Effects of shot peening on improving high-temperature fretting fatigue performance of nickel-based single crystal superalloy tenon attachment
Source abstract
Abstract
In order to reveal the shot peening (SP) strengthening mechanism on the high-temperature fretting fatigue performance of nickel-based single crystal (NBSC) tenon attachment, fretting fatigue tests under three load conditions were carried out at 600 ℃. The results showed that the fretting fatigue life of SP NBSC tenon attachment could be increased to 357.53 % of that of non-SP NBSC tenon attachment. SP changed the fretting fatigue crack initiation site from the contact surface to the subsurface. The larger the peak load was, the closer the crack initiation site was to the contact surface. SP changed the fretting fatigue crack propagation path, and the crack propagation deviated from the original direction approximately perpendicular to the contact surface. SP increased the microhardness by 28.1 %, induced −1098 MPa maximum compressive residual stress (CRS) and generated a mean geometrically necessary dislocation (GND) density of 7.55× 10 14 m −2 near the surface. The micro convex bodies and greater microhardness alleviated the wear damage, and the increased dislocation density and CRS enhanced the inhibition of crack initiation and propagation, which were the strengthening mechanism of SP to improve the fretting fatigue performance of NBSC tenon. This work aimed to provide support for the long-life manufacturing of NBSC turbine blades.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Metal Alloys Wear and Properties · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Tensile behavior of nickel-base single-crystal superalloy DD610.1016/j.msea.2015.03.125 ↗
2. Creep behaviour of Ni-base single-crystal superalloys with various γ′ volume fraction10.1016/j.actamat.2004.04.028 ↗
3. Fretting Stresses in Single Crystal Superalloy Turbine Blade Attachments10.1115/1.1308032 ↗
4. Damage mechanisms during very high cycle fatigue of a coated and grit-blasted Ni-based single-crystal superalloy10.1016/j.ijfatigue.2020.105962 ↗
5. Experimental and numerical investigation on crack initiation of fretting fatigue of dovetail10.1111/ffe.12787 ↗
6. Failure analysis of a third stage gas turbine blade10.1016/j.engfailanal.2010.09.017 ↗
7. An investigation of fretting fatigue in a circular arc dovetail assembly10.1016/j.ijfatigue.2015.07.025 ↗
8. Effects of Shot-Peening on Fretting Fatigue Crack Growth Behavior in Ti-6Al-4V10.1111/j.1475-1305.2008.00591.x ↗
9. Residual stress field induced by shot peening based on random-shots for 7075 aluminum alloy10.1016/S1003-6326(12)61717-8 ↗
10. Influence of plasma molybdenizing and shot-peening on fretting damage behavior of titanium alloy10.1016/j.apsusc.2016.08.146 ↗
11. An investigation into the effect of elevated temperatures on fretting fatigue response under cyclic normal contact loading10.1016/j.tafmec.2017.07.018 ↗
12. Experimental study of fretting fatigue in dovetail assembly considering temperature effect based on damage mechanics method10.1016/j.engfailanal.2021.105812 ↗
13. A fracture mechanics based approach for the fretting fatigue of aircraft engine fan dovetail attachments10.1016/j.ijfatigue.2019.105213 ↗
14. Effects of slip on fretting behavior: experiments and analyses10.1016/S0043-1648(03)00510-6 ↗
15. The effect of crystal orientation on fretting fatigue crack formation in Ni-based single-crystal superalloys: in-situ SEM observation and crystal plasticity finite element simulation10.1016/j.triboint.2018.01.011 ↗
16. Operando spectroscopic analysis of an amorphous cobalt sulfide hydrogen evolution electrocatalyst10.1021/jacs.5b03545 ↗
17. Effects of secondary orientation and temperature on the fretting fatigue behaviors of Ni-based single crystal superalloys10.1016/j.triboint.2018.09.006 ↗
18. Prediction of fretting crack location and orientation in a single crystal nickel alloy10.1016/j.mechmat.2009.04.002 ↗
19. Ultrasonic fatigue of a single crystal Ni-base superalloy at 1000°C10.1016/j.msea.2006.08.028 ↗
20. Fretting fatigue of single crystal/polycrystalline nickel subjected to blade/disk contact loading10.1016/j.actaastro.2004.11.007 ↗
21. Fretting on the cubic face of a single-crystal Ni-base superalloy at room temperature10.1016/j.triboint.2008.12.003 ↗
22. In-situ observation and finite element analysis of fretting fatigue crack propagation behavior in 1045 steel10.1016/j.cja.2020.10.024 ↗
23. Fretting fatigue damage mechanism of Nickel-based single crystal superalloys at high temperature10.1016/j.ijmecsci.2020.105894 ↗
24. Fretting fatigue failure behavior of Nickel-based single crystal superalloy dovetail specimen in contact with powder metallurgy pads at high temperature10.1016/j.triboint.2019.105986 ↗
25. Experimental and numerical investigation on fretting fatigue behavior of Nickel-based single crystal superalloy at high temperature10.1016/j.mechmat.2020.103595 ↗
26. Improving high temperature fretting fatigue performance of nickel-based single crystal superalloy by shot peening10.1016/j.ijfatigue.2023.107563 ↗
27. Effects of Shot peening on fretting fatigue crack initiation behavior10.3390/ma12050743 ↗
28. Investigation on the fretting fatigue behaviors of Ti-6Al-4V dovetail joint specimens treated with shot-peening10.1016/j.wear.2016.12.004 ↗
29. Microstructure and residual stress modulation of 7075 aluminum alloy for improving fatigue performance by laser shock peening10.1016/j.ijmachtools.2022.103979 ↗
