The effect of the residual stresses generated by surface finishing methods on the very high cycle fatigue behavior of matrix HSS
Source abstract
Abstract
Abstract To investigate the fatigue properties of matrix high-speed tool steel (0.7C–0.1W–3Mo–2V) under very high cycle fatigue regimes, cantilever-type rotating bending fatigue tests were carried out on hour-glass shaped specimens in an air atmosphere at room temperature. The specimen surfaces were finished by grinding and cutting processes which give different surface compressive residual stresses. Both specimen treatments showed a clear duplex S–N curve, composed of three types of failure mode depending on the stress amplitude. A map of the appearance of failure modes relating stress amplitude to residual stress was proposed. The dependence of the S–N curve on a critical size of inclusion at the crack origin was demonstrated by the estimation of crack growth rate from the S–N data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Surface Treatment and Residual Stress · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Fatigue strength of various surface hardened steels
2. Superlong life tension–compression fatigue properties of quenched and tempered 0.46% carbon steel10.1016/S0142-1123(98)00028-0 ↗
3. The fatigue limit and its elimination10.1046/j.1460-2695.1999.00204.x ↗
4. There is no infinite fatigue life in metallic materials10.1046/j.1460-2695.1999.00183.x ↗
5. Experimental reconfirmation of characteristic S–N property for high carbon–chromium bearing steel in wide life region in rotating bending10.2472/jsms.49.779 ↗
6. S–N curve characteristics and subsurface crack initiation behavior in ultra-long life fatigue of a high carbon–chromium bearing steel10.1046/j.1460-2695.2001.00459.x ↗
7. S–N property and fractography of high carbon chromium bearing steel over ultra wide life region under rotating bending10.1299/kikaia.67.1805 ↗
8. High-cycle rotating bending fatigue property in very long-life regime of high-strength steels10.1046/j.1460-2695.2002.00575.x ↗
9. Fatigue crack propagation behavior derived from S–N data in very high cycle regime10.1046/j.1460-2695.2002.00547.x ↗
10. Effect of two-step load variation on super-long life fatigue and internal crack growth behavior of high carbon–chromium bearing steel10.1299/kikaia.68.1666 ↗
11. Effect of humidity on crack initiation mechanism and associated S–N characteristics in very high strength steels10.1016/S0921-5093(02)00460-4 ↗
12. Internal fatigue failure mechanism of high strength steels in gigacycle regime10.4028/www.scientific.net/KEM.378-379.65 ↗
13. Experimental estimation of fatigue initiation lives and fatigue limit in subsurface fracture of a high carbon–chromium steel10.1016/j.ijfatigue.2005.05.017 ↗
14. Mechanism of fatigue failure in ultralong life regime10.1046/j.1460-2695.2002.00576.x ↗
15. Notch effect on fatigue strength reduction of bearing steel in very high cycle regime10.1016/j.ijfatigue.2005.04.017 ↗
16. Characteristic S–N properties of high carbon–chromium bearing steel under axial loading in long life fatigue10.1046/j.1460-2695.2002.00574.x ↗
17. Effect of stress ratio on long life fatigue behavior of high carbon chromium bearing steel under axial loading10.1016/j.ijfatigue.2005.04.018 ↗
18. Effect of non-metallic inclusion size and residual stresses on gigacycle fatigue properties in high strength steel10.4028/www.scientific.net/AMR.44-46.33 ↗
19. Very high cycle fatigue properties of bearing steel under axial loading condition10.1016/j.ijfatigue.2008.11.001 ↗
20. Ultrasonic fatigue tests on bearing steel AISI-SAE 52100 at frequency of 20 and 30kHz10.1016/S0142-1123(03)00161-0 ↗
21. Very long life fatigue behavior of bearing steel AISI 52100
22. Gigacycle fatigue properties of high strength steels according to inclusion and ODA sizes
23. 1010-cycle fatigue properties of MPa-class JIS SUP7 spring steel10.1046/j.1460-2695.2003.00661.x ↗
24. Influence of inclusion size on fatigue behavior of high strength steels in the gigacycle fatigue regime10.1016/j.ijfatigue.2006.06.004 ↗
25. Very high cycle fatigue properties of bainitic high carbon–chromium steel10.1016/j.ijfatigue.2008.09.001 ↗
26. Effect of tempering temperature on very high cycle fatigue behavior in low-alloy steel, SNCM43910.2472/jsms.57.905 ↗
27. Axial loading fatigue properties of low alloy steel, SNCM439, in very high cycle regime10.1299/kikaia.74.885 ↗
28. Gigacycle fatigue properties for high strength low alloy steel at 100Hz, 600Hz and 20kHz10.1016/S1359-6462(01)01213-1 ↗
29. Gigacycle fatigue behavior and fracture morphology of high speed tool steel, JIS SKH 5110.1299/kikaia.69.662 ↗
30. Effect of stress ratio on subsurface fatigue fracture of high-speed tool steel, SKH5110.1299/kikaia.72.1153 ↗
31. Effect of surface treatment on super-long-life fatigue behavior in high speed tool steel, JIS SKH5110.1299/kikaia.69.1195 ↗
32. Subsurface crack initiation and propagation mechanism in high-strength steel in a very high cycle fatigue regime10.1016/j.ijfatigue.2005.08.015 ↗
33. Subsurface crack initiation and propagation mechanism under the super-long fatigue regime for high speed tool steel (JIS SKH51) by fracture surface topographic analysis10.1299/jsmea.49.1 ↗
34. On the mechanism of fatigue failure in the superlong life regime (>107 cycles). Part I: influence of hydrogen trapped by inclusions10.1046/j.1460-2695.2000.00328.x ↗
35. On the mechanism of fatigue failure in the superlong life regime (>107 cycles). Part II: a fractographic investigation10.1046/j.1460-2695.2000.00343.x ↗
36. Review and prospects for current studies on very high cycle fatigue of metallic materials for machine structural use
37. On the life-controlling microstructural fatigue mechanisms in ductile metals and alloys in the gigacycle regime10.1046/j.1460-2695.1999.00186.x ↗
38. Specific features and mechanisms of fatigue in the ultrahigh-cycle regime10.1016/j.ijfatigue.2005.05.018 ↗
39. The relationship of effective stress elastic modulus and Burgers-vector on fatigue crack growth as associated with “fish eye” gigacycle fatigue phenomena
40. Fatigue crack growth from small to long cracks in VHCF with surface initiations10.1016/j.ijfatigue.2007.03.015 ↗
41. Study of thermal effects associated with crack propagation during very high cycle fatigue tests10.1016/j.actamat.2008.04.023 ↗
42. Transition of fatigue failure mode of Ni–Cr–Mo low-alloy steel in very high cycle regime10.1016/j.ijfatigue.2009.06.011 ↗
43. Influence of inclusion size on S–N curve characteristics og high-strength steels in the giga-cycle fatigue regime10.1111/j.1460-2695.2009.01370.x ↗
44. Very high-cycle fatigue behavior of shot-peened high carbon–chromium bearing steel10.1046/j.1460-2695.2002.00567.x ↗
45. Experimental evidence of duplex S–N characteristics in wide life region for high strength steels
46. Effects of defects, inclusions and inhomogeneities on fatigue strength10.1016/0142-1123(94)90001-9 ↗
47. Factors influencing the mechanism of superlong fatigue failure in steels10.1046/j.1460-2695.1999.00187.x ↗