Fatigue of wire arc additively manufactured components made of unalloyed S355 steel
Source abstract
Abstract
Today, wire arc additive manufacturing (WAAM) can be used to fabricate critical structural steel components. The process allows to fabricate sophisticated shapes, thereby achieving very high levels of material capacity utilization. Key welding parameters inevitably influence the mechanical resistance of components made by WAAM, submitted to static or cyclic loading. In this research, the fatigue behaviour of wire arc additively manufactured carbon steel elements is investigated. Firstly, samples are manufactured by cold metal transfer (CMT) welding process using carbon steel 3Dprint AM 35 (S355) grade and following a welding procedure optimised to limit the welding-induced imperfections. A series of microstructural investigations and mechanical experiments are carried out on milled samples including: (i) hardness tests, (ii) static tensile tests, and (iii) cyclic fatigue tests. Both transverse and longitudinal directions are tested. The obtained fatigue test results are then compared against existing research on equivalent details. A database containing all similar test results and own experimental results is then used to calculate the fatigue detail categories, and to assess the applicability of the current Eurocode and IIW provisions for fatigue. The reliability levels of the proposed fatigue classes are then validated through the use of Weibull models, commonly used in survival analysis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (96)
Show source-provided references
1. New opportunities to optimize structural designs in metal by using additive Manufacturing
2. Metal additive manufacturing in structural engineering – review, advances, opportunities and outlook10.1016/j.istruc.2022.12.039 ↗
3. Low cost integration of additive and subtractive processes for hybrid layered manufacturing10.1016/j.rcim.2010.03.008 ↗
4. Experimental investigations into rapid prototyping of composites by novel hybrid deposition process10.1016/j.jmatprotec.2005.06.062 ↗
5. Additive Manufacturing using MIG welding
6. Baker R. Method of making decorative articles 1920:300.
7. Toward a smart wire arc additive manufacturing system: a review on current developments and a framework of digital twin10.1016/j.jmsy.2023.01.012 ↗
8. Microstructural evolution and mechanical properties of maraging steel produced by wire + arc additive manufacture process10.1016/j.matchar.2017.12.002 ↗
9. Microstructure and mechanical properties of wire + arc additively Manufactured 2050 Al–Li Alloy Wall deposits
10. Fatigue crack growth anisotropy, texture and residual stress in austenitic steel made by wire and arc additive manufacturing10.1016/j.msea.2018.03.075 ↗
11. Improvement of microstructure and mechanical properties in wire + arc additively Manufactured ti-6Al-4V with machine Hammer peening10.1016/j.proeng.2018.02.083 ↗
12. Characterising and representing small crack growth in an additive manufactured titanium alloy10.1016/j.engfracmech.2021.107876 ↗
13. Fatigue behavior of austenitic stainless steel 347 fabricated via wire arc additive Manufacturing10.1007/s11665-021-06033-3 ↗
14. A probabilistic approach for high cycle fatigue of wire and arc additive Manufactured parts taking into account process-induced pores
15. Uniaxial and multiaxial fatigue behaviour of wire arc additively manufactured ER70S-6 low carbon steel components10.1016/j.ijfatigue.2022.107283 ↗
16. Wire plus arc additive manufactured functional steel surfaces enhanced by rolling
17. Fatigue testing and analysis of steel plates manufactured by wire-arc directed energy deposition
18. On the origin of microstructural banding in ti-6Al4V wire-arc based high deposition rate additive manufacturing10.1016/j.actamat.2018.12.038 ↗
19. Correlation between arc mode, microstructure, and mechanical properties during wire arc additive manufacturing of 316L stainless steel10.1016/j.msea.2019.02.078 ↗
20. Effect of ti-based inclusions and acicular ferrite on the corrosion performance of multipass weld metals10.1016/j.matchemphys.2014.03.006 ↗
21. Fatigue crack propagation behaviour in wire+arc additive manufactured ti-6Al-4V: effects of microstructure and residual stress10.1016/j.matdes.2015.10.141 ↗
22. Fracture toughness and fatigue crack growth rate properties in wire + arc additive manufactured ti-6Al-4V10.1111/ffe.12547 ↗
23. Wire arc additive manufacturing: a brief review on advancements in addressing industrial challenges incurred with processing metallic alloys10.1016/j.matpr.2021.09.329 ↗
24. Jin W, Zhang C, Jin S, Tian Y, Wellmann D, Liu W. Wire Arc Additive Manufacturing of Stainless Steels: A Review. Applied Sciences 2020, Vol 10, Page 1563 2020;10:1563. Doi: 10.3390/APP10051563.10.3390/app10051563 ↗
25. Current status and perspectives on wire and arc additive Manufacturing (WAAM)
26. Bending fatigue properties of structural steel fabricated through wire arc additive manufacturing (WAAM)10.1016/j.jestch.2022.101247 ↗
27. Ron T, Levy GK, Dolev O, Leon A, Shirizly A, Aghion E. The Effect of Microstructural Imperfections on Corrosion Fatigue of Additively Manufactured ER70S-6 Alloy Produced by Wire Arc Deposition. Metals 2020, Vol 10, Page 98 2020;10:98. Doi: 10.3390/MET10010098.10.3390/met10010098 ↗
28. Mechanical testing and microstructural analysis of wire arc additively manufactured steels10.1016/j.matdes.2022.110544 ↗
29. Fatigue crack growth behaviour of wire and arc additively manufactured ER70S-6 low carbon steel components10.1007/s10704-021-00545-8 ↗
30. Fatigue crack growth behaviour of wire arc additively manufactured steels10.1016/j.ijfatigue.2023.107705 ↗
31. Low cycle fatigue behaviour of wire arc additively manufactured ER70S-6 steel10.1016/j.ijfatigue.2023.107910 ↗
32. Unraveling the failure mechanism of wire arc additive manufactured low carbon steel under tensile and high cycle fatigue loading10.1016/j.engfailanal.2023.107347 ↗
33. Investigation of mechanical and fracture properties of wire and arc additively manufactured low carbon steel components10.1016/j.tafmec.2020.102685 ↗
34. Hobbacher · 2016
35. EN 1993-1-9. European Committee for Standardization, 2005. EN 1993-1-9, Eurocode 9: Design of steel structures - Part 1-9: Fatigue. CEN, Brussels.: 2005.
