Delamination in Fiber Metal Laminates (GLARE) during fatigue crack growth under variable amplitude loading
Source abstract
Abstract
This paper presents a study on the influence that load variations have on delamination shapes in Fibre Metal Laminates. Previously fatigue tested centre-crack tension specimens have been chemically etched to obtain the final delamination shapes. In addition, fatigue crack growth tests on similar specimens have been performed to investigate the formation of delamination shapes. For this purpose, digital image correlation has been used as strain measurement technique to record the delamination shapes in situ testing. An explanation is put-forward in order to understand the effects of variable amplitude loading on the formation of delamination shapes. A transition in delamination shapes was observed, but evaluating this observation using an analytical fatigue crack growth prediction model including the observed change in delamination shapes revealed no significant effect on subsequent crack growth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Optical measurement and interference techniques · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Delamination growth in fibre metal laminates under variable amplitude loading10.1016/j.compscitech.2009.07.019 ↗
2. Roebroeks GHJJ. Towards glare – the development of a fatigue insensitive and damage tolerant aircraft material. Ph.D. Thesis, Delft: Delft University of Technology; 1991.
3. Crack closure in fiber metal laminates10.1111/j.1460-2695.2007.01140.x ↗
4. Fatigue crack growth in fibre metal laminates under selective variable-amplitude loading10.1111/j.1460-2695.2009.01333.x ↗
5. Application of a modified wheeler model to predict fatigue crack growth in fibre metal laminates under variable amplitude loading10.1016/j.engfracmech.2010.03.041 ↗
6. Fatigue behaviour and life prediction of fibre reinforced metal laminates under constant and variable amplitude loading10.1046/j.1460-2695.2002.00517.x ↗
7. Fatigue crack propagation behaviour under variable amplitude loading, in fatigue crack growth under variable amplitude
8. Stress state-related fatigue crack growth under spectrum loading10.1111/j.1460-2695.1992.tb01307.x ↗
9. Investigation of yield strength and single cycle overload on crack closure10.1016/0308-0161(92)90105-O ↗
10. Overload effects on fatigue behaviour and life prediction of low-carbon steels10.1016/0142-1123(95)99733-Q ↗
11. Fatigue crack growth studies under combination of single overload and cyclic condensation environment10.1016/0013-7944(94)00217-6 ↗
12. Pandey RK, Verma BB. Overload induced fatigue crack growth and significance of retardation zone. In: Proceedings of IX ICF, 1997. p. 1285–97.
13. Load interaction effects during fatigue crack growth under variable amplitude loading – a literature review. Part I: Empirical trends10.1046/j.1460-2695.1998.00083.x ↗
14. Effects of loading variables on overload induced fatigue crack growth retardation parameters10.1023/A:1004624213382 ↗
15. Newman JC. A crack-closure model for predicting fatigue crack growth under aircraft spectrum loading. In: Change JB, Hudson CM, editors. Methods and models for predicting fatigue crack growth under random loading, no. ASTM STP 748, American Society of Testing and Materials; 1081. p. 53–84.10.1520/STP28334S ↗
16. Characterization of delamination growth behaviour of hybrid bonded laminates10.1111/j.1460-2695.1997.tb01522.x ↗
17. Alderliesten RC, Woerden HJM. Load history effects during fatigue crack propagation in glare. In: Guillaume M, editor. Fatigue of aeronautical structures as an engineering challenge, vol. I, 2003. p. 509–30.
18. Fatigue behaviour of carbon fibre-reinforced aluminium laminates10.1016/0010-4361(91)90672-4 ↗
19. Fatigue crack propagation in ARALL lamiantes: measurement of the effect of crack-tip shielding from crack bridging10.1016/0013-7944(89)90309-3 ↗
20. Fiber metal laminates the synthesis of metals and composites10.1080/10426919408934905 ↗
21. Off-axis fatigue cracking behaviour in notched fibre metal laminates10.1111/j.1460-2695.2007.01185.x ↗
22. Progressive damage and residual strength of a carbon fibre reinforced metal laminate10.1177/002199839703100802 ↗
23. Development of the delamination evaluation parameters (i) – the delamination aspect ratio and the delamination shape factors10.1007/BF02990435 ↗
24. Analytical prediction model for fatigue crack propagation and delamination growth in glare10.1016/j.ijfatigue.2006.07.006 ↗
25. Alderliesten RC. Fatigue crack propagation and delamination growth in glare. Ph.D. Thesis, Delft: Delft University of Technology; 2005.
26. Some formulas for the crack opening stress level10.1016/0013-7944(81)90034-5 ↗
27. Rensma E. Investigation of innovative concepts for hybrid structures. Master’s thesis, Delft: Delft University of Technology; 2007.
28. Application of the energy release rate approach for delamination growth in glare10.1016/j.engfracmech.2005.10.006 ↗
29. Khan SU, Alderliesten RC, Benedictus R. Lda’s applicability for predicting fatigue crack growth in fml’s under va loading. In: 49th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and materials conference, Schaumburg (IL)., no. AIAA-2008-2017 in AIAA; 2008. p. 1–12.10.2514/6.2008-2017 ↗
30. Advances in two-dimensional and three-dimensional computer vision10.1007/3-540-48800-6_10 ↗
31. Digital image correlation analysis of interfacial debonding properties and fracture behavior in concrete10.1016/j.engfracmech.2006.01.035 ↗
32. The power of digital image correlation for detailed elastic–plastic strain measurements
33. An experimental approach to investigate detailed failure mechanisms in fibre metal laminates
34. Characterisation of fatigue crack growth and related damage mechanisms in FRP–metal hybrid laminates10.1016/j.compscitech.2007.11.013 ↗
35. Rodi R, Campoli G, Alderliesten RC, Benedictus R. Characterization of the crack tip behavior in fibre metal laminates by means of digital image correlation. In: 50th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and materials conference, Palm Springs (CA), no. AIAA-2009-2586, AIAA; 2009. p. 1–18.10.2514/6.2009-2586 ↗
36. Fatigue crack growth of a GLARE 3-5/4 fiber/metal laminate and validity of methods for analysing results
37. Rodi R, Alderliesten RC, Benedictus R. The effect of external stiffeners on the fatigue crack growth in fibre metal laminates. In: Lazzeri ASL, editor. ICAF 2007 – Durability and damage tolerance of aircraft structures: metal vs. composites-24th symposium of the international committee on aeronautical fatigue, Naples, Italy; 2007. p. 858–75.
38. Khan SU, Alderliesten RC, Benedictus R. Icaf 2009, bridging the gap between theory and operational practice proceedings of the 25th symposium of the international committee on aeronautical fatigue, Rotterdam, The Netherlands, 2729 may 2009. In: Bos M, editor. Crack growthin fibre metal laminates under variable amplitude loading, Netherlands: Springer; 2009. p. 839–58.10.1007/978-90-481-2746-7_45 ↗