The effects of inhomogeneous microstructure and loading waveform on creep-fatigue behaviour in a forged and precipitation hardened nickel-based superalloy
Source abstract
Abstract
Abstract The aim of the present paper is to identify the effects of sampling locations and loading waveforms on high-temperature low-cycle fatigue (HTLCF) and creep-fatigue life of a forged and precipitation hardened nickel-based GH4169 superalloy. Both the deformation and failure mechanisms are considered here. It has been revealed that HTLCF and creep-fatigue life of specimens were influenced by inhomogeneous microstructures at different locations. Compared with the HTLCF tests, the presence of dwell times in creep-fatigue tests tended to reduce number of cycles to failure. Intergranular damage was observed at both crack initiation and propagation stages. For the dwell times under tension, the intergranular damage was mainly associated with precipitate-assist voids. However, oxidation accounted for the presence of intergranular damage for the dwell times under compression.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Grain size effect on the small fatigue crack initiation and growth mechanisms of nickel-based superalloy GH416910.1016/j.engfracmech.2015.01.002 ↗
2. Aging effects on the microstructure and creep behavior of Inconel 718 superalloy10.1016/j.msea.2008.04.097 ↗
3. Crack growth micro-mechanisms in the IN718 alloy under the combined influence of fatigue, creep and oxidation10.1016/j.ijfatigue.2009.01.023 ↗
4. Investigation and modeling of low cycle fatigue behaviors of two Ni-based superalloys under dwell conditions10.1016/j.ijpvp.2009.04.002 ↗
5. High temperature fatigue: creep–fatigue–oxidation interactions in relation to microstructure
6. Nucleation and growth of cracks and cavities under creep-fatigue interaction10.1016/0079-6425(93)90006-7 ↗
7. High temperature fatigue of nickel-base superalloys – a review with special emphasis on deformation modes and oxidation10.1016/j.engfailanal.2009.01.010 ↗
8. Manson · 2009
9. A unified criterion for fatigue–creep life prediction of high temperature components
10. The linear-elastic theory of critical distances to estimate high-cycle fatigue strength of notched metallic materials at elevated temperatures10.1111/ffe.12273 ↗
11. Influence of surface roughness on high temperature fatigue strength and cracks initiation in 40CrMoV13. 9 notched components10.1016/j.tafmec.2015.07.003 ↗
12. Extension of linear elastic strain energy density approach to high temperature fatigue and a synthesis of Cu-Be alloy experimental tests10.5267/j.esm.2015.1.004 ↗
13. Intergranular crack tip oxidation mechanism in a nickel-based superalloy10.1016/0921-5093(92)90358-8 ↗
14. Elevated temperature fatigue crack growth in alloy 718—Part II: Effects of environmental and material variables10.1111/j.1460-2695.1993.tb00103.x ↗
15. R5 procedures for assessing structural integrity of components under creep and creep–fatigue conditions10.1179/174328006X79463 ↗
16. Strain fatigue and tensile behavior of Inconel® 718 from room temperature to 650°C10.1520/JTE10109J ↗
17. High-temperature time-dependent fatigue behaviour of several engineering structural alloys10.1179/imr.1985.30.1.235 ↗
18. Effect of temperature and strain amplitude on dislocation structure of M963 superalloy during high-temperature low cycle fatigue10.2320/matertrans.47.67 ↗
19. Simultaneous creep–fatigue damage accumulation of forged turbine disc of IN 718 superalloy10.1016/j.msea.2013.02.003 ↗
20. Mechanical properties anisotropy of isothermally forged and precipitation hardened Inconel 718 disk10.1007/s11661-014-2706-2 ↗
21. Fatigue behavior and bilinear Coffin-Manson plots of Ni-based GH4169 alloy with different volume fractions of δ phase10.1016/j.msea.2016.11.040 ↗
22. Effect of boron on the low-cycle fatigue behavior and deformation structure of INCONEL 718 at 650°C10.1007/s11661-004-0185-6 ↗
23. ASME E 2714–13. Standard test method for creep-fatigue testing. American Society of Testing and Materials; 2013.
24. ASTM E-112. Standard test methods for determining average grain size. ASTM International USA; 2010.
25. Effect of different processing technologies and heat treatments on the microstructure and creep behavior of GH4169 superalloy10.1016/j.msea.2013.06.021 ↗
26. High resolution electron back-scatter diffraction analysis of thermally and mechanically induced strains near carbide inclusions in a superalloy10.1016/j.actamat.2010.09.030 ↗
27. The structure of high-angle grain boundaries10.1016/0001-6160(66)90168-4 ↗
28. Structure-dependent intergranular oxidation in Ni–Fe polycrystalline alloy10.1016/S1359-6454(99)00007-5 ↗
29. Formation of annealing twins in fcc crystals10.1016/S1359-6454(96)00336-9 ↗
30. Study of annealing twins in FCC metals and alloys10.1007/BF02647209 ↗
31. Trimby P. Analysis of the crystallographic signature of electron beam welds in Cu: implications for variations in etching characteristics: Svensk kärnbränslehantering (SKB); 2009.
32. Engineering science aspects of the Hall-Petch relation10.1007/s00707-013-1048-2 ↗
33. Microstructural evolution and its effect on Hall-Petch relationship in friction stir welding of thixomolded Mg alloy AZ91D10.1023/A:1026351619636 ↗
34. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗
35. Dynamic embrittlement—time–dependent quasi–brittle intergranular fracture at high temperatures10.1179/174328005X14320 ↗
36. Observations of the effect of creep relaxation on high-strain fatigue10.1243/JMES_JOUR_1966_008_040_02 ↗
37. A combined deformation map-ductility exhaustion approach to creep-fatigue analysis10.1016/0025-5416(81)90128-2 ↗
38. Low cycle fatigue behavior of inconel 718 at 298K and 823K10.1007/BF02667395 ↗
39. Twinning-related grain boundary engineering10.1016/j.actamat.2004.05.031 ↗
40. Dependence of creep fracture of Inconel 718 on grain boundary precipitates10.1016/S1359-6454(96)00399-0 ↗
41. High temperature behavior of Ni-base weld metal10.1016/j.msea.2004.03.075 ↗
42. Creep-fatigue interactions (crack initiation)10.1016/B0-08-043749-4/05112-0 ↗
43. Study on creep-fatigue evaluation procedures for high-chromium steels—Part I: Test results and life prediction based on measured stress relaxation10.1016/j.ijpvp.2007.11.008 ↗
44. Creep-fatigue-oxidation interactions in a 9Cr–1Mo martensitic steel. Part II: Effect of compressive holding period on fatigue lifetime10.1016/j.ijfatigue.2007.05.008 ↗
45. Creep–fatigue–oxidation interactions in a 9Cr–1Mo martensitic steel. Part III: Lifetime prediction10.1016/j.ijfatigue.2008.02.006 ↗
46. Improving resistance to dynamic embrittlement and intergranular oxidation of nickel based superalloys by grain boundary engineering type processing10.1179/174328405X63935 ↗