36. Uyen TMT, Minh PS, Nguyen VT, Do TT, Nguyen VT, Le MT, et al. Trajectory Strategy Effects on the Material Characteristics in the WAAM Technique. Micromachines 2023, Vol 14, Page 827 2023;14:827. Doi: 10.3390/MI14040827.10.3390/mi14040827 ↗
37. Development and implementation of a software for wire arc additive manufacturing preprocessing planning: trajectory planning and machine code generation10.1007/s40194-021-01233-w ↗
38. A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures10.1016/j.rcim.2015.01.003 ↗
39. Effect of deposition strategies on fatigue crack growth behaviour of wire + arc additive manufactured titanium alloy Ti–6Al–4V10.1016/j.msea.2021.141194 ↗
40. EN ISO 6892-1. EN ISO 6892-1:2019 - Metallic materials — Tensile testing — Part 1: Method of test at room temperature 2019. https://www.iso.org/standard/78322.html (accessed October 30, 2023).
41. ASTM E466-21. ASTM E466-21 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials 2021. https://www.astm.org/e0466-21.html (accessed October 30, 2023).
42. Refractories · 2000 · 1
43. Porter · 2009
44. Avner · 1974
45. Callister Jr WD. Materials science and engineering an introduction. 2007.
46. Properties and selection: irons, steels, and high-performance alloys. ASM
47. Classification and application of plain Carbon steels10.1016/B978-0-12-803581-8.10268-1 ↗
48. EN ISO 9015-1. International Organization for Standardization, 2001. EN ISO 9015-1, Destructive tests on welds in metallic materials — Hardness testing — Part 1: Hardness test on arc welded joints 2001.
49. EN 10025-3. European Committee for Standardization, 2019. EN 10025-3, Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels. CEN, Brussels.: 2019.
50. The virtual fields method for Extracting constitutive Parameters from full-field measurements: a review
51. Kramer · 2014 · 1
52. MatchID. Manual MatchID Version 2017.1. MatchID - Methodology beyond colors Image Correlation & Matrial Identification; 2017.
53. Virtual strain gage size study
54. Application of digital image correlation for the study of strain concentrations due to change in geometry in weld beads: parent interface of structural steel welds10.1080/13621718.2016.1174359 ↗
55. On the fatigue behavior of duplex and high-strength welded cruciform joints10.1016/j.engstruct.2021.113161 ↗
56. EN ISO 10025-3. EN ISO 10025-3:2019 Hot rolled products of structural steels Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels 2019. https://www.en-standard.eu/bs-en-10025-3-2019-hot-rolled-products-of-structural-steels-technical-delivery-conditions-for-normalized-normalized-rolled-weldable-fine-grain-structural-steels/ (accessed October 30, 2023).
57. Stress-strain curves for hot-rolled steels10.1016/j.jcsr.2017.01.024 ↗
58. Stress-strain curves for wire arc additively manufactured steels10.1016/j.engstruct.2023.115628 ↗
59. Steel design by advanced analysis: material modeling and strain limits10.1016/j.eng.2018.11.026 ↗
60. The new IIW recommendations for fatigue assessment of welded joints and components - a comprehensive code recently updated10.1016/j.ijfatigue.2008.04.002 ↗
61. Fatigue Design of Steel and Composite Structures
62. DNV-RP-C203 2011. DNV-RP-C203 Fatigue Design of Offshore Steel Structures. 2011.
63. Fatigue strength of severely notched specimens made of ti-6Al-4V under multiaxial loading10.1111/ffe.12272 ↗
64. Effect of build thickness and geometry on quasi-static and fatigue behavior of ti-6Al-4V produced by electron beam melting
65. Critical assessment of the fatigue performance of additively manufactured ti-6Al-4V and perspective for future research10.1016/j.ijfatigue.2015.12.003 ↗
66. Avanzini A. Fatigue Behavior of Additively Manufactured Stainless Steel 316L. Materials 2023, Vol 16, Page 65 2022;16:65. Doi: 10.3390/MA16010065.10.3390/ma16010065 ↗
