Fatigue crack characterisation in 2024-T351 aluminium alloy through SEM observation combined with the CJP model
Source abstract
Abstract
This work characterises crack growth in AA2024-T315 by combining different methods to further increase the reliability of the results. The Christopher-James-Patterson (CJP) model was fitted to experimental data obtained by digital image correlation (DIC). The effective value of the CJP stress intensity factors were successfully correlated with the ΔK-da/dN curve as obtained with Scanning Electron Microscopy measurements of the depth of striations on the fracture surface. This approach based on fitting the CJP model with DIC data and SEM observations allowed estimation of opening and closure loads and allowed the propagation rate and fracture mode to be effectively characterised.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Non-Destructive Testing Techniques · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Callister · 2007
2. Some unresolved issues with fatigue crack closure - measurement, mechanisms and interpretation problems, Advances in Fracture Research
3. Methods for crack opening load and crack tip shielding determination: A review10.1046/j.1460-2695.2003.00691.x ↗
4. A Critical Analysis of Crack Propagation Laws10.1115/1.3656900 ↗
5. The Effect of Stress Ratio During Crack Propagation and Fatigue for 2024–T3 and 7075–T6 Aluminum. Eff Environ Complex Load Hist Fatigue Life, STP 462
6. Numerical Analysis of Crack Propagation in Cyclic-Loaded Structures10.1115/1.3609637 ↗
7. Fatigue crack growth modelling based on CTOD for the 7050–T6 alloy10.1111/ffe.12582 ↗
8. Muskhelishvili · 1977
9. Comparativa de modelos para el cálculo experimental del factor de intensificación de tensiones empleando técnicas ópticas de campo completo
10. Crack tip shielding from a plastic “inclusion”10.4028/www.scientific.net/KEM.465.1 ↗
11. Experimental evaluation of shielding effect on growing fatigue cracks under overloads using ESPI10.1016/j.ijfatigue.2015.10.003 ↗
12. Characterisation of fatigue crack growth using the CJP model of crack tip fields or plastic CTOD10.1016/j.prostr.2020.01.154 ↗
13. Experimental evaluation of plasticity-induced crack shielding from isochromatic data10.1117/1.OE.54.8.081203 ↗
14. Characterisation of fatigue crack growth using digital image correlation measurements of plastic CTOD10.1016/j.tafmec.2019.03.009 ↗
15. Fatigue Fracture, Some Results Derived from the Microscopic Examination of Crack Surfaces10.1108/eb033233 ↗
16. Effect of density on tensile strength, fracture toughness, and fatigue crack propagation behaviour of sintered steel10.1179/pom.1981.24.3.121 ↗
17. Hertzberg · Crack closure and fatigue striations in 2024–T3 aluminum alloy · 1973 · 4 · 887
18. Experimental study of the effect of loading conditionon fracture surface contact features and crackclosure behavior in a carbon steel10.1016/j.engfracmech.2006.01.001 ↗
19. Fatigue crack growth in 2024–T351 friction stir welded joints: Longitudinal residual stress and microstructural effects10.1016/j.ijfatigue.2008.05.004 ↗
20. An experimental study on crack closure induced by laser peening in pre-cracked aluminum alloy 2024–T351 and fatigue life extension10.1016/j.ijfatigue.2019.105232 ↗
21. Local crack plasticity and its influences on the global elastic stress field10.1016/j.ijfatigue.2012.04.015 ↗
22. Fatigue Crack Closure Under Cyclic Tension10.1016/0013-7944(70)90028-7 ↗
23. Behavior of plasticity-induced crack closure and roughness-induced crack closure in aluminum alloy10.1016/S0142-1123(01)00155-4 ↗
24. Oxide-Induced Crack Closure: An Explanation for Near-Threshold Corrosion Fatigue Crack Growth Behavior10.1007/BF02643688 ↗
25. Analysis of the effects of controlled shot peening on fatigue damage of high strength aluminium alloys10.1016/S0142-1123(02)00049-X ↗
26. Newman J. A Finite-Element Analysis of Fatigue Crack Closure. Mech. Crack Growth, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International; n.d., p. 281-281–21.
27. A fatigue crack closure mechanism in titanium10.1111/j.1460-2695.1979.tb00372.x ↗
28. de Koning A. A Simple Crack Closure Model for Prediction of Fatigue Crack Growth Rates Under Variable-Amplitude Loading. Fract. Mech., 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International; n.d., p. 63-63–23.
29. Zhang P, Xie L qi, Zhou C yu, Li J, He X hua. Two new models of fatigue crack growth rate based on driving force parameter and crack closure method at negative load ratios. Theor Appl Fract Mech 2019;103.10.1016/j.tafmec.2019.102315 ↗
30. ASM Metals Handbook - Properties and selection nonferrous alloys and special purpose- Volume 2. 1996.
31. Nanostructure of aluminium alloy 2024: Segregation, clustering and precipitation processes10.1016/j.actamat.2010.11.033 ↗
32. Experimental evaluation of plasticity induced crack shielding effect using full-field optical techniques for stress and strain measurement PhD student
33. A general method for determining mixed-mode stress intensity factors from isochromatic fringe patterns10.1016/0013-7944(79)90123-1 ↗
34. Experimental methodology for the quantification of crack tip plastic zone and shape from the analysis of displacement fields10.3221/IGF-ESIS.41.23 ↗
35. ImageJ n.d. https://imagej.nih.gov/ij/ (accessed July 1, 2021).
36. ASTM-E1820: Standard Test Method for Measurement of Fracture Toughness 2001:1–46.
37. Experimental Investigation and Finite Element Analysis on Fatigue Behavior of Aluminum Alloy 7050 Single-Lap Joints10.1007/s11665-018-3137-9 ↗
38. Improvement of ASTM compliance offset method for precise determination of crack opening load10.1016/j.ijfatigue.2008.11.006 ↗
39. Experimental evaluation of crack shielding during fatigue crack growth using digital image correlation10.1111/ffe.12136 ↗
40. An experimental study on the opening and closure behaviour of fatigue surface, corner and through-thickness cracks at notches10.1111/j.1460-2695.1994.tb00222.x ↗
41. Fatigue crack closure determination by means of finite element analysis10.1016/j.engfracmech.2007.02.020 ↗
42. Crack opening and closure in fatigue10.1016/0013-7944(85)90021-9 ↗
43. A micromechanical model for small fatigue crack growth: An approach based on two threshold conditions10.1111/j.1460-2695.2009.01355.x ↗
44. Everitt · 2003
45. Kumar A, Murthy ARC, R.Iyer N. A Study of the Stress Ratio Effects on Fatigue Crack Growth using LOWESS Regression. Int Conf Adv Civil, Struct Andm Eng 2013:47–51.
46. A more effective rationalisation of fatigue crack growth rate data for various specimen geometries and stress ratios using the CJP model10.1016/j.ijfatigue.2018.05.027 ↗
47. Numerical analysis of plasticity induced crack closure based on an irreversible cohesive zone model10.1016/j.tafmec.2017.01.006 ↗
48. Fatigue crack propagation analysis in 2024–T351 aluminium alloy using nonlinear parameters10.1016/j.ijfatigue.2021.106478 ↗
49. Fatigue crack growth and crack closure in an AIMgSi alloy10.1046/j.1460-2695.2001.00383.x ↗
50. Fatigue crack growth in thin aluminium alloy sheets under loading sequences with periodic overloads10.1016/j.tws.2004.11.001 ↗
51. Towards a new model of crack tip stress fields10.1007/s10704-008-9209-3 ↗