Influence of non-metallic inclusions on the high cycle fatigue strength of steels
Source abstract
Abstract
Dans le présent article, un critère d'évaluation de la fatigue des aciers à haute résistance est proposé, où l'influence des inclusions non métalliques sur la résistance à la fatigue est prise en compte. À cette fin, le critère de Carpinteri et al. est utilisé conjointement avec le modèle de paramètre de surface de Murakami et Yanase. Une campagne expérimentale disponible dans la littérature est analysée pour évaluer la précision du critère.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Mechanical Failure Analysis and Simulation · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Kiessling · 1978
2. Formation of white etching cracks at manganese sulfide (MnS) inclusions in bearing steel due to hammering impact loading10.1002/we.1958 ↗
3. An updated review: white etching cracks (WECs) and axial cracks in wind turbine gearbox bearings10.1080/02670836.2015.1133022 ↗
4. Initiation of sub-surface micro-cracks and white etching areas from debonding at non-metallic inclusions in wind turbine gearbox bearing10.1016/j.wear.2018.03.008 ↗
5. Finite element simulation of subsurface initiated damage from non-metallic inclusions in wind turbine gearbox bearings10.1016/j.ijfatigue.2019.105347 ↗
6. Failure analysis of a secondary driving helical gear in transmission of electric vehicle10.1016/j.engfailanal.2020.104934 ↗
7. Failure Analysis of a Gearbox of a Conveyor Belt10.1007/s11668-020-00928-4 ↗
8. A pragmatic approach to predict fatigue strength concerning the short crack behavior in VHCF10.1016/j.ijfatigue.2020.105561 ↗
9. Study of the influence of alloying elements on the mechanical characteristics and wear behavior of a ductile cast iron10.3221/IGF-ESIS.56.06 ↗
10. Fatigue life analysis of wind turbine gear with oxide inclusion10.1111/ffe.13393 ↗
11. Broad review of “White Etching Crack” failure in wind turbine gearbox bearings: Main factors and experimental investigations10.1016/j.ijfatigue.2020.106091 ↗
12. Structural collapse calculations of old pipelines10.1016/S0142-1123(97)00100-X ↗
13. Fatigue assessment of an electrical resistance welded oil pipeline10.1016/S0142-1123(01)00111-6 ↗
14. Effect of Non-Metallic Inclusion Chemical and Phase Composition on Corrosion Resistance of Carbon and Low Alloy Steels in Water Media Typical for Oilfield Pipeline Operating Conditions10.1007/s11015-019-00881-0 ↗
15. Synergistic action of hydrogen gas and weld defects on fracture toughness of X80 pipeline steel10.1016/j.ijfatigue.2018.10.021 ↗
16. Numerical study of semi-elliptical cracks in the critical position of pipe elbow10.3221/IGF-ESIS.49.44 ↗
17. Material defects as cause for the fatigue failure of metallic components10.1016/j.ijfatigue.2019.06.024 ↗
18. Probabilistic elastic-plastic fracture mechanics analysis of propagation of cracks in pipes under internal pressure10.3221/IGF-ESIS.54.15 ↗
19. Role of Nonmetallic Inclusions in Premature Stress-Corrosion Fractures of Drill Pipes10.1007/s11003-020-00375-4 ↗
20. The influence of the pipelines operation term in aggressive environments on the gas content and structure of structural steels10.4028/www.scientific.net/SSP.313.136 ↗
21. Prediction of spatial distribution of the composition of inclusions on the entire cross section of a linepipe steel continuous casting slab10.1016/j.jmst.2020.05.035 ↗
22. Analysis of the reasons for the accelerated failure of oil pipelines in the regions of the Far North and Siberia10.1051/e3sconf/202122506001 ↗
23. Shapovalov A.N., Dema R.R., Nefed'ev S.P., Experience of using complex modifiers to increase corrosion resistance of pipe steels. Solid State Phenomena, 2021; 316 SSP: 369-374. ISBN 978-303573650-2.10.4028/www.scientific.net/SSP.316.369 ↗
24. Embrittlement of welded joints of tram rails in city environments10.1016/j.engfailanal.2017.12.011 ↗
25. A new proposed Weibull distribution of inclusion size and its correlation with rolling contact fatigue life of an extra clean bearing steel10.1016/j.ijfatigue.2019.04.031 ↗
26. Effect of superimposed compressive stresses on rolling contact fatigue initiation at hard and soft inclusions10.1016/j.ijfatigue.2019.105399 ↗
27. Influence of steel cleanliness and heat treatment conditions on rolling contact fatigue of 100Cr610.1016/j.wear.2019.04.026 ↗
28. Microstructural analysis and fatigue fracture behavior of rail steel10.1080/15376494.2018.1472339 ↗
