Thermal plasto-elastohydrodynamic lubrication-wear-contact fatigue coupled modeling in mixed lubrication rolling-sliding contact
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Gear and Bearing Dynamics Analysis · Tribology and Lubrication Engineering · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. Thermo-mechanical characteristics of high-speed and heavy-load modified gears with elasto-hydrodynamic contacts10.1016/j.triboint.2018.11.008 ↗
2. Study on coupling transient mixed lubrication and time-varying wear of main bearing in actual operation of low-speed diesel engine10.1016/j.triboint.2023.109159 ↗
3. The influence of gear surface roughness on rolling contact fatigue under thermal elastohydrodynamic lubrication with slip10.1016/j.triboint.2020.106394 ↗
4. Application of average flow model to lubrication between rough sliding surfaces10.1115/1.3453329 ↗
5. Zhu D, Cheng H. Effect of surface roughness on the point contact EHL; 1988.10.1115/1.3261571 ↗
6. Effect of surface roughness on pressure spike and film constriction in elastohydrodynamically lubricated line contacts10.1080/10402009008981955 ↗
7. A mixed elastohydrodynamic lubrication model with asperity contact10.1115/1.2834093 ↗
8. A full numerical solution to the mixed lubrication in point contacts10.1115/1.555322 ↗
9. Effects of differential scheme and mesh density on EHL film thickness in point contacts10.1115/1.2194916 ↗
10. Mixed elastohydrodynamic lubrication in finite roller contacts involving realistic geometry and surface roughness10.1115/1.4005952 ↗
11. A theoretical analysis of the mixed elastohydrodynamic lubrication in elliptical contacts with an arbitrary entrainment angle10.1115/1.4028126 ↗
12. Multi-field coupling lubrication interface heat transfer model for hypoid gear transmission10.1016/j.icheatmasstransfer.2024.107451 ↗
13. Mixed elastohydrodynamic lubrication of transversely isotropic coatings in impact motion
14. Plasto-elastohydrodynamic lubrication (PEHL) in point contacts10.1115/1.4001813 ↗
15. Simulation of plasto-elastohydrodynamic lubrication in line contacts of infinite and finite length10.1115/1.4030690 ↗
16. Plasto-elastohydrodynamic lubrication in point contacts for surfaces with three-dimensional sinusoidal waviness and real machined roughness10.1115/1.4027478 ↗
17. Three-dimensional plasto-elastohydrodynamic lubrication (PEHL) for surfaces with irregularities10.1115/1.4004100 ↗
18. A new 3D plastoelastohydrodynamic lubrication model for rough surfaces10.1007/s40544-023-0793-z ↗
19. A new 3-D multi-physics coupling model for lubricated piston-liner systems
20. Effect of loading pressure on tribological properties for valve plate pair during the running-in process10.1080/10402004.2024.2320693 ↗
21. On the running-in nature of metallic tribo-components: a review
22. Transient mixed thermal elastohydrodynamic lubrication under startup and shut down conditions
23. Andersson S, Olofsson U. Towards a general model for wear simulation, in: IRG-OECD Meeting, Uppsala, Sweden; 2005.
24. A random wear model for the interaction between a rough and a smooth surface10.1016/j.wear.2006.12.075 ↗
25. Micropitting modelling in rolling–sliding contacts: application to rolling bearings10.1080/10402004.2011.587633 ↗
26. Prediction of micropitting damage in gear teeth contacts considering the concurrent effects of surface fatigue and mild wear10.1016/j.wear.2017.11.016 ↗
27. Simulation of sliding wear in mixed lubrication10.1115/1.2736439 ↗
28. Surface topography and friction coefficient evolution during sliding wear in a mixed lubricated rolling-sliding contact10.1016/j.triboint.2019.05.013 ↗
29. A deterministic mixed lubrication model for parallel rough surfaces considering wear evolution10.1016/j.triboint.2024.109443 ↗
30. Predictions of friction and wear in ball bearings based on a 3D point contact mixed EHL model10.1016/j.surfcoat.2025.131939 ↗
31. Numerical modeling and experimental investigation on fatigue failure and contact fatigue life forecasting for 8620H gear10.1016/j.engfracmech.2024.109861 ↗
32. A fatigue model for contacts under mixed elastohydrodynamic lubrication condition10.1016/j.ijfatigue.2010.09.021 ↗
33. A fatigue model for spur gear contacts operating under mixed elastohydrodynamic lubrication conditions10.1115/1.4005655 ↗
34. Investigation of Contact Performance of Case-Hardened Gears under Plasto-elastohydrodynamic Lubrication10.1007/s11249-019-1202-7 ↗
35. Gear contact fatigue prediction under mixed elastohydrodynamic lubrication with ellipsoidal asperity rough surface: experimental and numerical investigation
36. Multi-physics field coupling interface lubrication contact analysis for gear transmission under various finishing processes
37. Towards understanding the influencing mechanism of barrel finishing on tooth surface integrity and contact performance
38. Effect of shot peening-barrel finishing combined strengthening process on surface integrity and contact fatigue performance10.1016/j.engfailanal.2025.110056 ↗
