How proper similitude can improve our understanding of crack closure and plasticity in fatigue
Source abstract
Abstract
Abstract The appropriateness of some common similitude principles with respect to describing and predicting fatigue damage propagation is discussed. Linear elastic fracture mechanics have provided a basis to describe damage growth using stress intensity factors or strain energy release rates, both related to the work of Griffith and Irwin. The fatigue crack growth equations presented in the literature are discussed, and it is demonstrated that the principles of similarity in current methodologies have not yet been well established. As a consequence, corrections for the stress ratio effect are misunderstood. An alternative principle of similitude using cyclic work and strain energy release is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Numerical methods in engineering · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. A history of fatigue10.1016/0013-7944(95)00178-6 ↗
2. Metallic materials properties development and standardization (MMPDS) handbook. MMPDS-08. Battelle Memorial Institute; 2013.
3. Handbuch Struktur Berechnung (HSB). IASB; 1969.
4. Recommendations for fatigue design of welded joints and components. IIW document XIII-1965-03/XV-1127-03. International Institute of Welding (IIW); 2003.
5. Schijve J. Fatigue of structures and materials. 2nd ed. Springer Science+Business Media B.V; 2009.10.1007/978-1-4020-6808-9 ↗
6. The effects of environment and load frequency on the crack propagation law for macro fatigue crack growth in aluminium alloys10.1016/0013-7944(70)90003-2 ↗
7. A generalized Paris’ law for fatigue crack growth10.1016/j.jmps.2006.01.007 ↗
8. Similitude and the Paris crack growth law10.1016/j.ijfatigue.2008.01.016 ↗
9. Determination of Paris law constants with a reverse engineering technique10.1016/j.engfailanal.2008.02.004 ↗
10. The growth of fatigue cracks10.1080/14786440908521062 ↗
11. The propagation of fatigue cracks10.1115/1.4011345 ↗
12. The propagation of fatigue cracks in sheet specimens10.1016/0022-5096(58)90018-8 ↗
13. A critical analysis of crack propagation laws10.1115/1.3656900 ↗
14. McEvily AJ, Illg W. The rate of crack propagation in two aluminum alloys. NACA Technical Note 4394; 1958.
15. A rational analytic theory of fatigue
16. Analysis of stresses and strains near the end of a crack traversing a plate10.1115/1.4011547 ↗
17. Fracture mechanics analysis of fatigue crack growth data for various materials10.1016/0013-7944(71)90003-8 ↗
18. Crack propagation in thin metal sheet under repeated loading10.1115/1.3658886 ↗
19. Fatigue crack propagation and applied stress range – an energy approach10.1115/1.3656501 ↗
20. Donaldson DR, Anderson WE. Crack propagation behavior of some airframe materials. Proceedings of crack propagation symposium, vol. 2. Cranfield, England: College of Aeronautics; 1961. p. 375–441.
21. Numerical analysis of crack propagation in cyclic-loaded structures10.1115/1.3609637 ↗
22. Broek D, Schijve J. The influence of the mean stress on the propagation of fatigue cracks in aluminum alloy sheet. National Aero- Research Institute, Amsterdam, The Netherlands, Report NLR-TN M2.111; 1963.
23. Shear lips on fatigue fractures in aluminium alloy sheet material10.1016/0013-7944(81)90091-6 ↗
24. Effect of stress ratio on fatigue-crack growth in 7075-T6 aluminium-alloy sheet10.1016/0013-7944(69)90003-4 ↗
25. Fatigue crack growth and damage tolerance10.1111/ffe.12155 ↗
26. Two critical stress intensities for threshold fatigue crack propagation10.1016/0956-716X(93)90538-4 ↗
27. Effect of superimposed monotonic fracture modes on the ΔK and the Kmax parameters of fatigue crack propagation10.1016/S1359-6454(03)00159-9 ↗
28. Multiple mechanisms controlling fatigue crack growth10.1046/j.1460-2695.2003.00684.x ↗
29. Crack tip driving forces and crack growth representation under fatigue10.1016/S0142-1123(03)00105-1 ↗
30. A model for fatigue crack growth, part I: phenomenology10.1046/j.1460-2695.2000.00297.x ↗
31. A model for fatigue crack growth, part II: modelling10.1046/j.1460-2695.2000.00298.x ↗
32. A new (K+Kmax) 0.5 driving force parameter for crack growth in aluminum alloys10.1016/S0142-1123(01)00023-8 ↗
33. Fatigue crack closure under cyclic tension10.1016/0013-7944(70)90028-7 ↗
34. The significance of fatigue crack closure, damage tolerance in aircraft structures
35. A theory of fatigue crack growth10.1007/BF00182895 ↗
36. Effect of stress ratio on near-threshold propagation of delamination fatigue cracks in unidirectional CFRP10.1016/0266-3538(87)90076-5 ↗
37. Empirical model for stress ratio effect on fatigue delamination growth rate in composite laminates10.1016/j.ijfatigue.2003.10.016 ↗
38. High cycle fatigue crack propagation under random and constant amplitude loadings10.1016/0308-0161(76)90014-4 ↗
39. Forman RG, Mettu SR. Behavior of surface and corner cracks subjected to tensile and bending loads in Ti–6Al–4V alloy. In: Ernst HA, Saxena A, McDowell DL, editors. Fracture mechanics: twenty-second symposium, vol. 1. ASTM STP 1131. Philadelphia: American Society for Testing and Materials; 1992. p. 519–46.
