Effect of dendritic structure and secondary phases on the fatigue behavior of ERNiCrMo-3 weld metal
Source abstract
Abstract
The effect of dendritic structure and secondary phases on the fatigue crack propagation mechanism of ERNiCrMo-3 weld metal was investigated in the present study. Element segregation in the weld metal caused severe lattice distortion in the interdendritic region, which led to the instability of crack propagation rates, resulting in considerable differences in mechanical properties between the dendrite core and interdendritic region. The limited plastic deformation capability of the interdendritic region caused the contraction of the local plastic deformation zone at the crack tip, which increased stress concentration and accelerated crack propagation. Meanwhile, element segregation promoted the precipitation of a large number of Laves pahse in the interdendritic region. The interaction between dislocations and Laves phase was enhanced as the stress increased, which generated micro-voids and provided fast channels for fatigue crack propagation. Post-weld heat treatment weakened the non-uniformity of the microstructure and the fatigue crack showed a stable propagation trend. Moreover, the dissolution of Laves phase and the precipitation of γ” enhanced the fatigue property of the weld metal.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. A review on additive manufacturing processes of inconel 62510.1007/s11665-021-06427-3 ↗
2. Dissimilar welding of duplex stainless steel with Ni alloys: A review10.1016/j.ijpvp.2021.104439 ↗
3. A review on properties of Inconel 625 and Inconel 718 fabricated using direct energy deposition
4. Superior low cycle fatigue property from cell structures in additively manufactured 316L stainless steel10.1016/j.jmst.2021.10.006 ↗
5. Laves phases: a review of their functional and structural applications and an improved fundamental understanding of stability and properties10.1007/s10853-020-05509-2 ↗
6. Studies of standard heat treatment effects on microstructure and mechanical properties of laser net shape manufactured Inconel 71810.1007/s11661-009-9949-3 ↗
7. An overview on welding of Inconel 718 alloy-Effect of welding processes on microstructural evolution and mechanical properties of joints10.1016/j.matchar.2021.110997 ↗
8. Effect of solutionizing and double ageing treatments on the microstructural characteristics and tensile properties of Inconel 718 welds10.1016/j.jmrt.2023.09.016 ↗
9. Foreseeing metal failure from its inception10.1126/science.add8259 ↗
10. Hobbacher · 2016
11. Synthetical effect of material inhomogeneity and welding defects on fatigue behavior of 2205 duplex stainless steel cruciform welded Joints: Experiments and Life-prediction model10.1016/j.ijfatigue.2022.107472 ↗
12. High temperature fatigue of friction welded joints in dissimilar nickel based superalloys10.1179/174328407X243933 ↗
13. Zhang H, Li L, Ma W et al. Effects of welding residual stresses on fatigue reliability assessment of a PC beam bridge with corrugated steel webs under dynamic vehicle loading, pp. 1561-1572.10.1016/j.istruc.2022.09.094 ↗
14. Role of misorientation in fatigue crack growth behavior for NG-TIG welded joint of Ni-based alloy10.1016/j.msea.2017.10.090 ↗
15. Characterization of welded joints of dissimilar nickel-based superalloys by electron beam and rotary friction welding10.1007/s11665-022-06958-3 ↗
16. Fatigue crack growth mechanism of Ni-based weld metal in a 9% Ni steel joint10.1016/j.msea.2021.142485 ↗
17. Influence of overloads on dwell time fatigue crack growth in Inconel 71810.1016/j.msea.2014.06.068 ↗
18. Effects of compressive residual stress on short fatigue crack growth in a nickel-based superalloy10.1016/j.ijfatigue.2017.11.010 ↗
19. Crack closure under high load-ratio conditions for Inconel-718 near threshold behavior10.1016/j.engfracmech.2008.09.009 ↗
20. Long fatigue crack propagation behavior of laser powder bed-fused inconel 625 with intentionally-seeded porosity10.1016/j.ijfatigue.2019.06.008 ↗
