Local crack plasticity and its influences on the global elastic stress field
Source abstract
Abstract
Abstract This paper presents the background and development of a novel ‘plastic inclusion’ approach for dealing with the local plasticity which occurs at the tip of a growing fatigue crack. Localised plasticity arises from crack growth mechanisms and essentially blunts the crack, creates a reversed cyclic plastic zone, and induces shear along the crack flanks, along with the possible generation of wake contact stresses which act on the applied elastic stress field at the boundary of the elastic–plastic enclave surrounding the crack. The paper outlines the development of a meso-scale model of the elastic stress field around a growing crack that explicitly incorporates these interaction effects. The outcome is a modified crack tip stress intensity factor that includes some aspects of the magnitude of plastic wake-induced crack tip shielding and which the authors propose has the potential to help resolve some long-standing controversies associated with plasticity-induced closure. A full-field approach is developed for stress using photoelasticity and also for displacement using digital image correlation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Numerical methods in engineering · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Misinterpreting the results: how similitude can improve our understanding of fatigue delamination growth10.1016/j.compscitech.2010.11.010 ↗
2. The fracture mechanics similitude concept: questions concerning its application to the behaviour of short fatigue cracks10.1016/0025-5416(83)90223-9 ↗
3. A rational analytic theory of fatigue
4. Characteristics of the process zone at sharp notch roots10.1016/j.ijsolstr.2011.03.023 ↗
5. The theory of critical distances as an alternative experimental strategy for the determination of K1C and ΔKth10.1016/j.engfracmech.2010.04.016 ↗
6. Fatigue crack growth and craze-induced crack tip shielding in polycarbonate10.1016/j.polymer.2012.01.032 ↗
7. Crack tip deformation fields and fatigue crack growth rates in Ti–6Al–4V10.1016/j.ijfatigue.2009.02.043 ↗
8. Thermoelastic stress analysis of fatigue cracks subject to overloads10.1111/j.1460-2695.2010.01471.x ↗
9. Pokluda J. Dislocation-based model of crack-tip shielding effects. In: James MN, Yates JR, Susmel L, Iacoviello F, editors. Proceedings of 1st IJFatigue and FFEMS joint workshop on characterisation of crack tip stresses, Gruppo Italiano Frattura; 2011. p. 162–9.
10. Towards a new model of crack tip stress fields10.1007/s10704-008-9209-3 ↗
11. Some unresolved issues with fatigue crack closure – measurement, mechanism and interpretation problems
12. Analysis of closure in fatigue crack growth10.1115/1.3424286 ↗
13. Observations on evaluating fatigue crack closure from compliance traces10.1016/0142-1123(89)90184-9 ↗
14. Allison JE, You CP. Problems associated with quantification of fatigue crack closure. In: Proceedings of the 4th international conference on fatigue and fatigue thresholds, Honolulu, Hawaii, vol. 2; 1990. p. 1249–54.
15. Critical aspects of the characterization of crack tip closure by compliance techniques10.1016/0025-5416(85)90074-6 ↗
16. A demonstration of problems associated with crack closure measurement techniques10.1016/0013-7944(88)90111-7 ↗
17. Crack closure—is it just a surface phenomenon?10.1016/0142-1123(82)90043-3 ↗
18. Reconsideration of fatigue crack closure10.1016/0956-716X(92)90164-A ↗
19. Contribution of the cyclic loading portion below the opening load to fatigue crack growth10.1016/0921-5093(95)10079-2 ↗
20. Introducing the compliance ratio concept for determining effective stress intensity10.1016/S0142-1123(97)00024-8 ↗
21. A quantitative evaluation of fatigue crack shielding forces using photoelasticity10.1016/j.engfracmech.2008.03.013 ↗
22. Glinka G, Buczynski A, 2011. Experimental and numerical analysis of elastic–plastic strains and stresses ahead of a growing fatigue crack. In: James MN, Yates JR, Susmel L, Iacoviello F, editors. Proceedings of 1st IJFatigue and FFEMS joint workshop on characterisation of crack tip stresses, Gruppo Italiano Frattura, p. 201–7.
23. Effect of T-stress on fatigue crack closure in 3-D small-scale yielding10.1016/j.ijsolstr.2003.11.004 ↗
24. Quantification of constraint on elastic–plastic 3D crack front by the J–A2 three-term solution10.1016/S0013-7944(00)00134-X ↗
25. Slaughter WS. The linearized theory of elasticity, Section 9.4. Birkhausen, Boston; 2001.10.1007/978-1-4612-0093-2 ↗
26. A new photoelastic model for studying fatigue crack closure10.1007/BF02428989 ↗
27. Cyclic stress fields ahead of tension fatigue cracks in amorphous polymers10.1016/0032-3861(94)90126-0 ↗
28. The effect of specimen thickness and stress ratio on the fatigue behavior of polycarbonate10.1002/pen.10524 ↗
29. Ductile fatigue crack propagation in polycarbonate10.1016/0032-3861(86)90037-6 ↗
30. Hawinkels RJH. Fatigue crack propagation in polycarbonate. MT 11-30 Thesis. Eindhoven University of Technology; 2011.
31. Tada · 2000
32. Effect of constraint induced by crack depth on creep crack-tip stress field in CT specimens10.1016/j.ijsolstr.2009.09.015 ↗
33. The effective T-stress estimation and crack paths emanating from U-notches10.1016/j.engfracmech.2010.03.010 ↗
34. T-stress and its implications for crack growth10.1016/S0013-7944(02)00002-4 ↗
35. Wang Y-Y. A two-parameter characterisation of elastic–plastic crack tip fields and applications to cleavage fracture. PhD Thesis. MIT; 1991.
36. Fatigue crack growth in austempered ductile and grey cast irons – stress ratio effects in air and mine water10.1016/S0921-5093(98)01140-X ↗
37. A comparison between actual and stress intensity near-crack-tip elastic fields10.1016/S0142-1123(00)00033-5 ↗
38. On higher order terms in the crack tip stress field10.1007/s10704-010-9443-3 ↗
39. Secondary elastic crack tip stresses which may influence very slow fatigue crack growth—additional results10.1016/j.ijfatigue.2005.07.005 ↗
40. Numerical investigations of crack-tip constraint parameters in two-dimensional geometries10.1016/S0308-0161(00)00020-X ↗
41. The effect of non-singular stresses on crack-tip constraint10.1016/0022-5096(91)90041-L ↗