39. Wear and subsurface stress evolution in tractive rolling contact
40. Study on gear contact fatigue failure competition mechanism considering tooth wear evolution10.1016/j.triboint.2020.106277 ↗
41. Peiran Y, Shizhu W. A generalized Reynolds equation for non-Newtonian thermal elastohydrodynamic lubrication; 1990.10.1115/1.2920308 ↗
42. A Computer #n of EHL and mixed lubrication characteristics, friction, subsurface stresses and flash temperatures based on measured 3-D surface roughness10.1080/10402000108982471 ↗
43. A parametric study on fatigue life for mixed elastohydrodynamic lubrication point contacts10.1115/1.4024303 ↗
44. Renger · 1985
45. A three-dimensional deterministic model for rough surface line-contact EHL problems
46. Fast Fourier transform based numerical methods for elasto-plastic contacts of nominally flat surfaces10.1115/1.2755158 ↗
47. Roelands · 1966
48. A numerical solution to the elasto-hydrodynamic problem10.1243/JMES_JOUR_1959_001_004_02 ↗
49. Viscosity, plasticity, and diffusion as examples of absolute reaction rates10.1063/1.1749836 ↗
50. Non-Newtonian thermal analyses of point EHL contacts using the Eyring model10.1115/1.1843161 ↗
51. Yang P, Wen S. The behavior of non-Newtonian thermal EHL film in line contacts at dynamic loads; 1992.10.1115/1.2920872 ↗
52. Effects of working conditions on TEHL performance of a helical gear pair with non-newtonian fluids10.1115/1.4026073 ↗
53. Huang · 2015
54. Thermoelastoplastic hydrodynamic lubrication contact analysis of three dimensional rough tooth surface considering micro-scale effect and thermal effect10.1016/j.triboint.2023.109134 ↗
55. Johnson · 1983
56. A new model for sphere asperity contact analysis considering strain hardening of materials10.1007/s11249-022-01668-2 ↗
57. The determination of yield strength from hardness measurements10.1007/BF02913433 ↗
58. The wear of metals under unlubricated conditions10.1098/rspa.1956.0144 ↗
59. An Investigation of the Impacts of Contact Parameters on Wear Coefficient10.1115/1.4027440 ↗
60. Lemaitre · 2006
61. Lubrication analysis and wear mechanism of heavily loaded herringbone gears with profile modifications in full film and mixed lubrication point contacts10.1016/j.wear.2021.203790 ↗
62. A theory for fatigue failure under multiaxial stress-strain conditions10.1243/PIME_PROC_1973_187_161_02 ↗
63. Kandil FA, Brown MW, Miller K. Biaxial low-cycle fatigue failure of 316 stainless steel at elevated temperatures. In: Mechanical behaviour and nuclear applications of stainless steel at elevated temperatures; 1982.
64. A path‐independent parameter for fatigue under proportional and non‐proportional loading10.1111/j.1460-2695.1993.tb00739.x ↗
65. Strain-controlled fatigue properties of steels and some simple approximations10.1016/S0142-1123(00)00026-8 ↗
66. Numerical model for bending fatigue life estimation of carburized spur gears with consideration of the adjacent tooth effect10.1016/j.ijfatigue.2021.106515 ↗
67. Estimation methods for fatigue properties of steels under axial and torsional loading10.1016/S0142-1123(01)00190-6 ↗
68. In situ running-in analysis of ground gears10.1016/j.wear.2016.01.021 ↗
69. Ai · 1993
70. The study of transition from elastohydrodynamic to mixed and boundary lubrication, the advancing frontier of engineering tribology
71. A simple deterministic plastoelastohydrodynamic lubrication (PEHL) model in mixed lubrication10.1016/j.triboint.2018.11.011 ↗
72. Three-dimensional surface roughness characterization and application10.3788/OPE.20182608.1994 ↗
73. Correlation between standard roughness parameters skewness and kurtosis and tribological behaviour of contact surfaces10.1016/j.triboint.2011.11.008 ↗
74. A new numerical simulation method of 3D rough surface topography with coupling 3D roughness parameters Sdr, Sdq, Spd, Spc, and characteristic functions10.1016/j.triboint.2024.110117 ↗
75. Wear resistance analysis of steel slag aggregates based on morphology characteristics
76. 3D measurements of lubricant and surface temperatures within an elastohydrodynamic contact10.1007/s11249-017-0953-2 ↗
77. The development of a spacer layer imaging method (SLIM) for mapping elastohydrodynamic contacts10.1080/10402009608983612 ↗
78. An energy-CP-combined model for predicting the fatigue life of polycrystalline materials under high cycle and very high cycle fatigue10.1016/j.engfracmech.2023.109564 ↗
79. Rolling contact fatigue performance of M50 steel: a combined experimental and analytical approach to determine life10.1016/j.ijfatigue.2023.107919 ↗
80. Thermal elastohydrodynamic analysis of circular contacts part 2: Non-Newtonian model10.1243/1350650011543592 ↗
81. Yang P. Numerical analysis of fluid lubrication. Beijing, China: National Defense Industry Press; 2019 (1998).
82. Thermal elastohydrodynamic analysis of circular contacts part 1: Newtonian model10.1243/1350650011543583 ↗
83. Sui P, Sadeghi F. Non-Newtonian thermal elastohydrodynamic lubrication; 1991.10.1115/1.2920634 ↗
84. Conduction of heat in solids10.1063/1.3057871 ↗