Synergistic impact of corrosion pitting on the rotating bending fatigue of additively manufactured 316L stainless steel: Integrated experimental and modeling analyses

In this study, the ex-situ rotating bending corrosion fatigue behavior of laser powder bed fused stainless steel (SS) 316L has been studied incorporating experimental analyses and modeling. The findings revealed significant variations (almost 20 %) in fatigue lifetime in pre-corroded specimens relative to non-corroded (virgin) specimens because of corrosion-derived pitting phenomena on the surface. To this end, the fatigue strength of virgin (non-corroded) and pre-corroded SS 316L were recorded at 242 MPa and 203 MPa, respectively. Upon conducting the fatigue tests and extracting stress-life trends, advanced microstructural characterization and postmortem analyses were used to quantify fatigue crack behavior and fracture surface. An empirical model is also developed employing depth-sensing indentation testing, linear elastic fracture mechanics, and computer tomography scans to propose an optimum predictive trend. The analysis comparing existing models with our proposed model demonstrates reasonable agreement between experimental findings and the predicted life for the studied laser powder bed fused SS 316L material exposed to corrosion rotating bending fatigue test. The findings of this research carry important contributions to the structural integrity and longevity of marine engineering, ship construction, naval operations, and naval aviation where materials and components are exposed to cyclic loading and corrosion.