21. Role of dissimilar Ni-based ERNiCrMo-3 filler on the microstructure, mechanical properties and weld induced residual stresses of the ferritic/martensitic P91 steel welds joint
22. Microstructural evolution and mechanical properties of Inconel 625 alloy during pulsed plasma arc deposition process10.1016/j.jmst.2013.02.010 ↗
23. Microstructure and mechanical properties of Inconel 625 fabricated by wire-arc additive manufacturing10.1016/j.surfcoat.2019.05.079 ↗
24. The effect of post-weld heat treatment temperature on the microstructure of Inconel 625 deposited metal10.1016/j.jallcom.2013.12.224 ↗
25. Microstructure and hardness evolution of ERNiCrMo-3 deposited metal during aging at 750 °C10.1007/s10853-021-06769-2 ↗
26. Effect of heat-treatment on microstructural evolution and mechanical behaviour of severely deformed Inconel 71810.1016/j.msea.2018.01.007 ↗
27. Low cycle fatigue behavior of wire arc additive manufactured and solution annealed 308 L stainless steel
28. A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application10.1016/j.jmapro.2020.08.019 ↗
29. Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review10.1016/j.pmatsci.2020.100724 ↗
30. Correlation between solidification parameters and weld microstructures10.1179/imr.1989.34.1.213 ↗
31. Effects of heat treatment on microstructure and mechanical properties of Inconel 625 alloy fabricated by wire arc additive manufacturing process10.1016/S1003-6326(20)65439-5 ↗
32. The influence of the post-weld heat treatment on the microstructure of Inconel 625/carbon steel bimetal joint obtained by explosive welding10.3390/met9020246 ↗
33. Fracture behavior of Alloy 625 with different precipitate microstructures10.1016/j.msea.2013.03.021 ↗
34. Effect of grain boundary precipitation on the mechanical integrity of EBW joints of Inconel 62510.1016/j.msea.2021.140926 ↗
35. Precipitation behavior of grain boundary M23C6 and its effect on tensile properties of Ni–Cr–W based superalloy10.1016/j.msea.2012.03.092 ↗
36. Fatigue inhomogeneity of 140 mm thick TC4 titanium alloy double-sided electron beam welded joints
37. A critical plane approach to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
38. Effect of surface roughness on step-wise S-N characteristics in high strength steel10.1016/S0142-1123(02)00166-4 ↗
39. Effect of weld reinforcement on tensile and fatigue properties of 5083 aluminum metal inert gas (MIG) welded joint: Experiments and numerical simulations10.1016/j.ijfatigue.2020.106046 ↗
40. The smooth and notched three-point bending fatigue behavior of directionally solidified high-Nb TiAl alloy10.1016/j.matchar.2021.111444 ↗
41. Rice JR. A path independent integral and the approximate analysis of strain concentration by notches and cracks; 1968.10.21236/AD0653716 ↗
42. Effects of alloy elements (Mg, Zn) on the microstructure and mechanical properties of (TiC+ TiB2)/Al composites10.1016/j.ceramint.2022.04.201 ↗
43. Stored energy density research on the fatigue crack initiation at twin boundary and life prediction of Inconel718 superalloy
44. The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 71810.1016/j.msea.2017.03.098 ↗
45. Assessment of the effect of isolated porosity defects on the fatigue performance of additive manufactured titanium alloy
46. Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing10.1016/j.matdes.2017.03.004 ↗
47. Fatigue crack growth in a material with coarse brittle phases10.1016/j.ijfatigue.2019.105332 ↗
48. Study on high temperature creep behavior of the accident-resistant cladding Fe–13Cr–4Al-1.85 Mo-0.85 Nb alloy10.1016/j.msea.2020.140688 ↗
49. Enhanced mechanical properties of as-cast rare earth bearing magnesium alloy via elevated-temperature homogenization
50. Enhancing mechanical properties and corrosion resistance of nickel-aluminum bronze via hot rolling process10.1016/j.jmst.2020.05.024 ↗
51. Phase composition and fatigue crack growth behavior of Inconel 718 under additive manufacturing10.1016/j.msea.2022.143595 ↗
52. Microstructure and fatigue crack growth behavior of Inconel 718 superalloy manufactured by laser directed energy deposition