Fatigue fracture properties of magnetic pulse welded dissimilar Al-Fe lap joints
Source abstract
Abstract
Abstract In this study, AA5052 aluminum alloy was welded to high strength low alloy steel HC420LA by magnetic pulse welding. The joint showed higher strength than the base metal and the shear strength exceeded 100 MPa. The weld area increase 36% when the discharge energy rose from 25 kJ to 40 kJ. The weld usually showed better fatigue resistance than the base metal under low stress amplitude (Sa ≤ 20 MPa), while interfacial failure would occur under high stress amplitude (Sa ≥ 26.7 MPa). Meanwhile, brittle fracture and ductile fracture were coexisted in the interfacial fracture surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Dissimilar FSW of immiscible materials: Steel/magnesium10.1016/j.msea.2014.11.060 ↗
2. Study of the fatigue behaviour of dissimilar aluminium joints produced by friction stir welding10.1016/j.ijfatigue.2015.06.020 ↗
3. Effect of specimen configuration on fatigue properties of dissimilar aluminum to steel resistance spot welds10.1016/j.ijfatigue.2018.06.009 ↗
4. Magnetic pulse welding: an efficient and environmentally friendly multi-material joining technique10.1016/j.jclepro.2015.03.042 ↗
5. Electromagnetic forming-A review10.1016/j.jmatprotec.2010.12.012 ↗
6. Application of high velocity impact welding at varied different length scales10.1016/j.jmatprotec.2010.01.001 ↗
7. Electromagnetic impact welding of aluminum to stainless steel sheets10.1016/j.jmatprotec.2008.01.039 ↗
8. Interfacial microstructure and strength of steel/aluminum alloy lap joint fabricated by magnetic pressure seam welding10.1016/j.msea.2007.04.033 ↗
9. Magnetic pulse spot welding of bimetals10.1016/j.jmatprotec.2014.01.007 ↗
10. Magnetic pulse welding: Interface of Al/Cu joint and investigation of intermetallic formation effect on the weld features10.1016/j.jmapro.2014.05.002 ↗
11. Interface characteristics and performance of magnetic pulse welded copper-Steel tubes10.1016/j.jmatprotec.2017.03.001 ↗
12. Microstructure, tensile and fatigue properties of ultrasonic spot welded aluminum to galvanized high-strength-low-alloy and low-carbon steel sheets10.1016/j.msea.2017.03.023 ↗
13. Fatigue and fracture of friction stir linear welded dissimilar aluminum-to-magnesium alloys10.1016/j.ijfatigue.2015.09.033 ↗
14. Interface phenomena in aluminium–magnesium magnetic pulse welding10.1179/174329308X300136 ↗
15. In situ metallic porous structure formation due to ultra high heating and cooling rates during an electromagnetic pulse welding10.1016/j.scriptamat.2016.09.030 ↗
16. Magnetic pulse welding of Al/Al and Al/Cu metal pairs: Consequences of the dissimilar combination on the interfacial behavior during the welding process
17. Recent developments in explosive welding10.1016/j.matdes.2010.10.017 ↗
18. Weibull statistical analysis of Krouse type bending fatigue of nuclear materials10.1016/j.jnucmat.2015.12.016 ↗
19. Fatigue life assessment of friction spot welded 7050-T76 aluminium alloy using Weibull distribution10.1016/j.ijfatigue.2016.02.030 ↗
20. Microstructures and mechanical properties of the welded AA5182/HC340LA joint by magnetic pulse welding10.1016/j.matchar.2018.02.018 ↗
21. Numerical and experimental studies of the mechanism of the wavy interface formations in explosive/impact welding10.1016/j.jmps.2005.06.001 ↗
22. Depiction of interfacial morphology in impact welded Ti/Cu bimetallic systems using smoothed particle hydrodynamics10.1063/1.4984742 ↗
23. High cooling rates and metastable phases at the interfaces of explosively welded materials10.1016/j.actamat.2017.06.038 ↗
24. Specific wave interface and its formation during magnetic pulse welding10.1063/1.4903044 ↗
25. Strain rate sensitivity of Al-Fe magnetic pulse welds10.1016/j.jmatprotec.2018.06.021 ↗
26. Fatigue life assessment of electromagnetic riveted carbon fiber reinforce plastic/aluminum alloy lap joints using Weibull distribution10.1016/j.ijfatigue.2017.08.026 ↗