Creep-plasticity-fatigue calculations in the design of porous double layers for new transpiration cooling systems
Source abstract
Abstract
Abstract New porous double layer (PDL) transpiration cooling technologies can allow gas turbine entry temperatures to be increased beyond current limits towards higher engine efficiency. However, PDL systems require inclined film holes with stress concentration factors in excess of 3.8. Combination of thermoelastic Finite Element (FE) analysis with Neuber type local strain approaches gives similar cyclic strain range predictions with cyclic plasticity-creep FE analysis. Fatigue crack initiation at film holes occurs with a low number of cycles due to excessive plasticity. Our study establishes links between elastic-inelastic analyses and between material phenomena-PDL geometry and indicates pathways of improving life.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aerodynamics and Fluid Dynamics Research · Turbomachinery Performance and Optimization · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Tensile behavior of a new single-crystal nickel-based superalloy (CMSX-4) at room and elevated temperatures10.1007/BF02654502 ↗
2. Stress relaxation behavior in single crystal superalloys10.1016/j.msea.2015.05.102 ↗
3. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
4. Thermo-mechanical fatigue characteristics of CMSX-4 applied to the high-pressure turbine first-stage single-crystal rotor blade10.1007/s12206-020-0406-y ↗
5. A review of gas turbine effusion cooling studies10.1016/j.ijheatmasstransfer.2013.07.071 ↗
6. Effects of compound angle on film cooling effectiveness considering endwall lateral pressure gradient
7. High Resolution Experimental and Computational Methods for Modelling Multiple Row Effusion Cooling Performance
8. Reed RC. The superalloys: fundamentals and applications. Cambridge university press; 2008.
9. Broomfield RW, et al. Development and turbine engine performance of three advanced rhenium containing superalloys for single crystal and directionally solidified blades and vanes; 1998.10.1115/97-GT-117 ↗
10. Large eddy simulation of compound angle hole film cooling with hole length-to-diameter ratio and internal crossflow orientation effects10.1016/j.ijthermalsci.2017.08.001 ↗
11. A three-dimensional conjugate approach for analyzing a double-walled effusion-cooled turbine blade10.1115/1.4041379 ↗
12. Murray · 2019
13. Cerminara · 2019 · 263
14. Designing against severe stresses at compound cooling holes of double wall transpiration cooled engine components10.1016/j.ast.2021.106856 ↗
15. Minimising stresses in double wall transpiration cooled components for high temperature applications
16. 2D and 3D thermoelastic phenomena in double wall transpiration cooling systems for gas turbine blades and hypersonic flight10.1016/j.ast.2021.106610 ↗
17. Analysis of the Thermomechanical Stresses in Double-Wall Effusion Cooled Systems10.1115/1.4046268 ↗
18. The influence of transient thermal loading on the Bree plate; A simplified method of analysis10.1016/0029-5493(84)90275-9 ↗
19. A constitutive model for anisotropic materials based on Neuber’s rule10.1016/S0045-7825(03)00415-8 ↗
20. A simplified creep-reverse plasticity solution method for bodies subjected to cyclic loading10.1016/j.euromechsol.2004.04.003 ↗
21. Effect of skew angle of holes on the thermal fatigue behavior of a Ni-based single crystal superalloy10.1007/s40195-016-0514-y ↗
22. Large eddy simulation of unsteady turbulent flow structures and film-cooling effectiveness in a laidback fan-shaped hole10.1016/j.ast.2020.105793 ↗
23. Neuber H. Theory of stress concentration for shear-strained prismatical bodies with arbitrary nonlinear stress-strain law; 1961.10.1115/1.3641780 ↗
24. A method of elastic-plastic stress and strain calculation at a notch root10.1016/0025-5416(81)90089-6 ↗
25. A combined high and low cycle fatigue model for life prediction of turbine blades10.3390/ma10070698 ↗
