Effect of welding parameters on the fatigue properties of dissimilar AISI 2205–AISI 1020 joined by friction welding
Source abstract
Abstract
Abstract In this study, AISI 2205 duplex stainless steel, most commonly used in its class and economical AISI 1020 steel couple with low carbon content, were connected using different operation parameters through friction welding. Tension test and rotary bending fatigue test were applied to the welded connections, and the impact of the welding parameters on fatigue strength was examined. It was discovered that when the welding parameters used in connecting AISI 2205 and AISI 1020 steel couple through friction welding were selected correctly, fatigue strength of the connection would increase compared to the main material, and incompliant parameters decreased fatigue strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Investigation of the mechanical properties and microstructure of friction welded joints between AISI 4140 and AISI 1050 steels10.1016/j.matdes.2008.06.070 ↗
2. Dinc D. Investigation of weldability of AISI 1020 and AISI 304 steels by friction welding. M.Sc. Thesis. Balıkesir Üniversity, Institute of Science, Balıkesir; 2006.
3. Gürler M. Friction welding characteristics of aluminum alloy. PhD. Thesis. Marmara Üniversity, Institute of Science, İstanbul; 2000.
4. http://www.mtiwelding.com. Worldwide Joining&Welding Solution; 12 December 2011.
5. Parameter optimisation in friction welding dissimilar materials
6. Weldability and joining characteristics of AISI 420/AISI 1020 steels using friction welding10.3139/146.110917 ↗
7. Microstructure and mechanical behaviour of friction welded AISI 2205/AISI 1040 steel joints10.3139/120.110379 ↗
8. Prediction of fatigue life and its probability distribution of notched friction welded joints under variable-amplitude loading10.1016/S0142-1123(00)00021-9 ↗
9. Özdemir N. Investigation of weldability of fine-grained low alloyed high carbon steels by friction welding, PhD. Tehsis. Fırat Üniversity, Institute of Science, Elazığ; 2002.
10. Evaluation of tensile strength and fatigue strength of SUS304 stainless steel friction welded joints
11. Dissimilar metal friction welding of austenitic–ferritic stainless steels10.1016/j.jmatprotec.2004.05.017 ↗
12. Evaluation of the joint interface properties of austenitic-stainless steels (AISI 304) joined by friction welding10.1016/j.matdes.2006.05.031 ↗
13. Fatigue behaviour of friction welded medium carbon steel and austenitic stainless steel dissimilar joints10.1016/j.matdes.2010.12.011 ↗
14. A comparative study on fatigue damage assessment of welded joints under uniaxial loading based on energy methods10.1016/j.proeng.2010.03.218 ↗
15. Characterization of mechanical properties in AISI 1040 parts welded by friction welding10.1016/j.matchar.2006.09.008 ↗
16. A study on the crack initiation and growth from δ-ferrite/γ phase interface under continuous fatigue and creep-fatigue conditions in type 304L stainless steels10.1016/S0142-1123(02)00019-1 ↗
17. Fatigue strength of friction-welded joints between steels 20 and 40 Kh
18. Fatigue properties of inertia dissimilar friction-welded stainless steels10.1016/j.jmatprotec.2004.04.400 ↗
19. Effect of rotational speed on the interface properties of friction-welded AISI 304L to 4340 steel10.1016/j.matdes.2005.06.011 ↗
20. A study into effects of different parameters on mechanical properties in friction stir welding of AA 2024 aluminium alloy
21. Aran A, Demirkol M. Manufacturing processes lecture notes, İstanbul; 1995.