Influence of the defect size, type, and position on the High Cycle Fatigue behavior of Ti-6Al-4V processed by laser powder bed fusion
Source abstract
Abstract
The present paper analyzes separately the effect of the features of the typical AM defects on the fatigue resistance of Ti-6Al-4V alloy. To do so, different defect population in terms of sizes and morphologies were obtained by varying the L-PBF process parameters. The distance of these defects with respect to the surface was also controlled. A uniaxial fatigue testing campaign (R = −1) has then been conducted. The results have showed great influence of the nature of the defect population on the fatigue strength of Ti-6Al-4V alloy, for the case of surface crack initiation. The results have also allowed to quantify the criticality of internal defects with respect to their sizes and showed that the defect morphology has no influence on the fatigue strength for the case of internal crack initiation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
2. Defect formation mechanisms in selective laser melting: a review10.1007/s10033-017-0121-5 ↗
3. Process defects and In-situ monitoring methods in metal powder bed fusion: a review10.1088/1361-6501/aa5c4f ↗
4. Interpretation of the fatigue anisotropy of additively manufactured TA6V alloys via a fracture mechanics approach10.1016/j.engfracmech.2019.03.048 ↗
5. High Cycle Fatigue (HCF) performance of Ti-6Al-4V alloy processed by selective laser melting10.4028/www.scientific.net/AMR.816-817.134 ↗
6. High-cycle fatigue behavior of a laser powder bed fusion additive manufactured Ti-6Al-4V titanium: Effect of pores and tested volume size10.1016/j.ijfatigue.2021.106206 ↗
7. Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime10.1016/j.ijfatigue.2016.05.018 ↗
8. Fatigue behaviour of additively manufactured Ti-6Al-4V alloy: The role of defects on scatter and statistical size effect10.1016/j.ijfatigue.2020.105811 ↗
9. Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review10.1016/j.pmatsci.2020.100724 ↗
10. Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel10.1016/j.ijfatigue.2016.03.014 ↗
11. Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights10.1016/j.matdes.2019.108385 ↗
12. Analysis of the effect of internal defects on fatigue performance of additive manufactured metals10.1016/j.msea.2020.139385 ↗
13. Numerical modelling of surface roughness effect on the fatigue behavior of Ti-6Al-4V obtained by additive manufacturing10.1016/j.ijfatigue.2019.02.014 ↗
14. Towards a fundamental understanding of the effects of surface conditions on fatigue resistance for safety-critical AM applications10.1016/j.ijfatigue.2020.105585 ↗
15. Murakami · 2002
16. Effects of defects, inclusions and inhomogeneities on fatigue strength10.1016/0142-1123(94)90001-9 ↗
17. Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting10.1016/j.ijfatigue.2018.08.002 ↗
18. Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect10.1016/j.ijfatigue.2017.03.044 ↗
19. Internal fatigue crack propagation in a Ti-6Al-4V alloy: An in situ study10.1016/j.ijfatigue.2022.107450 ↗
20. Environment effect on internal fatigue crack propagation studied with in-situ X-ray microtomography10.1016/j.msea.2023.145462 ↗
21. Assessment of the effect of isolated porosity defects on the fatigue performance of additive manufactured titanium alloy
22. Fatigue characterization of titanium Ti-6Al-4V samples produced by additive manufacturing10.1016/j.prostr.2016.06.395 ↗
23. Effects of small defects and nonmetallic inclusions on the fatigue strength of metals
24. Near-threshold fatigue propagation of physically short and long cracks in Titanium alloy10.1016/j.prostr.2016.06.122 ↗
25. Simulation of the Kitagawa-Takahashi diagram using a probabilistic approach for cast Al-Si alloys under different multiaxial loads10.1016/j.ijfatigue.2016.08.014 ↗
26. Effects of small defects on fatigue strength of metals10.1016/0142-1123(80)90024-9 ↗
27. Quantitative evaluation of fatigue strength of metals containing various small defects or cracks10.1016/0013-7944(83)90018-8 ↗
28. Quantitative evaluation of effects of shape and size of artificially introduced alumina particles on the fatigue strength of 1.5NiCrMo (En24) steel10.1016/0142-1123(91)90485-H ↗
29. Fatigue from defect: influence of size, type, position, morphology and loading10.1016/j.ijfatigue.2021.106531 ↗
30. Influence of the position and size of various deterministic defects on the high cycle fatigue resistance of a 316L steel manufactured by laser powder bed fusion10.1016/j.ijfatigue.2020.105930 ↗
31. Investigation of the sensitivity of the fatigue resistance to defect position in aluminium alloys obtained by Selective laser melting using artificial defects10.1016/j.ijfatigue.2020.105505 ↗
32. Microstructure and mechanical properties of Ti-6Al-4V manufactured by selective laser melting after stress relieving, hot isostatic pressing treatment, and post-heat treatment10.1007/s11665-021-05753-w ↗
33. Laser powder bed fusion produced Ti-6Al-4V: Influence of high-energy process parameters on in-situ martensite decomposition and prior beta grain texture10.1016/j.jallcom.2022.165497 ↗
34. “TA6V. Aubert&Duval Site. Accessed: May 07, 2022. [Online]. Available: https://www.aubertduval.com/alloy/754/.
35. Volume, shape, and roundness of rock particles10.1086/623964 ↗
36. On the use of critical distance theories for the prediction of the high cycle fatigue limit stress in notched Ti–6Al–4V10.1016/j.ijfatigue.2004.06.002 ↗
37. Experimental investigation of the size effect in high cycle fatigue: Role of the defect population in cast aluminium alloys10.1016/j.ijfatigue.2019.105222 ↗
38. Fatigue crack growth behavior of laser powder bed fusion additive manufactured Ti-6Al-4V: Roles of post heat treatment and build orientation
39. Environmentally-assisted fatigue crack growth mechanisms in advanced materials for aerospace applications10.1016/j.ijfatigue.2007.03.014 ↗
40. Effects of vacuum environment on small fatigue crack propagation in Ti-6Al-4V10.1016/j.ijfatigue.2016.05.024 ↗
41. Tada H, Paris PC, Irwin GR. The stress analysis of cracks handbook; 2000.10.1115/1.801535 ↗