Fretting fatigue crack growth simulation based on a combined experimental and XFEM strategy
Source abstract
Abstract
A combined experimental and numerical study is presented in order to predict fretting crack propagation. It rests on 2D and 3D fretting tests, with carefully controlled loading conditions leading to cracking as the main material response, the extraction of 2D and 3D crack geometry from post-mortem cross-sections, a three-dimensional X-FEM model based on a three field weak formulation accounting for 3D non-planar frictional crack and the level set formalism authorising a direct use of actual reconstructed crack shape, the stress intensity factors quantification, a mixed mode Paris law identification and finally the crack growth simulation. The 2D fretting tests are numerically simulated. The mixed mode crack growth law identified is then used to simulate the fretting crack growth. A very good agreement with experimental results is obtained. Then 3D fretting tests are simulated and the crack fronts are compared with actual ones.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Vibration and Dynamic Analysis · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. On fretting maps10.1016/j.ijfatigue.2010.03.008 ↗
2. Mechanics and materials in fretting10.1016/0043-1648(92)90266-B ↗
3. Waterhouse RB. Fretting corrosion. Elmsford, New York: Pergamon Press Inc.
4. Quantification of fretting damage10.1016/S0043-1648(96)07306-1 ↗
5. Modelling of initial fatigue crack growth and crack branching under fretting conditions10.1046/j.1460-2695.1999.00173.x ↗
6. In situ analysis and modeling of crack initiation and propagation within model fretting contacts using polymer materials10.1016/S0301-679X(02)00137-8 ↗
7. Dubourg M-C, Lamacq V. Stage II crack propagation direction determination under fretting fatigue loading: a new approach in accordance with experimental observations. Fretting fatigue: current technology and practices, vol. 1367. American Society for Testing and Materials Special Technical Publications; 2000; 450–463.10.1520/STP14746S ↗
8. Characterization of internal damage in a MMCp using X-ray synchrotron phase contrast microtomography10.1016/S1359-6454(99)00024-5 ↗
9. Observation of microstructure and damage in materials by phase sensitive radiography10.1063/1.364374 ↗
10. Three dimensional imaging of damage in structural materials using high resolution micro-tomography10.1016/j.nimb.2005.06.021 ↗
11. In situ analysis of the fragmentation of polystyrene films within sliding contacts10.1016/j.triboint.2005.07.018 ↗
12. 3D crack network analysis during a scratch test of a polymer: a combined experimental and multigrid X-FEM based numerical approach10.1016/j.triboint.2010.04.014 ↗
13. Analysis of pad size effects in fretting fatigue using short crack arrest methodology10.1016/S0142-1123(99)00077-8 ↗
14. Fouvry S, Kapsa Ph, Vincent L. Developments of fretting sliding criteria to quantify the local friction coefficient evolution under partial slip condition. In: Dowson D et al., editors. 24th Leeds-Lyon symposium, vol. 34. Tribology Series; 1997. p. 161–72.10.1016/S0167-8922(98)80071-0 ↗
15. A Fretting crack initiation prediction taking into account the surface roughness and the crack nucleation process volume10.1016/j.ijfatigue.2004.09.001 ↗
16. A multiaxial fatigue analysis of fretting contact taking into account the size effect. Fretting fatigue: current technology an practices
17. On the initiation of fretting fatigue cracks10.1016/S0043-1648(96)07302-4 ↗
18. Investigation into effects and interaction of various fretting fatigue variables under slip-controlled mode10.1016/j.triboint.2006.02.011 ↗
19. Characterization of crack nucleation in TA6V under fretting–fatigue loading using the potential drop technique
20. Characterisation of fretting fatigue damage using synchrotron X-ray micro-tomography10.1016/j.triboint.2006.02.047 ↗
21. Determination and prediction of the fretting crack initiation: introduction of the (P, Q, N) representation and definition of a variation process volume10.1016/j.ijfatigue.2005.09.005 ↗
22. Prediction of fretting crack propagation based on a short crack methodology10.1016/j.engfracmech.2007.06.011 ↗
23. Introduction of a fretting–fatigue mapping concept: development of a dual crack nucleation crack propagation approach to formalize fretting–fatigue damage10.1016/j.ijfatigue.2008.09.002 ↗
24. A finite element method without remeshing10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.0.CO;2-J ↗
25. Non-planar 3D crack growth with the extended finite element and level sets – Part I: mechanical model10.1002/nme.429 ↗
26. Non-planar 3D crack growth with the extended finite element and level sets – Part 2: Level set update10.1002/nme.430 ↗
27. A study on the representation of cracks with level sets10.1002/nme.1915 ↗
28. An extended finite element method for modelling crack growth with frictional contact10.1016/S0045-7825(01)00260-2 ↗
29. Extended finite element method for fretting fatigue crack propagation10.1016/j.ijsolstr.2008.06.009 ↗
30. A stable Lagrange multiplier space for stiff interface conditions within the extended finite element method10.1002/nme.2515 ↗
31. A contact algorithm for frictional crack propagation with the extended finite element method10.1002/nme.2376 ↗
32. A new fatigue frictional contact crack propagation model with the coupled XFEM/LATIN method10.1016/j.cma.2007.03.004 ↗
33. A stable 3D contact formulation for cracks using X-FEM10.3166/remn.16.259-275 ↗
34. An X-FEM approach for large sliding contact along discontinuities10.1002/nme.2532 ↗
35. A two-scale eXtended Finite Element Method for modeling 3D crack growth with interfacial contact10.1016/j.cma.2009.12.006 ↗
36. 3D two scale X-FEM crack model with interfacial frictional contact: application to fretting–fatigue10.1016/j.triboint.2010.05.004 ↗
37. 3D experimental and X-FEM frictional contact fatigue crack model. Prediction of fretting problems10.1016/j.crme.2011.05.011 ↗
38. Stabilized global–local X-FEM for 3D non-planar frictional crack using relevant meshes10.1002/nme.3232 ↗
39. On the crack extension in plates under plane loading and transverse shear J10.1115/1.3656897 ↗
40. Strain–energy–density factor applied to mixed mode crack problems10.1007/BF00035493 ↗
41. Propagation of a crack under general, in-plane tension10.1007/BF00185207 ↗
42. Propagation of fatigue cracks under polymodal loading10.1111/j.1460-2695.1982.tb01237.x ↗
43. Hourlier F, D’Hondt H, Truchon M, Pineau A. Fatigue crack path behaviour under polymodal fatigue. In: Miller, K.J., Brown, M.W.; STP 853, 228 1985.10.1520/STP36226S ↗
44. A predictive rolling contact fatigue crack growth model: onset of branching, direction, and growth – role of dry and lubricated conditions on crack patterns10.1115/1.1479698 ↗
45. Johnson · 1985
46. A multi-model X-FEM strategy dedicated to frictional crack growth under cyclic fretting fatigue loadings10.1016/j.ijsolstr.2010.02.003 ↗
47. A theoretical model for the prediction of initial growth angles and sites of fretting fatigue cracks10.1016/S0301-679X(96)00068-0 ↗
48. Crack path prediction under fretting fatigue – a theoretical and experimental approach10.1115/1.2831599 ↗