Directional and notch effects on the fatigue behavior of as-built DMLS Ti6Al4V
Source abstract
Abstract
Abstract The metal additive manufacturing technology produces components of any geometrical complexity directly from a computer model. Full exploitation of metal AM technology may result in parts that can be lighter in weight, cheaper to produce, and have complex geometries that are difficult or impossible to produce with conventional methods. Two aspects significantly affecting the fatigue behavior of DMLS Ti6Al4V are investigated: (i) the as-built surface condition, which is known to introduce a significant knock-down factor in fatigue with respect to the machined condition, and (ii) the presence of a geometrical notch, which affect conventional materials but has not yet been studied in metal AM parts. After the preliminary determination of the reference unnotched fatigue response, the notch fatigue behavior of as-built DMLS Ti6Al4V specimens is determined. Four different notch fatigue factors are estimated including the influence of notch direction with respect to build direction and the notch fabrication conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Bandyopadhyay · 2016
2. Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research10.1016/j.ijfatigue.2015.12.003 ↗
3. Lütjering · 2007
4. Microstructures and mechanical properties of Ti6Al4V parts fabricated by selective laser melting and electron beam melting10.1007/s11665-013-0658-0 ↗
5. Residual stress within metallic model made by selective laser melting process10.1016/S0007-8506(07)60677-5 ↗
6. Simonelli, M, Tse YY, Tuck C. Further understanding of Ti-6Al-4V selective laser melting using texture analysis. In 23rd Annual International Solid Freeform Fabrication Symposium 2012:480–491.
7. High cycle fatigue (HCF) performance of Ti-6Al-4V Alloy processed by selective laser melting10.4028/www.scientific.net/AMR.816-817.134 ↗
8. Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties10.1016/j.jallcom.2012.07.022 ↗
9. Fatigue behaviour of notched additive manufactured Ti6Al4V with as-built surfaces10.1016/j.ijfatigue.2017.04.009 ↗
10. Konečná R, Nicoletto G, Fintová S, Frkáň M. As-built surface layer characterization and fatigue behavior of DMLS Ti6Al4V, Proceedings FMDM3, Lecco 2017, [in press].10.1016/j.prostr.2017.11.065 ↗
11. ASTM F2924–14, Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion, ASTM International, West Conshohocken, PA, www.astm.org (2014).
12. Anisotropic high cycle fatigue behavior of Ti-6Al-4V obtained by powder bed laser fusion10.1016/j.ijfatigue.2016.04.032 ↗
13. Influence of build direction on the fatigue behaviour of Ti6Al4V alloy produced by direct metal laser sintering
14. Fatigue performance evaluation of selective laser melted Ti–6Al–4V10.1016/j.msea.2014.01.041 ↗
15. Mechanical behavior of additive manufactured, powder-bed laser-fused materials10.1016/j.msea.2015.10.068 ↗
16. Gong H, Rafi K, Starr T, Stucker B. The effects of processing parameters on defect regularity in Ti-6Al-4V parts fabricated by selective laser melting and electron beam melting. In 24th Annual International Solid Freeform Fabrication Symposium. 2013:424–439.
17. VDI-Guidline 3405 Part 3 Dec 2015, Additive Manufacturing Processes, Rapid Manufacturing – Design Rules for Part Production using Laser Sintering and Laser Beam Melting 2015.
18. Juvinall · 2012
19. Nicholas · 2006
20. Overview of materials qualification needs for metal additive manufacturing10.1007/s11837-015-1810-0 ↗