Investigation on the fatigue crack growth behavior of welded joints in EH690 high-strength marine steel
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Fatigue and fracture mechanics · Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. Effect of Nb interlayer on microstructure and property of Ti-6Al-4V/690 MPa grade steel clad plate by vacuum rolling10.1016/j.msea.2023.145450 ↗
2. Superior pitting corrosion resistance of ultra-high strength low alloy steel via Co-alloying Al and Cu10.1007/s11837-023-06021-z ↗
3. Strengthening and toughening mechanism of coarse-grained heat-affected zone for the Cr-/Mo-free Cu-bearing HSLA steel under high heat input welding conditions10.1007/s10853-022-07631-9 ↗
4. Corrosion behavior research and corrosion prediction of structural steel in marine engineering10.1108/ACMM-06-2022-2664 ↗
5. Study on method of accelerated corrosion experiment in simulated seawater
6. Review of corrosion fatigue in offshore structures: present status and challenges in the offshore wind sector10.1016/j.rser.2016.02.017 ↗
7. Discussion of “Fatigue Reliability: Introduction” by the Committee on Fatigue and Fracture Reliability of the Committee on Structural Safety and Reliability of the Structural Division (January, 1982)10.1061/(ASCE)0733-9445(1984)110:1(195) ↗
8. Fatigue crack propagation performance of Q690 high-strength steel and butt welds10.1016/j.tafmec.2023.103988 ↗
9. Residual stress effects on fatigue life of welded structures using LEFM10.1016/j.engfailanal.2008.06.017 ↗
10. Effect of residual stresses on the fatigue behaviour of welded joints depending on loading conditions and weld geometry10.1016/j.ijfatigue.2008.02.015 ↗
11. Influences of welding parameters on the quality and creep properties of friction stir welded polyethylene plates10.1016/j.matdes.2014.11.039 ↗
12. Influence of TiO2 nanoparticles incorporation to friction stir welded 5083 aluminum alloy on the microstructure, mechanical properties and wear resistance10.1016/j.jallcom.2017.04.114 ↗
13. Fatigue crack growth behavior of Ni-Cr-Mo-V steel welded joints considering strength mismatch effect10.1016/j.ijfatigue.2021.106389 ↗
14. Effects of inclusion size and acicular ferrite on cold cracking for high-strength steel welds of YS 600 MPa grade10.1080/13621718.2016.1178833 ↗
15. Finite element analysis of temperature field, microstructure and residual stress in multi-pass butt-welded 2.25Cr-1Mo steel pipes10.1016/j.commatsci.2008.01.025 ↗
16. Prediction of the residual welding stress in 2.25Cr-1Mo steel by taking into account the effect of the solid-state phase transformations10.1007/s40195-012-0163-8 ↗
17. Microstructure, mechanical properties and fatigue crack growth behavior of friction stir welded joint of 6061–T6 aluminum alloy10.1016/j.ijfatigue.2020.105556 ↗
18. Fatigue crack growth resistance of gas tungsten arc, electron beam and friction stir welded joints of AA2219 aluminium alloy10.1016/j.matdes.2010.10.019 ↗
19. Fatigue crack propagation behavior in friction stir welding of AA6063-T5: Roles of residual stress and microstructure10.1016/j.ijfatigue.2012.02.003 ↗
20. Chen · 2019
21. Crack initiation and propagation behavior in tensile deformation of high-strength titanium alloy with lamellar microstructure
22. Microstructural and mechanical characterization of laser beam welded AA6056 Al-alloy10.1016/j.msea.2011.06.010 ↗
23. On the fatigue performance of laser hybrid welded high Zn 7000 alloys for next generation railway components10.1016/j.ijfatigue.2016.05.017 ↗
24. Fatigue crack propagation in friction stir welded and parent AA608210.1002/srin.200606413 ↗
25. Research on fatigue crack growth behavior of commercial pure titanium base metal and weldment at different temperatures10.1016/j.tafmec.2019.01.017 ↗
26. Understanding of fatigue crack growth behavior in welded joint of a new generation Ni-Cr-Mo-V high strength steel10.1016/j.engfracmech.2018.03.016 ↗
27. Fatigue crack growth behavior of different zones in an overmatched welded joint made with D32 marine structural steel10.3390/met13030535 ↗
28. Study on fatigue crack growth performance of EH36 weldments by laser shock processing (Article)10.1016/j.surfin.2018.10.009 ↗
29. Fatigue crack growth of EH36 steel in air and corrosive marine environments10.1016/j.jcsr.2023.108104 ↗
30. The influence of heat input on the formation of fatigue cracks for high-strength steels resistant to low temperatures10.3390/met12060929 ↗
31. Fatigue crack growth behavior in weld-repaired high-strength low-alloy steel10.1016/j.engfracmech.2011.03.004 ↗
32. Effect of direct quenching on microstructure and mechanical properties of EH690-grade steel
33. A. International, Standard test methods for tension testing of metallic materials: ASTM E8/E8M - 22. In: ASTM International, ASTM International; 2013.
34. Strength mismatch effect on residual stress of 10CrNi3MoV steel considering the back-chipping process10.1016/j.ijpvp.2021.104570 ↗
35. A. International, Standard test method for measurement of fatigue crack growth rates: ASTM E647 - 15e1. In: ASTM International, ASTM International; 2015.
36. Wang Q. Fatigue crack growth behavior of 10Ni5CrMoV high strength steel welding joints (Ph.D. Thesis). Harbin, Chain: Harbin Institute of Technology; 2018. Doi: 10.7666/d.D01585270.
