Fatigue analysis and heat treatment comparison of additively manufactured specimens from AlSi10Mg alloy

1. SANTOS, Edson, Masanari SHIOMI, Kozo OSAKADA a Tahar LAOUI. Rapid manufacturing of metal components by laser forming. International Journal of Machine Tools and Manufacture [online]. 2006, 46(12-13), 1459-1468 [cit. 2023-10-05]. ISSN 08906955. Dostupné z: doi:10.1016/j.ijmachtools.2005.09.005.10.1016/j.ijmachtools.2005.09.005 ↗

2. ROMBOUTS, M., J.P. KRUTH, L. FROYEN a P. MERCELIS. Fundamentals of Selective Laser Melting of alloyed steel powders. CIRP Annals [online]. 2006, 55(1), 187-192 [cit. 2023-10-05]. ISSN 00078506. Dostupné z: doi:10.1016/S0007-8506(07)60395-3.10.1016/S0007-8506(07)60395-3 ↗

3. FERRO, Paolo, Alberto FABRIZI, Filippo BERTO, Gianpaolo SAVIO, Roberto MENEGHELLO a Stefano ROSSO. Defects as a root cause of fatigue weakening of additively manufactured AlSi10Mg components. Theoretical and Applied Fracture Mechanics [online]. 2020, 108 [cit. 2023-10-05]. ISSN 01678442. Dostupné z: doi:10.1016/j.tafmec.2020.102611.10.1016/j.tafmec.2020.102611 ↗

4. KEMPEN, K., L. THIJS, J. VAN HUMBEECK a J.-P. KRUTH. Mechanical Properties of AlSi10Mg Produced by Selective Laser Melting. Physics Procedia [online]. 2012, 39, 439-446 [cit. 2023-10-05]. ISSN 18753892. Dostupné z: doi:10.1016/j.phpro.2012.10.059.10.1016/j.phpro.2012.10.059 ↗

5. BRANDL, Erhard, Ulrike HECKENBERGER, Vitus HOLZINGER a Damien BUCHBINDER. Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior [online]. 2012, 34, 159-169 [cit. 2023-10-05]. ISSN 02613069. Dostupné z: doi:10.1016/j.matdes.2011.07.067.10.1016/j.matdes.2011.07.067 ↗

6. BERETTA, S., M. GARGOURIMOTLAGH, S. FOLETTI, A. DU PLESSIS a M. RICCIO. Fatigue strength assessment of “as built” AlSi10Mg manufactured by SLM with different build orientations. International Journal of Fatigue [online]. 2020, 139 [cit. 2023-10-05]. ISSN 01421123. Dostupné z: doi:10.1016/j.ijfatigue.2020.105737.10.1016/j.ijfatigue.2020.105737 ↗

7. LIU, Shiwen, Haihong ZHU, Gangyong PENG, Jie YIN a Xiaoyan ZENG. Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis [online]. 2018, 142, 319-328 [cit. 2023-10-05]. ISSN 02641275. Dostupné z: doi:10.1016/j.matdes.2018.01.022.10.1016/j.matdes.2018.01.022 ↗

8. RŮŽIČKOVÁ, Ludmila, Jana SOBOTOVÁ, Libor BERÁNEK, Lukáš PELIKÁN a Jan ŠIMOTA. Influence of Stress Relief Annealing Parameters on Mechanical Properties and Decomposition of Eutectic Si Network of L-PBF Additive Manufactured Alloy AlSi10Mg. Metals. 2022, 12(9). ISSN 2075-4701. Dostupné z: doi:10.3390/met12091497.10.3390/met12091497 ↗

9. AGENBAG, N. a C. MCDULING. Fatigue Life Testing of Locally Additive Manufactured AlSilOMg Test Specimens [online]. 2021, 37 [cit. 2023-10-05]. ISSN 23098988. Dostupné z: doi:10.17159/2309-8988/2019/v37a3.10.17159/2309-8988/2019/v37a3 ↗

10. GEROV, M., E. VLADISLAVSKAYA, V. TERENT’EV, D. PROSVIRNIN, O. ANTONOVA a A. KOLMAKOV. Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting. Russian Metallurgy (Metally) [online]. 2019, 2019(4), 392-397 [cit. 2023-10-05]. ISSN 0036-0295. Dostupné z: doi:10.1134/S0036029519040098.10.1134/S0036029519040098 ↗

11. MOWER, Todd a Michael LONG. Mechanical behavior of additive manufactured, powder-bed laser-fused materials. Materials Science and Engineering: A [online]. 2016, 651, 198-213 [cit. 2023-10-05]. ISSN 09215093. Dostupné z: doi:10.1016/j.msea.2015.10.068.10.1016/j.msea.2015.10.068 ↗

12. SANTOS MACÍAS, Juan, Chola ELANGESWARAN, Lv ZHAO, Jean-Yves BUFFIèRE, Brecht VAN HOOREWEDER a Aude SIMAR. Fatigue crack nucleation and growth in laser powder bed fusion AlSi10Mg under as built and post-treated conditions [online]. 2021, 210 [cit. 2023-10-05]. ISSN 02641275. Dostupné z: doi:10.1016/j.matdes.2021.110084.10.1016/j.matdes.2021.110084 ↗

