Determination of the fatigue critical distance according to the Line and the Point Methods with rounded V-notched specimen
Source abstract
Abstract
Abstract The critical distance length should in principle be deduced from the plain specimen fatigue limit and the threshold stress intensity factor range. However, the threshold range is difficult to measure experimentally, hence this length is usually obtained by means of a notched specimen. The critical distance inverse search, both according to the Line and the Point Methods, is presented in this paper referring to a relatively sharp V-notched specimen. Precise indications about the geometry parameters are given along with a complete analytical procedure to easily obtain the critical distance. A sensitivity analysis is discussed, providing evidence of a critical distance range for a well-posed inversion problem.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Non-Destructive Testing Techniques · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Taylor · 2007
2. The theory of critical distances10.1016/j.engfracmech.2007.04.007 ↗
3. The validation of some methods of notch fatigue analysis10.1046/j.1460-2695.2000.00302.x ↗
4. A multiaxial high-cycle fatigue life evaluation model for notched structural components10.1016/j.ijfatigue.2015.07.010 ↗
5. A unifying approach to estimate the high-cycle fatigue strength of notched components subjected to both uniaxial and multiaxial cyclic loadings10.1111/j.1460-2695.2004.00759.x ↗
6. Fretting fatigue of aluminum alloy in contact with steel in oil drill pipe connections, modeling to interpret test results10.1016/j.ijfatigue.2007.05.006 ↗
7. Fretting fatigue tests on shrink-fit specimens and investigations into the strength enhancement induced by deep rolling10.1016/j.ijfatigue.2015.08.007 ↗
8. On the design and test of equivalent configurations for notch and fretting fatigue10.1111/ffe.12435 ↗
9. A multiaxial stress-based critical distance methodology to estimate fretting fatigue life10.1016/j.triboint.2016.07.028 ↗
10. Early cracking orientation under high stress gradients: the fretting case10.1016/j.ijfatigue.2016.12.013 ↗
11. Fretting high-cycle fatigue assessment through a multiaxial critical plane-based criterion in conjunction with the Taylor’s Point Method10.4028/www.scientific.net/SSP.258.217 ↗
12. A stress gradient approach for fretting fatigue assessment of metallic structural components10.1016/j.ijfatigue.2017.04.004 ↗
13. Notch fatigue behaviour of shot peened high-strength aluminium alloys: experiments and predictions using a critical distance method10.1016/j.ijfatigue.2010.02.012 ↗
14. On the combination of the critical distance theory with a multiaxial fatigue criterion for predicting the fatigue strength of notched and plain shot-peened parts10.1016/j.ijfatigue.2016.08.015 ↗
15. An implicit gradient application to fatigue of sharp notches and weldments10.1016/j.engfracmech.2006.06.009 ↗
16. Theory of Critical Distances versus Gradient Mechanics in modelling the transition from the short to long crack regime at the fatigue limit10.1111/ffe.12066 ↗
17. Gradient elasticity: a transformative stress analysis tool to design notched components against uniaxial/multiaxial high-cycle fatigue10.1111/ffe.12447 ↗
18. Gradient-enriched finite element methodology for axisymmetric problems10.1007/s00707-016-1762-7 ↗
19. Standard Test Method for Measurement of Fatigue Crack Growth Rates, ASTM E647 – 15; 2015. doi:https://doi.org/10.1520/E0647-15.10.1520/E0647-15 ↗
20. Assessing the integrity of steel structural components with stress raisers using the Theory of Critical Distances10.1016/j.engfailanal.2016.07.007 ↗
21. A novel reformulation of the Theory of Critical Distances to design notched metals against dynamic loading10.1016/j.matdes.2014.12.026 ↗
22. On the Point Method load-bearing capacity predictions in Al7075-T651 structural components containing stress risers10.1016/j.engfailanal.2012.07.008 ↗
23. The notch effect on fracture of polyurethane materials10.3221/IGF-ESIS.30.14 ↗
24. The Theory of Critical Distances as an alternative experimental strategy for the determination of KIc and ΔKth10.1016/j.engfracmech.2010.04.016 ↗
25. The theory of critical distances to estimate finite lifetime of notched components subjected to constant and variable amplitude torsional loading10.1016/j.engfracmech.2012.12.007 ↗
26. Applications of the theory of critical distances in failure analysis10.1016/j.engfailanal.2010.07.002 ↗
27. Crack initiation life in notched steel bars under torsional fatigue: synthesis based on the averaged strain energy density approach10.1016/j.ijfatigue.2016.12.022 ↗
28. Fatigue strength of severely notched specimens made of Ti-6Al-4V under multiaxial loading10.1111/ffe.12272 ↗
29. Stress singularities resulting from various boundary conditions in angular corners of plates in extension10.1115/1.4010553 ↗
30. A unified treatment of the mode I fatigue limit of components containing notches or defects10.1007/s10704-005-2183-0 ↗
31. Characteristics of the process zone at sharp notch roots10.1016/j.ijsolstr.2011.03.023 ↗
32. Pilkey · 2008
33. Brittle fracture assessment of engineering components in the presence of notches: a review10.1111/ffe.12379 ↗
34. On the second non-singular stress term of the V-notch solution: a new engineering solution10.1007/s10704-013-9822-7 ↗