue. In: SAE International; 2000.10.4271/R-234 ↗
12. Ellyin · 1996
13. A theory for the effect of mean stress on fatigue of metals under combined torsion and axial load or bending10.1115/1.4008327 ↗
14. An explanation on fatigue limit under combined stress10.1299/jsme1958.20.257 ↗
15. A critical plane approach to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
16. A shear-stress based critical-plane criterion of multiaxial fatigue failure for design and life estimation10.1111/j.1460-2695.1994.tb00789.x ↗
17. A critical plane approach for life estimation of high cycle fatigue under multiaxial variable amplitude loading10.1016/S0142-1123(99)00118-8 ↗
18. Invariant formulation of a gradient dependent multiaxial high-cycle fatigue criterion10.1016/S0013-7944(96)00047-1 ↗
19. A comparative study of multiaxial high-cycle fatigue criteria for metals10.1016/S0142-1123(96)00064-3 ↗
20. Long life fatigue under multiaxial loading10.1016/S0142-1123(01)00059-7 ↗
21. Macro-micro approach in high-cycle multiaxial fatigue
22. Application of the Dang-Van criterion for life determination under uniaxial random tension–compression with different mean values10.1111/j.1460-2695.2004.00778.x ↗
23. Reformulation in the frequency domain of a critical plane-based multiaxial fatigue criterion10.1016/j.ijfatigue.2014.01.008 ↗
24. An alternative definition of the shear stress amplitude based on the maximum rectangular Hull method and application to the C–S (Carpinteri–Spagnoli) criterion10.1111/ffe.12180 ↗
25. Behaviour of metals under complex static and alternating stresses
26. Smith · 1939
27. Smith · 1942
28. Krgo A, Kallmeyer AR, Kurath P. Evaluation of HCF multiaxial fatigue life prediction methodologies for Ti–6Al–4V. In: Proceedings of the 5th national turbine engine high cycle fatigue conference. Arizona; 2000.
29. Kallmeyer AR, Krgo A, Kurath P. Multiaxial fatigue life prediction methods for notched bars of Ti–6Al–4V. In: Proceedings of the 6th national turbine engine high cycle fatigue conference. Jacksonville, FL; 2001.10.1115/1.1446075 ↗
30. Fatigue life of aluminium alloy 2017(A) under proportional constant amplitude bending with torsion in energy approach
31. New energy model for fatigue life determination under multiaxial loading with different mean values10.1016/j.ijfatigue.2014.04.008 ↗
32. Criteria of multiaxial random fatigue based on stress, strain and energy parameters of damage in the critical plane10.1002/mawe.200500898 ↗
33. Critical planes in multiaxial fatigue10.4028/www.scientific.net/MSF.482.109 ↗
34. Analysis of the coefficient of normal stress effect in chosen multiaxial fatigue criteria10.1016/j.tafmec.2014.07.015 ↗
35. Pawliczek · 2000
36. Multiaxial fatigue damage models. Transactions of the ASME10.1115/1.3225980 ↗
37. Manual of codes of practice for the determination of uncertainties in mechanical tests on metallic materials. In: Standards measurement & testing programme; 2000. ISBN 0-946754-41-1.
38. The development of confidence limits for fatigue strength data
39. The multiaxial random fatigue criteria based on strain and energy damage parameters on the critical plane for the low-cycle range10.1016/j.ijfatigue.2011.09.013 ↗
40. Multiaxial fatigue endurance of 30NCD16 steel10.1016/0142-1123(89)90436-2 ↗