13. ZHANG, Changchun, Haihong ZHU, Hailong LIAO, Yong CHENG, Zhiheng HU a Xiaoyan ZENG. Effect of heat treatments on fatigue property of selective laser melting AlSi10Mg. International Journal of Fatigue. 2018, 116, 513-522. ISSN 01421123. Dostupné z: doi:10.1016/j.ijfatigue.2018.07.016.10.1016/j.ijfatigue.2018.07.016 ↗

14. MATUŠŮ, Martin, Katharina DIMKE, Jan ŠIMOTA, Jan PAPUGA, Jakub ROSENTHAL, Vladimír MÁRA a Libor BERÁNEK. Energy-based method for analyzing fatigue properties of additively manufactured AlSi10Mg. Journal of Mechanical Science and Technology. 2023, 37(3), 7. ISSN 1738-494X. Dostupné z: doi:10.1007/s12206-022-2110-6.10.1007/s12206-022-2110-6 ↗

15. BAEK, Min-Seok, R. KREETHI, Tae-Hyun PARK, Yongho SOHN a Kee-Ahn LEE. Influence of heat treatment on the high-cycle fatigue properties and fatigue damage mechanism of selective laser melted AlSi10Mg alloy. Materials Science and Engineering: A. 2021, 819. ISSN 09215093. Dostupné z: doi:10.1016/j.msea.2021.141486.10.1016/j.msea.2021.141486 ↗

16. PARK, Tae-Hyun, Min-Seok BAEK, Holden HYER, Yongho SOHN a Kee-Ahn LEE. Effect of direct aging on the microstructure and tensile properties of AlSi10Mg alloy manufactured by selective laser melting process. Materials Characterization [online]. 2021, 176 [cit. 2023-10-05]. ISSN 10445803. Dostupné z: doi:10.1016/j.matchar.2021.111113.10.1016/j.matchar.2021.111113 ↗

17. FARGIONE, G. Rapid determination of the fatigue curve by the thermographic method. International Journal of Fatigue. 2001, 24(1), 11-19. ISSN 01421123. Dostupné z: doi:10.1016/S0142-1123(01)00107-4.10.1016/S0142-1123(01)00107-4 ↗

18. Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N)and Strain-Life (e-N) Fatigue Data. Revised edition 2015. United States of America: ASTM International, 1981.

19. LUONG, Minh Phong. Fatigue limit evaluation of metals using an infrared thermographic technique. Mechanics of Materials. 1998, 28(1-4), 155-163. ISSN 01676636. Dostupné z: doi:10.1016/S0167-6636(97)00047-1.10.1016/S0167-6636(97)00047-1 ↗

20. LA ROSA, G. Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components. International Journal of Fatigue. 2000, 22(1), 65-73. ISSN 01421123. Dostupné z: doi:10.1016/S0142-1123(99)00088-2.10.1016/S0142-1123(99)00088-2 ↗

21. PROCHAZKA, R., J. DZUGAN a P. KONOPIK. Fatigue limit evaluation of structure materials based on thermographic analysis. Procedia Structural Integrity. 2017, 7, 315-320. ISSN 24523216. Dostupné z: doi:10.1016/j.prostr.2017.11.094.10.1016/j.prostr.2017.11.094 ↗

22. CURA, Francesca, Graziano CURTI a Raffaela SESANA. A new iteration method for the thermographic determination of fatigue limit in steels. International Journal of Fatigue. 2005, 27(4), 453-459. ISSN 01421123. Dostupné z: doi:10.1016/j.ijfatigue.2003.12.009.10.1016/j.ijfatigue.2003.12.009 ↗

23. FERNÁNDEZ-CANTELI, Alfonso, Enrique CASTILLO, Antonio ARGÜELLES, Pelayo FERNÁNDEZ a Margarita CANALES. Checking the fatigue limit from thermographic techniques by means of a probabilistic model of the epsilon–N field. International Journal of Fatigue. 2012, 39, 109-115. ISSN 01421123. Dostupné z: doi:10.1016/j.ijfatigue.2011.02.008.10.1016/j.ijfatigue.2011.02.008 ↗

24. HUANG, Jia, Marie-Laetitia PASTOR, Christian GARNIER a Xiaojing GONG. Rapid evaluation of fatigue limit on thermographic data analysis. International Journal of Fatigue. 2017, 104, 293-301. ISSN 01421123. Dostupné z: doi:10.1016/j.ijfatigue.2017.07.029.10.1016/j.ijfatigue.2017.07.029 ↗

25. LIU, Zhanqi, Haijiang WANG, Xueting CHEN a Wei WEI. Rapid Fatigue Limit Estimation of Metallic Materials Using Thermography-Based Approach. Metals. 2023, 13(6). ISSN 2075-4701. Dostupné z: doi:10.3390/met13061147.10.3390/met13061147 ↗