37. Fatigue crack growth rates for offshore wind monopile weldments in air and seawater: SLIC inter-laboratory test results10.1016/j.matdes.2016.10.070 ↗
38. Fatigue design of offshore steel structures: DNVGL-RP-C203. 285.
39. B.S. Institution, Metallic materials - Fatigue testing - Fatigue crack growth method, in: BS ISO 12108:2012, London; 2012.
40. Study on corrosion fatigue crack growth of high strength steel under the seawater corrosive environment
41. Microstructural mechanisms controlling fatigue crack growth in Al-Si-Mg cast alloys10.1016/j.msea.2006.08.130 ↗
42. Numerical simulation of residual stress in 10Ni5CrMoV steel weldments10.1016/j.jmatprotec.2016.09.011 ↗
43. Crack growth direction effects on corrosion-fatigue behaviour of offshore wind turbine steel weldments10.1016/j.marstruc.2020.102881 ↗
44. A new finite element model for welding heat sources10.1007/BF02667333 ↗
45. Weld residual stresses in a thick plate considering back chipping: neutron diffraction, contour method and finite element simulation study10.1016/j.msea.2017.05.079 ↗
46. Hydrogen embrittlement behavior of high strength rail steels: a comparison between pearlitic and bainitic microstructures (Article)10.1016/j.msea.2017.08.022 ↗
47. The effects of thermo-mechanical control process on microstructures and mechanical properties of a commercial pipeline steel10.1016/S0921-5093(01)01904-9 ↗
48. Liu · 2017
49. The effects of load Ratio, interstitial content, and grain size on low-stress fatigue-crack propagation in α-Titanium10.1179/030634573790445550 ↗
50. Internal stress/strain analysis during fatigue crack growth retardation using neutron diffraction (Article)10.3740/MRSK.2018.28.7.398 ↗
51. Fatigue crack growth in a fillet welded joint10.1016/0013-7944(83)90130-3 ↗
52. Hobbacher A. Recommendations for fatigue design of welded joints and components, IIW Collection, in: Recommendations for fatigue design of welded joints and components, London; 2016.10.1007/978-3-319-23757-2 ↗
53. Investigation of distortion-induced fatigue cracked welded details using 3D crack propagation analysis10.1016/j.ijfatigue.2014.02.014 ↗
54. A critical analysis of crack propagation laws
55. The effect of stress ratio during crack propagation and fatigue for 2024–T3 and 7075–T6 aluminum10.1520/STP32032S ↗
56. Elber W. The Significance of Fatigue Crack Closure. ASTM STP 1971; 486: 230-42. Doi: 10.1520/STP26680S.10.1520/STP26680S ↗
57. Effect of load ratio and maximum stress intensity on the fatigue threshold in Ti-6Al-4V10.1016/S0013-7944(00)00099-0 ↗
58. Improved modeling of the effect of R-ratio on crack growth rate10.1016/j.ijfatigue.2006.07.014 ↗
59. Krupp · 2007
60. Near threshold fatigue crack growth behavior10.1016/0036-9748(82)90278-2 ↗
61. Experimental investigation on fatigue crack growth rate of Q690D high strength steel
62. A comparison of the fatigue behavior between S355 and S690 steel grades (Article)10.1016/j.jcsr.2012.07.021 ↗
63. Experimental research on the fatigue crack growth behaviour of Q420C10.1016/j.jcsr.2022.107241 ↗
64. Fatigue crack propagation limit curves for S690QL and S960M high strength steels and their welded joints
65. Experimental study on fatigue crack growth rate of Q345qD bridge steel
66. Experiment research on corrosion fatigue crack propagation of marine engineering equipment material E690 high strength steel
67. Liu Y. Study on fatigue crack growth behavior in welded steel plates used for bridges (Ph.D. Thesis), Wuhan, China: Huazhong University of Science and Technology; 2010. Doi: 10.7666/d.d139990.
68. Experimental and model study on corrosion fatigue crack propagation of Q420B steel in acid rain condition
69. Research on 500MPa class high performance steel (Q500qE) using in railway steel bridges (Ph.D. Thesis), Beijing, China: China Academy of
70. Recho N. Fracture Mechanics and Crack Growth. Wiley-Blackwell [Imprint]; John Wiley & Sons, Incorporated; John Wiley & Sons Australia, Limited [Dist]; 2012.
71. Stress ratio effects on fatigue fracture morphology in G41400 steel10.1016/0026-0800(83)90029-0 ↗
72. Effect of microstructure and stress ratio on fatigue crack propagation behavior of A7N01 aluminum alloy fiber laser-VPTIG hybrid butt welded10.1016/j.optlastec.2023.109296 ↗
73. Numerical analysis of crack propagation in cyclic-loaded structures
74. Effect of stress ratio and test methods on fatigue crack growth rate for nickel based superalloy Udimet 72010.1016/S0142-1123(99)00009-2 ↗
75. Effect of load ratio on fatigue crack growth behavior of SS316LN using two-parameter (ΔK and Kmax) model
76. The influence of negative and positive stress ratios on crack growth rate in AM60B magnesium alloy10.1016/j.msea.2012.02.091 ↗
77. A survey of maintenance and service logistics management: Classification and research agenda from a maritime sector perspective10.1016/j.cor.2017.03.003 ↗
78. Maintenance/repair and production-oriented life cycle cost/earning model for ship structural optimisation during conceptual design stage10.1080/17445300802564220 ↗