40. Application of the Hartman–Schijve equation to represent Mode I and Mode II fatigue delamination growth in composites10.1016/j.compstruct.2011.11.030 ↗
41. Mode I, II and mixed Mode I/II delamination growth in composites10.1016/j.compstruct.2013.12.009 ↗
42. Fatigue damage mechanics of composite materials. II: A damage growth model10.1016/0266-3538(92)90110-O ↗
43. Effects of stress frequency and stress ratio on the fatigue of glass/epoxy composite materials10.4028/www.scientific.net/KEM.326-328.1031 ↗
44. Applicability of empirical models for evaluation of stress ratio effect on the durability of fiber-reinforced creep rupture–susceptible composites10.1007/s10853-010-4988-0 ↗
45. Nonlinear viscoelastic contribution to the cyclic accommodation of high density polyethylene in tension: experiments and modelling10.1016/j.ijfatigue.2013.06.013 ↗
46. Misinterpreting the results: how similitude can improve our understanding of fatigue delamination growth10.1016/j.compscitech.2010.11.010 ↗
47. Crack closure and fibre bridging during delamination growth in carbon fibre/epoxy laminates under mode I fatigue loading10.1016/j.compositesa.2014.08.028 ↗
48. Some formulas for crack opening stress level10.1016/0013-7944(81)90034-5 ↗
49. Schijve J. Fatigue crack closure, observations and technical significance. Report LR-485. Delft University of Technology; 1986.
50. Newman Jr JC. A finite-element analysis of fatigue crack closure. Mechanics of crack growth. ASTM STP 590; 1976.10.1520/STP33952S ↗
51. Fastran. A fatigue crack growth life-prediction code based on the crack-closure concept. User guide version 5.4. Fatigue & Fracture Associates, LLC, 670 North Lake Circle Eupora, MS 39744; 2013.
52. De Koning AU. A simple crack closure model for prediction of fatigue crack growth rates under variable amplitude loading. NLR MP 80006; 1980.10.1520/STP28791S ↗
53. http://www.matweb.com.
54. Fracture mechanics and fatigue: a historical perspective10.1046/j.1460-2695.1998.00054.x ↗
55. Paris PC, Harris DO. An engineering evaluation of the status of utilization of beryllium from the viewpoint of fracture mechanics. In: Proceedings of the beryllium conference: a report of the national materials advisory board, vol. 1. NMAB-272, NAS, Washington, D.C.; 1970. p. 537–68.10.2172/4134787 ↗
56. Fatigue crack propagation rate at low K of two aluminium sheet alloys, 2024-T3 and 7075-T610.1016/0013-7944(79)90134-6 ↗
57. Taylor D. A compendium of fatigue thresholds and growth rates. Engineering Materials Advisory Services Limited; 1985.
58. A total dissipated energy theory for fatigue crack growth in ductile solids10.1016/S0142-1123(02)00073-7 ↗
59. Crack-growth criteria and non-linear fracture mechanics10.1016/0022-5096(71)90008-1 ↗
60. A description of fatigue crack growth in terms of plastic work10.1016/0013-7944(83)90169-8 ↗
61. Orowan · 1950
62. Janssen · 2002
63. Fracture mechanics applied to engineering problems – strain energy density fracture criterion10.1016/0013-7944(74)90033-2 ↗
64. Application of strain energy density factor to fatigue crack growth analysis10.1016/0013-7944(80)90094-6 ↗
65. Fatigue analysis of an edge crack specimen: hysteresis strain energy density10.1016/0013-7944(84)90097-3 ↗
66. Some aspects of the energy based approach to fatigue crack propagation10.1016/j.ijfatigue.2008.01.010 ↗
67. ASTM E647-13. Standard test method for measurement of fatigue crack growth rates. West Conshohocken, PA: ASTM International; 2013. .
68. Pascoe JA, Alderliesten RC, Benedictus R. Towards understanding fatigue disbond growth via cyclic strain energy. 20th European conference on fracture (ECF20). Procedia Materials Science 2014;3:610–5.10.1016/j.mspro.2014.06.101 ↗
69. On the relationship between disbond growth and the release of strain10.1016/j.engfracmech.2014.10.027 ↗
70. Discussion on the use of the strain energy release rate for fatigue delamination characterization10.1016/j.compositesa.2014.06.018 ↗
71. Assessing plastically dissipated energy as a condition for fatigue crack growth10.1016/j.ijfatigue.2008.12.009 ↗
72. Numerical evaluation of Paris-regime crack growth rate based on plastically dissipated energy10.1016/j.engfracmech.2014.04.013 ↗
73. Critical review of some theories in fracture mechanics10.1007/BF00189139 ↗
74. The explanation of stress ratio effect and crack opening corrections for fatigue crack growth in metallic materials10.4028/www.scientific.net/AMR.891-892.289 ↗