Microstructure sensitive fatigue life prediction model for SLM fabricated Hastelloy-X
Source abstract
Abstract
A microstructure-sensitive fatigue life prediction framework based on CP-FFT is proposed to study SLM fabricated Hastelloy-X. The microstructure enters in the model through the shape, size and orientation distributions of grains in the RVEs, which are generated from experimental EBSD data. The framework has been applied to specimens built in two different directions with different polycrystalline microstructures and is able to accurately predict their fatigue life, using just two experiments for calibration. The model reproduces the better fatigue performance found experimentally at high stresses for samples built in transverse direction, identifying the origin of this anisotropy in grain aspect ratios.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Constitutive modeling of the visco-plastic response of Hastelloy-X and Aluminum Alloy 8009
2. Additive manufacturing of Ni-based superalloys: The outstanding issues10.1557/mrs.2016.211 ↗
3. Microstructure and mechanical properties of Hastelloy X produced by HP-SLM (high power selective laser melting)10.1016/j.matdes.2019.107598 ↗
4. On the size and orientation effect in additive manufactured Ti-6Al-4V
5. Metal additive manufacturing: A review of mechanical properties10.1146/annurev-matsci-070115-032024 ↗
6. Quantitative relationship between anisotropic strain to failure and grain morphology in additively manufactured Ti-6Al-4V10.1016/j.msea.2017.09.017 ↗
7. Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 71810.1016/j.msea.2019.05.007 ↗
8. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review10.1016/j.matdes.2017.11.021 ↗
9. On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading10.1016/j.msea.2016.05.089 ↗
10. Effect of anisotropy and texture on the low cycle fatigue behavior of Inconel 718 processed via electron beam melting10.1016/j.ijfatigue.2017.08.021 ↗
11. Inconel 939 processed by selective laser melting: Effect of microstructure and temperature on the mechanical properties under static and cyclic loading10.1016/j.msea.2013.09.025 ↗
12. Fatigue performance evaluation of selective laser melted Ti–6Al–4V10.1016/j.msea.2014.01.041 ↗
13. Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 71810.1016/j.ijfatigue.2016.08.019 ↗
14. Microstructure, fatigue behavior, and failure mechanisms of direct laser-deposited Inconel 71810.1007/s11837-016-2225-2 ↗
15. Cyclic plasticity and microstructure of as-built SLM Ti-6Al-4V: The effect of build orientation10.1016/j.msea.2017.06.069 ↗
16. Kelley Jr. · 2016
17. Effect of elevated temperature on high-cycle and very-high-cycle fatigue properties of Ni-based superalloy manufactured by selective laser melting10.1016/j.ijfatigue.2021.106250 ↗
18. Microstructure and directional fatigue behavior of Inconel 718 produced by selective laser melting10.1016/j.prostr.2016.06.298 ↗
19. Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel10.1016/j.ijfatigue.2016.03.014 ↗
20. Fatigue characterization and modeling of additively manufactured Hastelloy-X superalloy10.1007/s11665-022-06595-w ↗
21. On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance10.1016/j.ijfatigue.2012.11.011 ↗
22. Mechanical and microstructural investigation of nickel-based superalloy IN718 manufactured by selective laser melting (SLM)
23. Constitutive model of an additively manufactured ductile nickel-based superalloy undergoing cyclic plasticity10.1016/j.ijplas.2020.102752 ↗
24. Laser powder bed fusion of Hastelloy X: Effects of hot isostatic pressing and the hot cracking mechanism10.1016/j.msea.2018.07.008 ↗
25. On the effect of laser powder-bed fusion process parameters on quasi-static and fatigue behaviour of Hastelloy X: A microstructure/defect interaction study
26. Mechanical property study on rapid additive layer manufacture Hastelloy® X alloy by selective laser melting technology
27. Fatigue behavior and modeling for additive manufactured 304L stainless steel: The effect of surface roughness10.1016/j.ijfatigue.2020.105856 ↗
28. LCF behaviour and a comprehensive life prediction model for AlSi10Mg obtained by SLM10.1016/j.ijfatigue.2018.07.030 ↗
29. Low-cycle fatigue behaviour of AISI 18Ni300 maraging steel produced by selective laser melting10.3390/met8010032 ↗
30. Microstructure-sensitive computational modeling of fatigue crack formation10.1016/j.ijfatigue.2010.01.003 ↗
31. Computational homogenization of polycrystals
32. An upscaling approach for micromechanics based fatigue: from RVEs to specimens and component life prediction10.1007/s10704-019-00406-5 ↗
33. High– and low–cycle fatigue crack initiation using polycrystal plasticity10.1098/rspa.2003.1258 ↗
34. Strain-gradient modelling of grain size effects on fatigue of CoCr alloy10.1016/j.actamat.2014.06.044 ↗
35. A stored energy criterion for fatigue crack nucleation in polycrystals10.1016/j.ijfatigue.2014.06.001 ↗
