Continuum damage mechanics-based model for the fatigue analysis of welded joints considering the effects of size and position of inner pores
Source abstract
Abstract
Abstract The effects of pore size and position on the local stress are characterized by a parameter P dH . This parameter is then introduced into the elastic fatigue damage model to equivalently reflect the influence of pore. The proposed fatigue damage model is numerically implemented to predict fatigue lives of the joints with different pores, and the results agree well with the experimental data. The sensitivity analyses of fatigue life to the pore parameters are investigated for most common pores in practice. An approximate linear relationship is also obtained between the logarithm of the pore indictor parameter P dH and the predicted fatigue life.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Mechanical Behavior of Composites · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Leyens · 2003
2. Maddox · 1991
3. Fatigue analysis of welded joints: state of development10.1016/S0951-8339(02)00075-8 ↗
4. Fatigue performance of butt-welded joints containing various embedded defects
5. Experimental study of porosity and its relation to fatigue mechanisms of model Al–Si7–Mg0.3 cast Al alloys10.1016/S0921-5093(01)01225-4 ↗
6. On the mechanism of porosity formation during welding of titanium alloys10.1016/j.actamat.2012.02.035 ↗
7. The influence of porosity on the fatigue crack growth behavior of Ti–6Al–4V laser welds10.1007/s10853-006-0833-x ↗
8. Quantitative relationship between weld defect characteristic and fatigue crack initiation life for high-cycle fatigue property10.1016/j.ijfatigue.2019.02.028 ↗
9. Influence of welded pores on very long-life fatigue failure of the electron beam welding joint of TC17 titanium alloy10.3390/ma12111825 ↗
10. 3-D finite element analysis of stress concentration factor in spot-welded joints of steel: the effect of process induced porosity10.1016/j.commatsci.2010.11.033 ↗
11. Three-dimensional visualization of the interaction between fatigue crack and micropores in an aluminum alloy using synchrotron X-ray microtomography10.1007/s11661-007-9214-6 ↗
12. Corner fatigue cracking behavior of hybrid laser AA7020 welds by synchrotron X-ray computed microtomography10.1016/j.msea.2015.11.011 ↗
13. Three-dimensional quantitative in situ study of crack initiation and propagation in AA6061 aluminum alloy sheets via synchrotron laminography and finite-element simulations10.1016/j.actamat.2013.01.035 ↗
14. Very high cycle fatigue behavior of a low strength welded joint at moderate temperature10.1016/j.ijfatigue.2012.01.014 ↗
15. Murakami · 2002
16. Fatigue strength assessment of local stresses in welding joints
17. Kitagawa H, Takahashi S. Applicability of fracture mechanics to very small cracks or the cracks in the early stage. In: Proc. of 2nd ICM, Cleveland, 1976; 1976: 627–631.
18. Application of the cyclic R-curve method to notch fatigue analysis10.1016/j.ijfatigue.2015.06.015 ↗
19. The use of fracture mechanics in the fatigue analysis of welded joints
20. Equivalent crack approach for fatigue life assessment of welded joints10.1016/j.engfracmech.2015.10.022 ↗
21. Probabilistic reliability assessment of a component in the presence of internal defects10.1007/978-3-030-21503-3_39 ↗
22. Probabilistic fatigue-life assessment model for laser-welded Ti-6Al-4V butt joints in the high-cycle fatigue regime10.1016/j.ijfatigue.2018.06.012 ↗
23. The effect of manufacturing defects on the fatigue life of selective laser melted Ti-6Al-4V structures10.1016/j.matdes.2020.108708 ↗
24. A new approach to correlate the defect population with the fatigue life of selective laser melted Ti-6Al-4V10.1016/j.ijfatigue.2020.105584 ↗
