Fatigue strength experiments of corroded small scale steel specimens
Source abstract
Abstract
The objective of this work is to analyse the fatigue strength of small scale corroded steel specimens. The specimens were cut from a box girder, which was initially corroded in real sea water conditions. The surface of 11 corroded specimens was analysed applying photogrammetry techniques and a description of an idealized corroded surface was established. The non-corroded specimens are identified as FAT 86 category but the fatigue test demonstrated that due to the severe corrosion degradation the experimental fatigue results of the corroded specimens are located above the fatigue design category FAT 50 and below FAT 100 referring to the nominal stress approach. The regression analysis of fatigue test results leads to m=3.094 and 97.7%, m 3 s = D = 64.95 MPa. Fatigue assessment of crack propagation on a pit like crack flow based on a failure assessment diagram was performed. The admissible initial idealized flow defect has been defined, which matches the fatigue life achieved by the fatigue test for different load categories and corrosion degradation level.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Integrity and Reliability Analysis · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. TSCF · 1992
2. TSCF, Guidance Manual for Tanker Structures (Tanker Structure Co-operative Forum), Tanker Structure Cooperative Forum; 1997.
3. A study on the degradation of coating and corrosion on shiṕs hull based on the probabilistic approach10.1115/1.2829532 ↗
4. Wang G, Spencer J, Elsayed T. Estimation of corrosion rates of oil tankers. In: Proceedings of the 22nd International Conference on Offshore Mechanics and Arctic Engineering, ASME. OMAE 2003; 2003. p. 37361.
5. A probabilistic corrosion rate estimation model for longitudinal strength members of bulk carriers
6. Reliability of maintained, corrosion protected plates subjected to non-linear corrosion and compressive loads10.1016/S0951-8339(99)00028-3 ↗
7. Nonlinear time dependent corrosion wastage of deck plates of ballast and cargo tanks of tankers10.1115/1.2426987 ↗
8. Corrosion wastage model for ship crude oil tanks10.1016/j.corsci.2008.08.035 ↗
9. Influence of environmental factors on corrosion of ship structures in marine atmosphere10.1016/j.corsci.2009.05.028 ↗
10. Effect of environmental factors on steel plate corrosion under marine immersion conditions10.1179/147842209X12559428167841 ↗
11. Ultimate strength of plate elements with pit corrosion wastage
12. Effect of pitting corrosion on the ultimate strength of steel plates subjected to in-plane compression and bending10.1007/s00773-005-0203-4 ↗
13. A closed form formula to predict the ultimate capacity of pitted mild steel plate under biaxial compression10.1016/j.tws.2012.04.007 ↗
14. Reliability of corrosion protected and maintained ship hulls subjected to corrosion and fatigue10.5957/jsr.1999.43.2.65 ↗
15. Fatigue damage of structural joints accounting for nonlinear corrosion10.5957/jsr.2002.46.4.289 ↗
16. Reliability-based assessment of deteriorating ship structures operating in multiple sea loading climates10.1016/j.ress.2006.12.008 ↗
17. Fatigue damage assessment based on global and local stress approaches accounting for corrosion10.1016/j.ijfatigue.2012.04.004 ↗
18. Spectral fatigue damage assessment of tanker deck structural detail subjected to time-dependent corrosion10.1016/j.ijfatigue.2012.10.014 ↗
19. Detail design of welded ship structures based on hot-spot stresses
20. Model uncertainty in the long-term distribution of wave-induced bending moment for fatigue design of ship structure10.1016/0951-8339(91)90008-Y ↗
21. Fatigue damage assessment of ship structural components based on the long-term distribution of local stresses
22. A critical analysis of crack propagation laws10.1115/1.3656900 ↗
23. Reliability of maintained ship hull subjected to corrosion and fatigue10.1016/S0167-4730(98)00005-8 ↗
24. Petershagen H, Fricke W, Massel T. Application of the local approach to the fatigue strength assessment of welded structures in ships. In: International Institute of Welding; 1991.
25. Radaj · 1990
26. Recent developments in local concepts of fatigue assessment of welded joints10.1016/j.ijfatigue.2008.05.019 ↗
27. Niemi E. Determination of stresses for fatigue analysis of welded components. In: Proceedings of the IIW, Conference on Design in Welded, Construction; 1992. p. 57–74.
28. Niemi · 1995
29. Niemi E, Fricke W, Maddox S. Structural stress approach to fatigue analysis of welded components – designeŕs guide. In: IIW Doc. XIII-1819-00/XV-1090-01; 2004.
30. Fatigue analysis of ship deck structure accounting for imperfections10.1016/j.ijfatigue.2008.01.015 ↗
31. Influence of steel strength on the fatigue reliability of welded structural components10.1016/j.ijfatigue.2003.10.020 ↗
32. Large scale corrosion tests
33. Corrosion-dependent ultimate strength assessment of aged box girders based on experimental results10.5957/JOSR.55.4.100042 ↗
34. Effect of corrosion degradation on the ultimate strength of steel box girders10.1179/1743278212Y.0000000005 ↗
35. Ultimate strength assessment of corroded box girders10.1016/j.oceaneng.2012.09.019 ↗
36. Application of a photogrammetry-based system to measure and reengineer ship hulls and ship parts: An industrial practices-based report10.1016/j.cad.2010.02.005 ↗
37. Ljubenkov B, Zaplatic T, Ziha K. Measurements for reliability of ship design, Production and operation interacion; 2008.
38. Menna F, Ackermann S, Scamardella A, Troisi S. Digital photogrammetry: a useful tool for shipbuilding applications. In: Proceedings of the 13th Congress of International Maritime Association of Mediterranean, IMAM, Istanbul, Turkey; 2009. p. 607–14.
39. Displacement Measurement of Box Girder Based on Photogrammetry
40. Measurement of weld induced deformations in three-dimensional structures based on photogrammetry technique
41. Chen BQ, Garbatov Y, Guedes Soares C. Automatic approach for measuring deformations in complex structures using photogrammetry technique. In: Proceedings of the XXII Pan American Conference of Naval Engineering, Maritime Transportation & Ports Engineering, Buenos Aires, Argentina; 2011.
42. ATOS, 3D scanner ATOS, ; 2013.
43. Eurocode. Design of steel structures. Brüssel: European Committee for Standardisation; 1992.
44. Hobbacher A. Recommendations for fatigue design of welded joints and components, IIW doc.1823-07, Welding Research Council Bulletin 520, International Institute of Welding, New York; 2009.
45. Bai W. Servohydraulic testing machine w+b LFV50-HH/EDC120 with control unit DIGWIN 2000 of manufacturer Walter Bai, ; 2013.
46. Dion-Pro-software, ; 2013.
47. Effect of pitting corrosion on local strength of hold frames of bulk carriers (2nd report) - Lateral-distortional buckling and local face buckling10.1016/j.marstruc.2005.03.001 ↗
48. Effect of pitting corrosion on local strength of hold frames of bulk carriers10.1016/j.marstruc.2004.10.001 ↗
49. Hellan · 1988
50. BS7910. British Standard BS7910, Guide to methods for assessing the acceptability of flaws in metallic structures, BSI, London; 2005.
51. ASTM. Standard E 1290. Standard test method for crack-tip opening displacement (CTOD) fracture toughness measurement, American Society of Testing and Materials, Philadelphia; 1995.
52. Finite element analysis of some joints with the welds transverse to the direction of stress
53. DnV, Fatigue assessment of ship structures, Classification notes 30.7, Det Norske Veritas, Hovik, Norway, 2003.