30. Twin and dislocation induced grain subdivision and strengthening in laser shock peened Ti10.1016/j.ijplas.2022.103476 ↗
31. Fatigue strength improvement in Ti-6Al-4V subjected to foreign object damage by combined treatment of laser shock peening and shot peening10.1016/j.ijfatigue.2021.106581 ↗
32. Two laser beam modulation of microstructure and residual stress field in cold sprayed Al alloy for recovering fatigue performance10.1016/j.ijplas.2023.103598 ↗
33. Designing a gradient structure in a Ni-based superalloy to improve fretting fatigue resistance at elevated temperatures through an ultrasonic surface rolling process10.1016/j.ijfatigue.2022.107397 ↗
34. The effect of ultrasonic surface rolling process on the fretting fatigue property of GH4169 superalloy10.1016/j.ijfatigue.2019.105373 ↗
35. Effect of shot-peening on the fretting wear and crack initiation behavior of Ti-6Al-4V dovetail joint specimens10.1016/j.ijfatigue.2017.10.020 ↗
36. On the effect of shot-peening on fretting fatigue of Al7075-T6 under cyclic normal contact loading10.1016/j.surfcoat.2017.08.067 ↗
37. Experimental investigation on surface integrity and fatigue of nickel-based single-crystal superalloy DD6 during grinding-shot peening composite manufacturing10.1007/s00170-023-10860-0 ↗
38. An arc-tenon attachment for nickel-based single crystal turbine blade with improved high-temperature fretting fatigue performance10.1016/j.ijfatigue.2023.108004 ↗
39. Effect of Shot Peening parameters on Fretting Fatigue Lifetime
40. Surface characterization and fatigue evaluation in GH4169 superalloy : comparing results after finish turning; shot peening and surface polishing treatments10.1016/j.ijfatigue.2018.04.009 ↗
41. Influence of residual stresses on the fatigue life of a shot-peened nickel-based single crystal superalloy: from measurements to modeling, in
42. Effect of Shot Peening on the Surface Integrity and Notched Fatigue Properties of a Single-crystal Superalloy at Elevated Temperature10.1016/S1875-5372(18)30148-6 ↗
43. C.A. Rodopoulos S.A. Curtis E.R. de los Rios, J. SolisRomero, Optimisation of the fatigue resistance of 2024–T351 aluminium alloys by controlled shot peening—methodology, results and analysis Int J Fatigue 26 2004 849 856.10.1016/j.ijfatigue.2004.01.003 ↗
44. Study on the fretting wear performance and mechanism of GH4169 superalloy after various laser shock peening treatments10.1016/j.optlastec.2023.110301 ↗
45. Suitability of laser shock peening to impact-sliding wear in different system stiffnesses10.1016/j.surfcoat.2018.11.007 ↗
46. Residual stress determination in a shot-peened nickel-based single-crystal superalloy using X-ray diffraction10.1107/S1600576715017689 ↗
47. Indentation method to measure the residual stress induced by ion implantation
48. Characterization of distribution of residual stress in shot-peened layer of nickel-based single crystal superalloy DD6 by nanoindentation technique10.1016/j.mechmat.2021.104143 ↗
49. Foreign object damage characteristics of a thin nickel-based superalloy plate at room and high temperatures10.1016/j.tws.2024.112065 ↗
50. C. Moussa M. Bernacki R. Besnard N. Bozzolo About quantitative EBSD analysis of deformation and recovery substructures in pure Tantalum IOP Conference Series: Materials Science and Engineering 89 2015.10.1088/1757-899X/89/1/012038 ↗
51. An investigation of high and room temperature fretting fatigue of DD6-FGH96 dovetail joint in aero-engine: experimental and numerical analysis10.1016/j.ijfatigue.2021.106537 ↗
52. Unveiling contribution of overload-induced residual stress to fatigue retardation pertinent to crack closure and stress intensity10.1016/j.msea.2021.142268 ↗
53. Fracture mechanics analysis for residual stress and crack closure corrections10.1016/j.ijfatigue.2006.07.002 ↗
54. Improving plain and fretting fatigue resistance of A100 steel using ultrasonic nanocrystal surface modification10.1016/j.ijfatigue.2021.106204 ↗
55. Fretting fatigue mechanism of 40CrNiMoA steel subjected to the ultrasonic surface rolling process: the role of the gradient structure10.1016/j.ijfatigue.2022.107383 ↗
56. Z. Qin B. Li H. Zhang T. Youani Andre Wilfried, T. Gao, H. Xue, Effects of shot peening with different coverage on surface integrity and fatigue crack growth properties of 7B50-T7751 aluminum alloy Eng Fail Anal 133 2022 106010.10.1016/j.engfailanal.2021.106010 ↗
57. Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer10.1016/j.actamat.2014.12.057 ↗
58. Tribological Behavior of a Shot-Peened Nickel-Based Single Crystal Superalloy at High Temperature10.1007/s11249-022-01637-9 ↗
59. Temperature effects on deformation substructures and mechanisms of a Ni-based single crystal superalloy
60. Recent developments in the application of surface mechanical attrition treatments for improved gradient structures: processing parameters and surface reactivity10.2320/matertrans.MF201929 ↗
61. Microstructure-mechanical property correlation in shot peened and vibro-peened Ni-based superalloy10.1016/j.jmatprotec.2018.12.007 ↗
62. Surface nano-hardness and microstructure of a single crystal nickel base superalloy after laser shock peening10.1016/j.optlastec.2016.12.032 ↗
63. Surface characteristics and microstructure evolution of a nickel-base single crystal superalloy treated by ultrasonic shot peening10.1016/j.jallcom.2022.165761 ↗
64. An investigation of fretting fatigue behavior and mechanism in 17–4PH stainless steel with gradient structure produced by an ultrasonic surface rolling process10.1016/j.ijfatigue.2019.105340 ↗