67. JSSC. Fatigue design recommendations for steel structures - Google Books. 1995.
68. FOSTA P 835. P 835 - Feuerverzinken im Stahl- und Verbundbrückenbau - Matplus Shop. 2014.
69. Simões da silva L, Veljkovic M. a comparison of the fatigue behavior between S355 and S690 steel grades10.1016/j.jcsr.2012.07.021 ↗
70. Probabilistic strain-fatigue life performance based on stochastic analysis of structural and WAAM-stainless steels10.1016/j.engfailanal.2021.105495 ↗
71. Wood P, Libura T, Kowalewski ZL, Williams G, Serjouei A. Influences of Horizontal and Vertical Build Orientations and Post-Fabrication Processes on the Fatigue Behavior of Stainless Steel 316L Produced by Selective Laser Melting. Materials 2019, Vol 12, Page 4203 2019;12:4203. Doi: 10.3390/MA12244203.10.3390/ma12244203 ↗
72. Elucidating the relations between monotonic and fatigue properties of laser powder bed fusion stainless steel 316L10.1007/s11837-017-2640-z ↗
73. Effects of manufacturing parameters and mechanical post-processing on stainless steel 316L processed by laser powder bed fusion10.1016/j.msea.2020.140660 ↗
74. Impact of single structural voids on fatigue properties of AISI 316L manufactured by laser powder bed fusion10.1016/j.ijfatigue.2021.106207 ↗
75. Investigation of the anisotropic fatigue behavior of additively manufactured structures made of AISI 316L with short-time procedures PhyBaLLIT and PhyBaLCHT10.1016/j.ijfatigue.2019.03.022 ↗
76. Blinn B, Klein M, Gläßner C, Smaga M, Aurich JC, Beck T. An Investigation of the Microstructure and Fatigue Behavior of Additively Manufactured AISI 316L Stainless Steel with Regard to the Influence of Heat Treatment. Metals 2018, Vol 8, Page 220 2018;8:220. Doi: 10.3390/MET8040220.10.3390/met8040220 ↗
77. On the fatigue properties of metals manufactured by selective laser melting — the role of ductility
78. Voloskov B, Evlashin S, Dagesyan S, Abaimov S, Akhatov I, Sergeichev I. Very High Cycle Fatigue Behavior of Additively Manufactured 316L Stainless Steel. Materials 2020, Vol 13, Page 3293 2020;13:3293. Doi: 10.3390/MA13153293.10.3390/ma13153293 ↗
79. Fatigue performance of additive manufactured metallic parts10.1108/13552541311302932 ↗
80. Uhlmann · ScienceDirect Dynamical fatigue behavior of additive manufactured products for a fundamental life cycle approach · 2017
81. Fatigue and fracture behaviour of laser powder bed fusion stainless steel 316L: influence of processing parameters10.1016/j.msea.2017.07.071 ↗
82. Effect of post-treatments on the fatigue behaviour of 316L stainless steel manufactured by laser powder bed fusion10.1016/j.ijfatigue.2019.01.013 ↗
83. Fatigue strength of 316 L stainless steel Manufactured by selective laser melting10.1007/s11665-020-04859-x ↗
84. Cyclic response of additive manufactured 316L stainless steel: the role of cell structures10.1016/j.scriptamat.2021.114190 ↗
85. Effect of residual stress on fatigue strength of 316L stainless steel produced by laser powder bed fusion process10.1007/s40964-021-00164-8 ↗
86. Fatigue properties and S-N curve estimating of 316L stainless steel prepared by SLM10.1016/j.ijfatigue.2022.106946 ↗
87. Rautio T, Jaskari M, Gundgire T, Iso-Junno T, Vippola M, Järvenpää A. The Effect of Severe Shot Peening on Fatigue Life of Laser Powder Bed Fusion Manufactured 316L Stainless Steel. Materials 2022, Vol 15, Page 3517 2022;15:3517. Doi: 10.3390/MA15103517.10.3390/ma15103517 ↗
88. A statistical distribution function of wide applicability10.1115/1.4010337 ↗
89. Analysis of the fatigue life estimators of the materials using small samples
90. Reliability of fatigue strength curves for riveted connections using Normal and weibull distribution functions. ASCE ASME J risk uncertain eng syst a
91. On the fatigue behaviour and reliability assessment of high strength welded details
92. Estimating the cumulative probability of failure data points to be plotted on weibull and other probability paper10.1109/14.55721 ↗
93. Smith DDJ. Variable Failure Rates and Probability Plotting. Reliability, Maintainability and Risk 2022:75–87. Doi: 10.1016/B978-0-323-91261-7.00006-X.10.1016/B978-0-323-91261-7.00006-X ↗
94. Comparison of fatigue data using the maximum likelihood method10.1016/S0013-7944(03)00009-2 ↗
95. On weighted least squares estimation for the parameters of weibull distribution10.1007/978-1-84800-113-8_3 ↗
96. Reliability-based design and code calibration10.1016/B978-0-08-099997-5.00035-6 ↗