Effect of weld reinforcement on tensile and fatigue properties of 5083 aluminum metal inert gas (MIG) welded joint: Experiments and numerical simulations
Source abstract
Abstract
Abstract The weld reinforcement has a strong impact on mechanical properties of MIG welded joints. This paper investigates the effect of weld reinforcement on tensile, high cycle fatigue and fatigue crack propagation properties of 5083 MIG welded joint through experimentation and numerical simulations. The results show that the existence of reinforcement significantly increases the tensile strength of the welded joint, even exceeding that of base material. But the weld reinforcement is detrimental to fatigue properties. Another significant discovery is that the weld reinforcement alters the mechanism of fatigue crack initiation and rupture relative to the smooth specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Effects of tensile test parameters on the mechanical properties of a bimodal Al–Mg alloy10.1016/j.actamat.2012.07.024 ↗
2. The influence of stabilization treatment on long-term corrosion resistance and microstructure in Er and Zr containing 5083 aluminum alloy10.1016/j.matchar.2020.110143 ↗
3. Fatigue crack propagation behavior of friction stir welded 5083–H32 and 6061–T651 aluminum alloys10.1016/j.msea.2007.06.008 ↗
4. Slow strain rate testing and stress corrosion cracking of ultra-fine grained and conventional Al–Mg alloy10.1016/j.msea.2014.09.062 ↗
5. Experimental investigation on the heterogeneous ratchetting of SUS301L stainless steel butt weld joint during uniaxial cyclic loading10.1016/j.ijfatigue.2017.08.027 ↗
6. Fatigue properties of friction stir welds in Al 5083 alloy10.1016/j.scriptamat.2005.07.016 ↗
7. Fatigue life improvement by friction stir processing of 5083 aluminium alloy MIG butt welds10.1016/j.tafmec.2014.02.002 ↗
8. Effect of repair welding on microstructure and mechanical properties of 7N01 aluminum alloy MIG welded joint10.1016/j.jmapro.2020.03.009 ↗
9. Formability behavior of Al/steel MIG arc brazed-fusion welded joint10.1016/j.jmatprotec.2019.116255 ↗
10. Microstructures and fatigue behavior of metal-inert-gas-welded joints for extruded Al-Mg-Si alloy10.1016/j.msea.2018.12.080 ↗
11. Uniaxial cyclic ratcheting and plastic flow properties of SS304 stainless steel at room and elevated temperatures10.1016/S0167-6636(01)00099-0 ↗
12. A low-cycle fatigue life-prediction model for SUS301L stainless steel butt-welded joint with considering ratchetting10.1016/j.ijfatigue.2020.105777 ↗
13. Review on fatigue life prediction models of welded joint10.1007/s10409-020-00957-0 ↗
14. Residual stress and strain in MIG butt welds in 5083–H321 aluminium: As-welded and fatigue cycled10.1016/j.ijfatigue.2008.04.010 ↗
15. A study on fatigue behavior of MIG-welded Al-Mg alloy with different filler-wire materials under mean stress10.1016/j.ijfatigue.2017.11.001 ↗
16. Physically short and long-crack growth behavior of MIG welded Al-5.8%Mg alloy10.1016/j.engfracmech.2019.01.026 ↗
17. Environmentally assisted fatigue behaviour of stress relieved metal inert gas (MIG) AA5083 welds in 3.5% NaCl solution10.1016/j.ijfatigue.2017.03.041 ↗
18. Mitigating distortion and residual stress by static thermal tensioning to improve fatigue crack growth performance of MIG AA5083 welds10.1016/j.matdes.2016.03.049 ↗
19. Effects of weld reinforcement on tensile behavior and mechanical properties of 2219–T87 aluminum alloy TIG welded joints10.1016/S1003-6326(17)60002-5 ↗
20. Gordon · 1992
21. Comparative fatigue assessment of soft toe and nested bracket welded aluminium structures10.1016/j.engfailanal.2004.12.005 ↗
22. Fatigue crack initiation and growth in AlMg4.5Mn butt weldments10.1046/j.1460-2695.2001.00372.x ↗
23. International Organization for Standardization. ISO 6892-1: 2016. Metallic materials—tensile testing—part 1; 2016.
24. International Organization for Standardization. ISO 4136: 2001. Destructive Tests on Welds in Metallic Materials—Transverse Tensile Test; 2001.
25. International Organization for Standardization. ISO 6507-1: 2005. Metallic Materials—Vickers Hardness Test; 2005.
26. International Organization for Standardization. ISO 1099 : 2006. Metallic Materials--Fatigue Testing--Axial Force-controlled Method; 2006.