26. Power-exponent function model for low-cycle fatigue life prediction and its applications–Part II: Life prediction of turbine blades under creep–fatigue interaction10.1016/j.ijfatigue.2006.03.005 ↗
27. Thermal-Mechanical Life Prediction System for Anisotropic Turbine Components
28. Numerical investigations of crack initiation in impulse steam turbine rotors subject to thermo-mechanical fatigue10.1016/j.applthermaleng.2018.04.099 ↗
29. Linear Matching Method on the evaluation of plastic and creep behaviours for bodies subjected to cyclic thermal and mechanical loading10.1002/nme.1693 ↗
30. 6.14 Documentation
31. An Integrated Conjugate Computational Approach for Evaluating the Aerothermal and Thermomechanical Performance of Double-Wall Effusion Cooled Systems
32. Skamniotis C, Cocks AC. Multiscale analysis of thermomechanical stresses in double wall transpiration cooling systems for gas turbine blades; 2021 [To appear].10.1016/j.ijmecsci.2021.106657 ↗
33. Welding of Single Crystal Superalloy CMSX-4: Experiments and Modeling
34. Computational modeling of multiaxial elasto-plastic stress–strain response for notched components under non-proportional loading10.1016/j.ijfatigue.2013.10.008 ↗
35. Modeling of mechanical properties of alloy CMSX-410.1016/j.msea.2008.04.103 ↗
36. A study of the effects of cyclic thermal stresses on a ductile metal
37. The exponential law of endurance tests
38. Karadeniz S, Ponter A, Carter K. The plastic ratcheting of thin cylindrical shells subjected to axisymmetric thermal and mechanical loading. J Press Vessel Technol 1987;109(4):387–93.10.1115/1.3264921 ↗
39. Influence of strain estimation methods on life predictions using the local strain approach10.1016/S0142-1123(00)00042-6 ↗
40. Stress-strain analysis and life predictions of a notched shaft under multiaxial loading
41. The application of fracture mechanics to life prediction of cooling hole configurations in thermal-mechanical fatigue10.1016/0013-7944(77)90049-2 ↗
42. In-situ observation of crack initiation and propagation in Ni-based superalloy with film cooling holes during tensile test10.1016/j.jallcom.2019.04.139 ↗
43. A combined CP theory and TCD for predicting fatigue lifetime in single-crystal superalloy plates with film cooling holes10.1016/j.ijfatigue.2018.02.020 ↗
44. Prediction method for creep life of thin-wall specimen with film cooling holes in Ni-based single-crystal superalloy10.1016/j.ijmecsci.2018.04.018 ↗
45. The inter-hole interference on creep deformation behavior of nickel-based single crystal specimen with film-cooling holes10.1016/j.ijmecsci.2019.105090 ↗
46. Skamniotis C, Cocks AC. Thermal and centrifugal stresses in curved double wall transpiration cooled components with temperature dependent thermoelastic properties; 2021 [To appear].10.1016/j.ijmecsci.2020.105983 ↗
47. Viscoplastic analysis method of an aeroengine turbine blade subjected to transient thermo-mechanical loading10.1016/j.ijmecsci.2019.01.007 ↗
48. The plastic behaviour of components subjected to constant primary stresses and cyclic secondary strains10.1243/03093247V201007 ↗
49. A unified direct method for ratchet and fatigue analysis of structures subjected to arbitrary cyclic thermal-mechanical load histories10.1016/j.ijmecsci.2020.106190 ↗
50. Structural analysis of gas turbine blades made of Mo-Si-B under transient thermo-mechanical loads10.1016/j.commatsci.2019.04.023 ↗
51. Detection and numerical analysis of the most efforted places in turbine blades under real working conditions10.1016/j.commatsci.2012.02.048 ↗
52. Effects of natural frequencies on the failure of R1 compressor blades10.1016/j.engfailanal.2012.05.013 ↗
53. Shakedown and limit analyses for 3-D structures using the linear matching method10.1016/S0308-0161(01)00052-7 ↗
54. A statistically consistent fatigue damage model based on Miner’s rule10.1016/j.ijfatigue.2013.04.006 ↗