Life prediction and failure analysis in laser powder bed fused TiC/Ti6Al4V titanium matrix composite under high cycle and very high cycle fatigue conditions
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. 3D printing technologies: Techniques, materials, and post-processing10.1016/j.coche.2020.04.001 ↗
2. Additive manufacturing of Ti6Al4V alloy: A review10.1016/j.matdes.2018.107552 ↗
3. Effect of energy density and scanning strategy on densification, microstructure and mechanical properties of 316L stainless steel processed via selective laser melting10.1016/j.msea.2019.138455 ↗
4. An overview of powder granulometry on feedstock and part performance in the selective laser melting process
5. Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting10.1016/j.matdes.2014.07.043 ↗
6. Experimental investigation on selective laser melting of 17–4PH stainless steel10.1016/j.optlastec.2016.07.012 ↗
7. Influence of element vaporization on formability, composition, microstructure, and mechanical performance of the selective laser melted Mg–Zn–Zr components10.1016/j.matlet.2015.05.074 ↗
8. Influence of thermodynamics within molten pool on migration and distribution state of reinforcement during selective laser melting of AlN/AlSi10Mg composites10.1016/j.ijmachtools.2015.10.004 ↗
9. Metal fabrication by additive manufacturing using laser and electron beam melting technologies10.1016/S1005-0302(12)60016-4 ↗
10. Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg10.1016/j.jallcom.2017.11.020 ↗
11. Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism10.1016/j.msea.2016.03.088 ↗
12. Effect of elevated temperature on high-cycle and very-high-cycle fatigue properties of Ni-based superalloy manufactured by selective laser melting10.1016/j.ijfatigue.2021.106250 ↗
13. An experimental investigation of fatigue performance and crack initiation characteristics for an SLMed Ti-6Al-4V under different stress ratios up to very-high-cycle regime10.1016/j.ijfatigue.2022.107119 ↗
14. Graphene-TiC hybrid reinforced titanium matrix composites with 3D network architecture: Fabrication, microstructure and mechanical properties10.1016/j.jallcom.2020.157777 ↗
15. Synergistic strengthening behavior and microstructural optimization of hybrid reinforced titanium matrix composites during thermomechanical processing10.1016/j.matchar.2020.110527 ↗
16. Multiscale architecture and superior high-temperature performance of discontinuously reinforced titanium matrix composites10.1002/adma.202000688 ↗
17. The impact of matrix texture and whisker orientation on property anisotropy in titanium matrix composites: Experimental and computational evaluation10.1016/j.compositesb.2021.108682 ↗
18. Roles of reinforcements in twin nucleation and nano-α precipitation in the hybrid TiB/TiC-reinforced titanium matrix composites during high-temperature fatigue10.1016/j.scriptamat.2021.113758 ↗
19. Graphene-reinforced bulk metal matrix composites: Synthesis, microstructure, and properties10.1515/rams-2020-0007 ↗
20. Microstructure and mechanical properties of functionally graded TiC p /Ti6Al4V composite fabricated by laser melting deposition10.1016/j.ceramint.2017.09.054 ↗
21. Microstructure and tensile properties of TiCp/Ti6Al4V titanium matrix composites manufactured by laser melting deposition10.1016/j.jmatprotec.2017.10.005 ↗
22. Microstructure and strengthening mechanism of boride in-situ reinforced titanium matrix composites prepared by plasma activated sintering10.1016/j.ceramint.2021.02.165 ↗
23. Gigacycle fatigue of metallic aircraft components10.1016/j.ijfatigue.2009.03.015 ↗
24. Fatigue crack propagation and fracture characteristics of in-situ titanium-matrix composites10.1016/S0142-1123(99)00114-0 ↗
25. Study on tensile and high cycle fatigue properties of TiC particle reinforced titanium matrix composite10.4028/www.scientific.net/MSF.546-549.1535 ↗
26. Fatigue in Ti–6Al–4V–B alloys10.1016/j.actamat.2010.09.008 ↗
27. The effect of processing on the 455°C tensile and fatigue behavior of boron-modified Ti–6Al–4V10.1016/j.ijfatigue.2009.04.013 ↗
28. Fatigue characteristics of a biomedical β-type titanium alloy with titanium boride10.1016/j.msea.2015.05.078 ↗
29. Very high-cycle fatigue and high-cycle fatigue of minor boron-modified Ti-6Al-4V alloy10.2320/matertrans.MT-M2019169 ↗
30. Effects of three stress levels on the fatigue properties and fracture mechanisms of an in-situ synthesized TiB/Ti-6Al-4V titanium matrix composite10.1016/j.matchar.2022.112511 ↗
31. High-mass-proportion TiCp/Ti6Al4V titanium matrix composites prepared by directed energy deposition
32. Effects of defects, inclusions and inhomogeneities on fatigue strength10.1016/0142-1123(94)90001-9 ↗