26. UZAN, Naor, Roni SHNECK, Ori YEHESKEL a Nachum FRAGE. Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM). Materials Science and Engineering: A [online]. 2017, 704, 229-237 [cit. 2023-10-13]. ISSN 09215093. Dostupné z: doi:10.1016/j.msea.2017.08.027.10.1016/j.msea.2017.08.027 ↗

27. TAKATA, Naoki, Hirohisa KODAIRA, Keito SEKIZAWA, Asuka SUZUKI a Makoto KOBASHI. Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments. Materials Science and Engineering: A [online]. 2017, 704, 218-228 [cit. 2023-10-13]. ISSN 09215093. Dostupné z: doi:10.1016/j.msea.2017.08.029.10.1016/j.msea.2017.08.029 ↗

28. ZHUO, Longchao, Zeyu WANG, Hongjia ZHANG, Enhuai YIN, Yanlin WANG, Tao XU a Chao LI. Effect of post-process heat treatment on microstructure and properties of selective laser melted AlSi10Mg alloy. Materials Letters [online]. 2019, 234, 196-200 [cit. 2023-10-13]. ISSN 0167577X. Dostupné z: doi:10.1016/j.matlet.2018.09.109.10.1016/j.matlet.2018.09.109 ↗

29. KOHOUT, J a S VĚCHET. A new function for fatigue curves characterization and its multiple merits. International Journal of Fatigue. 2001, 23(2), 175-183. ISSN 01421123. Dostupné z: doi:10.1016/S0142-1123(00)00082-7.10.1016/S0142-1123(00)00082-7 ↗

30. PYTTEL, B., D. SCHWERDT a C. BERGER. Very high cycle fatigue – Is there a fatigue limit?. International Journal of Fatigue [online]. 2011, 33(1), 49-58 [cit. 2024-04-02]. ISSN 01421123. Dostupné z: doi:10.1016/j.ijfatigue.2010.05.009.10.1016/j.ijfatigue.2010.05.009 ↗

31. SONSINO, C. Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safety. International Journal of Fatigue [online]. 2007, 29(12), 2246-2258 [cit. 2024-04-02]. ISSN 01421123. Dostupné z: doi:10.1016/j.ijfatigue.2006.11.015.10.1016/j.ijfatigue.2006.11.015 ↗

32. MENEGHETTI, G. Analysis of the fatigue strength of a stainless steel based on the energy dissipation. International Journal of Fatigue. 2007, 29(1), 81-94. ISSN 01421123. Dostupné z: doi:10.1016/j.ijfatigue.2006.02.043.10.1016/j.ijfatigue.2006.02.043 ↗

33. TORABIAN, Noushin, Véronique FAVIER, Saeed ZIAEI-RAD, Justin DIRRENBERGER, Frédéric ADAMSKI a Nicolas RANC. Calorimetric Studies and Self-Heating Measurements for a Dual-Phase Steel Under Ultrasonic Fatigue Loading. Fatigue and Fracture Test Planning, Test Data Acquisitions and Analysis. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2017, 81-93. ISBN 978-0-8031-7639-3. Dostupné z: doi:10.1520/STP159820160053.10.1520/STP159820160053 ↗

34. DOUDARD, C., S. CALLOCH, P. CUGY, A. GALTIER a F. HILD. A probabilistic two‐scale model for high‐cycle fatigue life predictions [online]. 2005, 28(3), 279-288 [cit. 2023-12-05]. ISSN 8756-758X. Dostupné z: doi:10.1111/j.1460-2695.2005.00854.x.10.1111/j.1460-2695.2005.00854.x ↗

35. LEPITRE, P., S. CALLOCH, C. DOUDARD, M. DHONDT a M. SURAND. Influence of Surface Integrity and Coating on the High Cycle Fatigue Properties of 300M Steel from Self-Heating Tests under Cyclic Loads. Procedia CIRP [online]. 2022, 108, 37-42 [cit. 2023-12-05]. ISSN 22128271. Dostupné z: doi:10.1016/j.procir.2022.03.012.10.1016/j.procir.2022.03.012 ↗

36. MUNIER, Rémi, Cédric DOUDARD, Sylvain CALLOCH a Bastien WEBER. Determination of high cycle fatigue properties of a wide range of steel sheet grades from self-heating measurements. International Journal of Fatigue [online]. 2014, 63, 46-61 [cit. 2023-12-05]. ISSN 01421123. Dostupné z: doi:10.1016/j.ijfatigue.2014.01.004.10.1016/j.ijfatigue.2014.01.004 ↗

37. FIOCCHI, J., A. TUISSI, P. BASSANI a C.A. BIFFI. Low temperature annealing dedicated to AlSi10Mg selective laser melting products. Journal of Alloys and Compounds [online]. 2017, 695, 3402-3409 [cit. 2023-10-02]. ISSN 09258388. Dostupné z: doi:10.1016/j.jallcom.2016.12.019.10.1016/j.jallcom.2016.12.019 ↗