36. Crystal plasticity modelling and HR-DIC measurement of slip activation and strain localization in single and oligo-crystal Ni alloys under fatigue10.1016/j.ijplas.2016.10.001 ↗
37. Is stored energy density the primary meso-scale mechanistic driver for fatigue crack nucleation?10.1016/j.ijplas.2017.11.005 ↗
38. An energetic approach in thermomechanical fatigue for silicon molybdenum cast iron10.1179/mht.2000.17.3.001 ↗
39. Assessing plastically dissipated energy as a condition for fatigue crack growth10.1016/j.ijfatigue.2008.12.009 ↗
40. Microstructure-based fatigue life model of metallic alloys with bilinear Coffin-Manson behavior10.1016/j.ijfatigue.2017.10.014 ↗
41. Crystal plasticity simulation of the effect of grain size on the fatigue behavior of polycrystalline Inconel 71810.1016/j.ijfatigue.2018.04.018 ↗
42. Influence of microstructure variability on short crack behavior through postulated micromechanical short crack driving force metrics10.1016/j.engfracmech.2015.03.001 ↗
43. Mesoscale modeling of microstructurally small fatigue cracks in metallic polycrystals10.1016/j.msea.2014.01.015 ↗
44. On the accuracy of spectral solvers for micromechanics based fatigue modeling10.1007/s00466-018-1598-1 ↗
45. The role of defects and critical pore size analysis in the fatigue response of additively manufactured IN718 via crystal plasticity10.1016/j.matdes.2018.04.022 ↗
46. A full-field crystal plasticity model including the effects of precipitates: Application to monotonic, load reversal, and low-cycle fatigue behavior of Inconel 71810.1016/j.msea.2020.140478 ↗
47. Effect of microstructure on fatigue crack propagation in additive manufactured nickel-based superalloy Haynes 282: an experiment and crystal plasticity study10.1007/s10853-022-06957-8 ↗
48. Fatigue strength of additive manufactured Mar-M-509 superalloy10.1016/j.msea.2022.142913 ↗
49. A crystal plasticity approach to understand fatigue response with respect to pores in additive manufactured aluminium alloys10.1016/j.ijfatigue.2022.106917 ↗
50. Effect of microstructure on the elasto-viscoplastic deformation of dual phase titanium structures
51. Fatigue crack initiation of metals fabricated by additive manufacturing—A crystal plasticity energy-based approach to IN718 life prediction10.3390/cryst10100905 ↗
52. The role of defects and critical pore size analysis in the fatigue response of additively manufactured IN718 via crystal plasticity10.1016/j.matdes.2018.04.022 ↗
53. Understanding the low cycle fatigue of additive manufactured Inconel 718: a crystal plasticity modelling approach10.1504/IJTAMM.2021.120798 ↗
54. High-cycle and very-high-cycle fatigue lifetime prediction of additively manufactured AlSi10Mg via crystal plasticity finite element method10.1016/j.ijfatigue.2021.106577 ↗
55. Microstructure-sensitive modeling of competing failure mode between surface and internal nucleation in high cycle fatigue10.1016/j.ijplas.2019.11.001 ↗
56. Effect of printing direction and thickness on the mechanical behaviour of SLM fabricated Hastelloy-X10.1016/j.ijplas.2022.103250 ↗
57. Fatigue crack growth in additively manufactured Hastelloy X - Influences of crack orientation and post-fabrication treatments
58. Grain detection from 2d and 3d EBSD data—Specification of the MTEX algorithm10.1016/j.ultramic.2011.08.002 ↗
59. An algorithm for stress and mixed control in Galerkin-based FFT homogenization10.1002/nme.6069 ↗
60. GrainSizeTools: a Python script for grain size analysis and paleopiezometry based on grain size10.21105/joss.00863 ↗
61. Modeling cyclic deformation of inconel 718 superalloy by means of crystal plasticity and computational homogenization10.1016/j.ijsolstr.2017.06.014 ↗
62. Kinematic hardening rules with critical state of dynamic recovery, part II: Application to experiments of ratchetting behavior10.1016/0749-6419(93)90043-P ↗
63. The relation between macroscopic and microscopic strain hardening in FCC polycrystals10.1016/0001-6160(84)90222-0 ↗
64. An FFT-based Galerkin method for homogenization of periodic media10.1016/j.camwa.2014.05.014 ↗
65. A finite element perspective on nonlinear FFT-based micromechanical simulations10.1002/nme.5481 ↗
66. Finite strain FFT-based non-linear solvers made simple10.1016/j.cma.2016.12.032 ↗
67. Fourier-based schemes with modified Green operator for computing the electrical response of heterogeneous media with accurate local fields10.1002/nme.4641 ↗
68. A non-local methodology for geometrically necessary dislocations and application to crack tips10.1016/j.ijplas.2021.102970 ↗
69. Wavelet transformation based multi-time scaling method for crystal plasticity FE simulations under cyclic loading10.1016/j.cma.2010.03.020 ↗
70. Canistraro · 1998
71. An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: Application to AZ31 Mg alloy10.1016/j.ijplas.2014.02.001 ↗
72. Toward low and high cycle fatigue behavior of SLM-fabricated NiTi: Considering the effect of build orientation and employing a self-heating approach10.1016/j.ijmecsci.2020.105878 ↗