27. ASTM International ASTM International West Conshohocken P. E647-15e1, Standard Test Method for Measurement of Fatigue Crack Growth Rates; 2015.
28. High cycle fatigue behavior and numerical evaluation of Alloy 690TT steam generator tube10.1016/j.ijfatigue.2020.105662 ↗
29. A plain linear rule for fatigue analysis under natural loading considering the coupled fatigue and corrosion effect10.1016/j.ijfatigue.2019.01.008 ↗
30. Cumulative damage in fatigue10.1115/1.4009555 ↗
31. Fatigue crack initiation and propagation in re-entrant auxetic cellular structures10.1016/j.ijfatigue.2019.05.010 ↗
32. Relationship between pool characteristic and weld porosity in laser arc hybrid welding of AA6082 aluminum alloy10.1016/j.jmatprotec.2016.10.001 ↗
33. Microstructure and porosity characteristics of 5A06 aluminum alloy joints using laser-MIG hybrid welding10.1016/j.jmapro.2018.08.011 ↗
34. Microstructure and mechanical properties of as-reflowed Sn58Bi composite solder pastes10.1016/j.jmatprotec.2016.07.040 ↗
35. Numerical simulation of columnar dendritic grain growth during weld solidification process10.1179/174329307X164427 ↗
36. Modeling dendritic structure and mechanical properties of Zn-Al alloys as a function of solidification conditions10.1016/S0921-5093(01)01455-1 ↗
37. Influence of Ti, B and Sr on the microstructure and mechanical properties of A356 alloy10.1007/s10853-010-4977-3 ↗
38. Investigation of high-cycle fatigue and fatigue crack propagation characteristic in 5083-O aluminum alloy10.1016/j.ijfatigue.2019.05.020 ↗
39. Investigation of pre-existing particles in Al 5083 alloys10.1016/j.jallcom.2017.12.329 ↗
40. The effect of friction stir processing on 5083–H321/5356 Al arc welds: microstructural and mechanical analysis10.1007/s11661-006-1055-1 ↗
41. Improved solution treatment for an as-rolled Al-Zn-Mg-Cu alloy. Part II. Microstructure and mechanical properties10.1016/j.msea.2011.11.073 ↗
42. Influence of vacancy formation and Mg migration on cracking in spot welding AA5754 alloys10.4028/www.scientific.net/MSF.539-543.433 ↗
43. Mechanical properties of engineering materials
44. A state-of-the-art review on fatigue life assessment of steel bridges10.1155/2014/956473 ↗
45. Strength of ring-stiffened tubular T-joints in offshore structures—: a numerical parametric study10.1016/S0143-974X(99)00027-9 ↗
46. Composites: Part B Investigating the use of compliant webs in the damage-tolerant design of stiffener run-outs10.1016/j.compositesb.2012.08.007 ↗
47. Effect of load redistribution in transient plastic flow10.1007/BF02586130 ↗
48. Internal stress relaxation and load redistribution during the twinning–detwinning-dominated cyclic deformation of a wrought magnesium alloy, ZK60A10.1016/j.actamat.2008.04.006 ↗
49. Quantitative assessment of superplastic deformation behavior in a commercial 5083 alloy10.1016/S0921-5093(98)00678-9 ↗
50. Inter-granular cracking through strain gradient crystal plasticity and cohesive zone modeling approaches10.1016/j.tafmec.2019.102306 ↗
51. Constraint-induced crack initiation at electrode edges in piezoelectric ceramics10.1016/S1359-6454(01)00169-0 ↗
52. Effect of hydrogen content in ER5183 welding wire on the tensile strength and fracture morphology of Al–Mg MIG weld10.1016/j.vacuum.2019.05.011 ↗
53. Materials Characterization Evaluation of microstructure stability at the interfaces of Al-6061 welds fabricated using ultrasonic additive manufacturing10.1016/j.matchar.2018.02.043 ↗
54. A model for the formation of fatigue striations and its relationship with small fatigue crack growth in an aluminum alloy10.1016/j.ijfatigue.2010.05.005 ↗
55. Rationalization of anisotropic mechanical properties of Al-6061 fabricated using ultrasonic additive manufacturing10.1016/j.actamat.2016.06.048 ↗
56. Rupture mechanisms in combined tension and shear—experiments10.1016/j.ijsolstr.2006.09.031 ↗
57. Fatigue life improvement of mig welded aluminium T-joints by friction stir processing10.1016/j.ijfatigue.2013.11.004 ↗