25. A probabilistic framework to define the design stress and acceptable defects under combined-cycle fatigue conditions10.1016/j.engfracmech.2019.106784 ↗
26. The imaging of failure in structural materials by synchrotron radiation X-ray microtomography10.1016/j.engfracmech.2017.07.027 ↗
27. Porosity induced fatigue damage of laser welded 7075–T6 joints investigated via synchrotron X-ray microtomography10.1179/1362171814Y.0000000249 ↗
28. Development of a novel fatigue damage model with AM effects for life prediction of commonly-used alloys in aerospace10.1016/j.ijmecsci.2019.02.032 ↗
29. Fatigue life calculation for TC4-TC11 titanium alloy specimens fabricated by laser melting deposition10.1016/j.tafmec.2018.04.009 ↗
30. An elasto-plastic-damage model for initiation and propagation of spalling in rolling bearings
31. Experiments and numerical simulations for the fatigue behavior of a novel TA2-TA15 titanium alloy fabricated by laser melting deposition10.1016/j.ijfatigue.2018.12.001 ↗
32. Fatigue life calculation for a specimen with an impact pit considering impact damage, residual stress relaxation and elastic-plastic fatigue damage10.1016/j.ijfatigue.2016.11.036 ↗
33. High cycle fatigue analysis in presence of residual stresses by using a continuum damage mechanics model10.1016/j.ijfatigue.2014.08.013 ↗
34. Fatigue damage evolution and lifetime prediction of welded joints with the consideration of residual stresses and porosity10.1016/j.ijfatigue.2017.06.014 ↗
35. Quantitative analysis of weld-pore size and depth and effect on fatigue life of Ti-6Al-2Zr-1Mo-1V alloy weldments10.3390/met7100417 ↗
36. Numerical analysis of the effect of pore on local stresses in spot welds10.1016/j.commatsci.2011.03.036 ↗
37. Effect of humidity on porosity, microstructure, and fatigue strength of A7N01S-T5 aluminum alloy welded joints in high-speed trains10.1016/j.matdes.2015.06.177 ↗
38. Lemaitre J, Desmorat R. Engineering damage mechanics: ductile, creep, fatigue and brittle failures. Springer Science & Business Media; 2005.
39. Continuum damage mechanics analysis of fatigue crack initiation10.1016/S0142-1123(98)00032-2 ↗
40. Polák J. Cyclic deformation, crack initiation, and low cycle fatigue comprehensive structural integrity vol 4 ed I Milne, RO Ritchie and B Karihaloo (Amsterdam: Elsevier); 2003.10.1016/B0-08-043749-4/04060-X ↗
41. Initiation and growth behaviour of small internal fatigue cracks in Ti-6Al-4V via synchrotron radiation microcomputed tomography10.1111/ffe.13085 ↗
42. Influence of porosity on the high cycle fatigue behaviour of laser Beam welded Ti-6Al-4V butt joints10.1016/j.prostr.2017.11.107 ↗
43. The fatigue behaviors of butt welds ground flush in the super-long life regime10.1016/j.ijfatigue.2011.09.009 ↗
44. Continuum damage mechanics-a continuum mechanics approach to the analysis of damage and fracture
45. Lemaitre · 1994
46. A two scale damage concept applied to fatigue10.1023/A:1018641414428 ↗
47. Constitutive and damage evolution equations of elastic-brittle materials based on irreversible thermodynamics10.1016/S0020-7403(97)87627-8 ↗
48. On some modifications of kinematic hardening to improve the description of ratchetting effects10.1016/0749-6419(91)90050-9 ↗
49. A non-linear continuous fatigue damage model10.1111/j.1460-2695.1988.tb01216.x ↗
50. Multiaxial fatigue damage modelling at macro scale of Ti–6Al–4V alloy10.1016/j.ijfatigue.2009.03.003 ↗
51. The fatigue life prediction for structure with surface scratch considering cutting residual stress, initial plasticity damage and fatigue damage10.1016/j.ijfatigue.2015.01.011 ↗
52. Effects of fatigue damage and wear on fretting fatigue under partial slip condition10.1016/j.wear.2015.07.012 ↗
53. Tao CHH, Liu QL, Liu CHK, Cao CHX, Zhang WF. Failure and prevention of aeronautical titanium alloy. National Defense Industry Press; 2013.