33. Gigacycle fatigue of ferrous alloys10.1046/j.1460-2695.1999.t01-1-00185.x ↗
34. Prediction of the S-N curves of high-strength steels in the very high cycle fatigue regime10.1016/j.ijfatigue.2010.02.006 ↗
35. S-N curves in the very-high-cycle fatigue regime: Statistical modeling based on the hydrogen embrittlement consideration10.1111/ffe.12431 ↗
36. Effect of microstructure, residual stresses and building orientation on the fatigue response up to 109 cycles of an SLM AlSi10Mg alloy10.1016/j.ijfatigue.2020.105659 ↗
37. Fatigue life and mechanistic modeling of interior micro-defect induced cracking in high cycle and very high cycle regimes10.1016/j.actamat.2018.07.036 ↗
38. Benefits of high gradient solidification for creep and low cycle fatigue of AM1 single crystal superalloy10.1016/j.msea.2015.07.045 ↗
39. Influence of matrix characteristics on tensile properties of in situ synthesized TiC/TA15 composite10.1016/j.msea.2012.05.092 ↗
40. The influences of melting degree of TiC reinforcements on microstructure and mechanical properties of laser direct deposited Ti6Al4V-TiC composites10.1016/j.matdes.2017.09.063 ↗
41. Microstructural effects on the high-cycle fatigue and fracture behaviors of Ti-6Al-4V alloy10.1016/j.engfracmech.2020.107129 ↗
42. Enhanced extra-long life fatigue resistance of a bimodal titanium alloy by laser shock peening10.1016/j.ijfatigue.2020.105868 ↗
43. An experimental investigation of fatigue performance and crack initiation characteristics for an SLMed Ti-6Al-4V under different stress ratios up to_very-high-cycle regime10.1016/j.ijfatigue.2022.107119 ↗
44. Effects of the microstructure and porosity on properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)
45. The effect of laser power and traverse speed on microstructure, porosity, and build height in laser-deposited Ti-6Al-4V10.1016/S1359-6462(00)00408-5 ↗
46. Fracture and fatigue in additively manufactured metals10.1016/j.actamat.2021.117240 ↗
47. The effects of particle clustering on the mechanical behavior of particle reinforced composites10.1016/S1359-8368(97)00031-0 ↗
48. Investigating environmental effects on small fatigue crack growth in Ti–6242S using combined ultrasonic fatigue and scanning electron microscopy10.1016/j.ijfatigue.2014.09.007 ↗
49. Fabrication of carbide-particle-reinforced titanium aluminide-matrix composites by laser-engineered net shaping10.1007/s11661-004-1016-5 ↗
50. A stress-strain function for the fatigue of metals
51. Microstructure based cracking behavior and life assessment of titanium alloy under very-high-cycle fatigue with elevated temperatures10.1016/j.ijfatigue.2022.106914 ↗
52. Faceted crack induced failure behavior and micro-crack growth based strength evaluation of titanium alloys under very high cycle fatigue10.1016/j.ijfatigue.2019.105369 ↗
53. Coupling effects of microstructure and defects on the fatigue properties of laser powder bed fusion Ti-6Al-4V
54. Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review10.1016/j.pmatsci.2020.100724 ↗
55. As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting10.1007/s11661-011-0731-y ↗
56. Thermomechanical response of 3D laser-deposited Ti–6Al–4V alloy over a wide range of strain rates and temperatures10.1016/j.msea.2015.08.043 ↗
57. Characterization of laser powder deposited Ti–TiC composites and functional gradient materials10.1016/j.jmatprotec.2007.12.055 ↗
58. Microstructure and tensile properties of TiC p /Ti6Al4V titanium matrix composites manufactured by laser melting deposition10.1016/j.jmatprotec.2017.10.005 ↗
59. Cryogenic tensile properties and deformation behavior of a super high strength metastable beta titanium alloy Ti-15Mo-2Al10.1016/j.msea.2021.141344 ↗
60. Metal fatigue effects of small defects and nonmetallic inclusions
61. A theory of fatigue crack initiation at inclusions10.1007/BF02642422 ↗
62. Application of minimum energy formalism in a multiple slip band model for fatigue. I. Calculation of slip band spacings10.1016/0956-7151(91)90078-F ↗
63. A microstructure-based fatigue-crack-initiation model10.1007/s11661-003-0207-9 ↗
64. Low cycle fatigue, fatigue crack propagation and substructures in a series of polycrystalline Cu-Al alloys10.1007/BF02642311 ↗
65. Fatigue life behavior of copper single crystals. Part II: Model for crack nucleation in persistent slip bands10.1111/j.1460-2695.1981.tb01131.x ↗
66. Very high cycle fatigue behavior of a low strength welded joint at moderate temperature10.1016/j.ijfatigue.2012.01.014 ↗
67. Elastic-plastic fracture mechanics for initiation and propagation of notch fatigue cracks10.1111/j.1460-2695.1979.tb01350.x ↗