29. Increasing the Efficiency of Refining Rail Steel in Intermediate CCM Ladles Based on Rational Organization of Hydrodynamic Processes10.3103/S0967091220050101 ↗
30. Subsurface crack propagation from internal defect in rolling contact fatigue of railway wheel steel10.2320/matertrans.Z-M2020860 ↗
31. Finite element study of cyclic plasticity near a subsurface inclusion under rolling contact and macro-residual stresses10.1016/j.ijfatigue.2020.105981 ↗
32. Roles of microstructure, inclusion, and surface roughness on rolling contact fatigue of a wind turbine gear10.1111/ffe.13199 ↗
33. Crankshaft failure and why it may happen again10.1007/BF02715199 ↗
34. Marine main engine crankshaft failure analysis: A case study10.1016/j.engfailanal.2008.10.013 ↗
35. Failure analysis of commercial vehicle crankshaft: A case study10.4028/www.scientific.net/AMM.192.78 ↗
36. Fracture analysis of a crankshaft used for heavy-duty truck10.4028/www.scientific.net/AMM.654.61 ↗
37. Failure analysis of four-cylinder diesel engine crankshaft10.1007/s40430-018-1536-3 ↗
38. Detection and analysis of magnetic particle testing defects on heavy truck crankshaft manufactured by microalloyed medium-carbon forging steel10.1007/s42243-019-00334-7 ↗
39. Effect of inclusion size on fatigue properties in very high cycle region of low alloy steel used for solid-type crankshaft
40. Evaluation of high-cycle bending fatigue and fracture behaviors in EN-GJS700-2 ductile cast iron of crankshafts10.1016/j.engfailanal.2017.12.017 ↗
41. Fatigue crack propagation behaviour derived from S-N data in very high cycle regime10.1046/j.1460-2695.2002.00547.x ↗
42. Notch effect on fatigue strength reduction of bearing steel in the very high cycle regime10.1016/j.ijfatigue.2005.04.017 ↗
43. Very high cycle fatigue properties of bearing steel under axial loading condition10.1016/j.ijfatigue.2008.11.001 ↗
44. Influence of non-metallic inclusions on the fatigue properties of heavily cold drawn steel wires10.1016/j.proeng.2010.03.019 ↗
45. Transition of fatigue failure mode of Ni-Cr-Mo low alloy steel in very high cycle regime10.1016/j.ijfatigue.2009.06.011 ↗
46. Multiaxial fatigue assessment of steels with non-metallic inclusions by means of adapted critical plane criteria10.1016/j.tafmec.2020.102585 ↗
47. Murakami · 2002
48. Multiaxial high cycle fatigue threshold with small defects and cracks10.1016/j.engfracmech.2014.03.017 ↗
49. A theory for the effect of mean stress on fatigue of metals under combined torsion and axial load or bending10.1115/1.4008327 ↗
50. A bi-parametric Wöhler curve for high cycle multiaxial fatigue assessment10.1046/j.1460-2695.2002.00462.x ↗
51. Critical Plane Orientation Influence on Multiaxial High-Cycle Fatigue Assessment10.1134/S1029959915040074 ↗
52. Estimation of fatigue strength under multiaxial cyclic loading by varying the critical plane orientation10.3221/IGF-ESIS.37.29 ↗
53. Estimation of fatigue life under multiaxial loading by varying the critical plane orientation10.1016/j.ijfatigue.2016.10.028 ↗
54. Multiaxial fatigue life evaluation of notched structural components: An analytical approach10.1002/mdp2.74 ↗
55. Crack initiation and life estimation for 316 and 430 stainless steel specimens by means of a critical plane approach10.1016/j.ijfatigue.2020.105677 ↗
56. Notch fatigue life estimation of Ti-6Al-4V10.1016/j.engfailanal.2020.105098 ↗
57. Murakami Y., Fukuda S., Endo T., Effect of Micro-hole on Fatigue Strength 1st Report, Effect of Micro-hole : Dia. : 40 / 50 / 80 / 100 & 200μm) on the Fatigue Strength of 0.13% and 0.46% Carbon Steels. Transactions of the Japan Society of Mechanical Engineers Series I, 1978; 44: 4003-4013. DOI 10.1299/kikai1938.44.4003.10.1299/kikai1938.44.4003 ↗
58. A Geometrical Parameter for the Quantitative Estimation of the Effects of Small Defects on Fatigue Strength of Metals10.1299/kikaia.49.127 ↗
59. Quantitative Evaluation of Effects of Nonmetallic Inclusions on Fatigue Strength of High Strength Steel10.1299/kikaia.54.688 ↗
60. Effects of hardness and crack geometry on ΔKth of small cracks10.2472/jsms.35.911 ↗
61. Some Properties of Ultra Clean Spring Steel10.5346/trbane.1985.11 ↗
62. On the characterization of the critical plane with a simple and fast alternative measure of the shear stress amplitude in multiaxial fatigue10.1016/j.ijfatigue.2011.01.002 ↗
63. An alternative approach to calibrate multiaxial fatigue models of steels with small defects10.1016/j.prostr.2019.12.004 ↗
64. The use of a modified critical plane model to assess multiaxial fatigue of steels with nonmetallic inclusion10.1051/matecconf/201930016005 ↗