Effect of cold expansion on high-temperature low-cycle fatigue performance of the nickel-based superalloy hole structure
Source abstract
Abstract
Abstract Low-cycle fatigue properties before/after cold expansion under multiple conditions were comparatively researched. The results showed the fatigue cycles of the cold-expanded specimens are more than doubled compared to the original, and the fatigue gain decreased as the stress increased. Surface smoothing, surface compressive residual stress field, and cold work-hardened structure with the sub-grain refinement were recognized as the main reasons for increasing the initiation life. The relatively stable compressive residual stress under 400 °C aging and 820 MPa/RT limited the crack propagation, making the width of the fatigue band and the crack propagation speed of cold-expanded specimen smaller than hole-reamed at the same depth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Prediction of crack growth from bolt holes in a disc10.1016/S0142-1123(99)00122-X ↗
2. An innovative procedure for establishing lifing criteria for turbine disk bores under multiaxial states of stress10.1016/j.ijfatigue.2011.01.008 ↗
3. Structural optimization of uniaxial symmetry non-circular bolt clearance hole on turbine disk10.1016/j.cja.2014.03.026 ↗
4. Structural design and optimization for vent holes of an industrial turbine sealing disk[J]10.1016/j.cja.2020.07.010 ↗
5. An equilibrium multi-objective optimum design for non-circular clearance hole of disk with discrete variables10.1016/j.cja.2017.11.014 ↗
6. Equilibrium Optimize Design of Hyper-elliptic Non-circular Bolt Hole of Disk
7. Axisymmetric substitute structures for circular disks with noncentral holes10.1016/0045-7949(95)00437-8 ↗
8. Effects of residual stresses on probabilistic life of engine disk materials10.1016/j.msea.2006.10.169 ↗
9. A novel hole cold-expansion method and its effect on surface integrity of nickel-based superalloy10.1016/j.jmst.2020.05.022 ↗
10. The effect of CX on fatigue crack growth from open holes at room and high temperature10.1016/S0142-1123(01)00125-6 ↗
11. Effect of split sleeve CX on cracking behaviors of titanium alloy TC4 holes10.1016/j.engfracmech.2012.04.008 ↗
12. Experimental and numerical investigations on the influence of CX on low cycle fatigue life of bolt holes in aeroengine superalloy disk at elevated temperature10.1016/j.ijfatigue.2019.105390 ↗
13. Effects of Hole CX on Fatigue Property of Inconel 718 Superalloy
14. Liu · 2010
15. Quantitative Analysis on Fatigue Fracture of Spray Formed GH738 Alloy
16. Finite Element Modeling of Shot Peening Residual Stress Relaxation in Turbine Disk Assemblies10.1115/1.4030066 ↗
17. Modeling of residual stress relaxation of fatigue in 2024–T351 aluminium alloy10.1016/j.ijfatigue.2010.08.012 ↗
18. Gao · 1986
19. Effect of hole CX on fatigue performance of corroded 7B04-T6 aluminium alloy
20. Estimating the fatigue stress concentration factor of machined surfaces10.1016/S0142-1123(02)00012-9 ↗
21. The relationship between extrusion die line roughness and high cycle fatigue life of an AA6082 alloy10.1016/j.ijfatigue.2008.11.015 ↗
22. Investigation of tensile and high cycle fatigue failure behavior on a TIG welded titanium alloy10.1016/j.intermet.2021.107115 ↗
23. Fretting fatigue failure behavior of Nickel-based single crystal superalloy dovetail specimen in contact with powder metallurgy pads at high temperature
24. Analysis of turbo impeller rotor failure10.1016/j.engfailanal.2016.02.012 ↗
25. A systematic study on the effects of shot peening on a mild carbon steel: Microstructure, mechanical properties, and axial fatigue strength of smooth and notched specimens10.1016/j.apsadv.2021.100071 ↗
26. Effects of rolled edges on the fatigue life of shot peened Inconel 71810.1016/j.jmatprotec.2018.08.019 ↗
27. Effect of compressive residual stress introduced by cavitation peening and shot peening on the improvement of fatigue strength of stainless steel10.1016/j.jmatprotec.2020.116877 ↗
28. Effect of cutting process on the residual stress and fatigue life of the welded joint treated by ultrasonic impact treatment10.1016/j.ijfatigue.2020.105998 ↗
29. Residual stress and microstructure effects on fatigue crack growth in AA2050 friction stir welds10.1016/j.ijfatigue.2007.04.016 ↗
30. The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024–T351 aluminum joints10.1016/S0142-1123(02)00038-5 ↗