An engineering estimation of fatigue thresholds from a microstructural size and Vickers hardness: application to wrought and additively manufactured metals
Source abstract
Abstract
Abstract A novel empirical bi-parametric model based on the Vickers hardness HV and a microstructural length parameter, l, is proposed to estimate the fully-reversed threshold-Stress Intensity Factor for long cracks. The model was calibrated on fatigue data of wrought alloys taken from the literature and then extended to additively manufactured (AMed) metals. Experimental results, generated from testing AMed maraging steel 300 specimens containing natural defects as well as taken from the literature, were compared successfully with the estimation based on the El-Haddad model defined solely on the basis of the HV and l.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. Additive manufacturing of Al alloys and aluminium matrix composites (AMCs)
2. Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition10.1016/j.actamat.2014.11.028 ↗
3. Damage evolution and failure mechanisms in additively manufactured stainless steel10.1016/j.msea.2015.10.073 ↗
4. Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing10.1016/j.actamat.2016.03.019 ↗
5. Metal additive manufacturing: a review of mechanical properties10.1146/annurev-matsci-070115-032024 ↗
6. Plastic anisotropy of additively manufactured maraging steel: influence of the build orientation and heat treatments
7. Analysis of defect generation in Ti-6Al-4V parts made using powder bed fusion additive manufacturing processes
8. Critical assessment of the fatigue performance of additively manufactured Ti-6Al-4V and perspective for future research10.1016/j.ijfatigue.2015.12.003 ↗
9. Additive manufacturing of fatigue resistant materials: challenges and opportunities10.1016/j.ijfatigue.2017.01.001 ↗
10. Influence of defects on axial fatigue strength of maraging steel specimens produced by additive manufacturing10.1051/matecconf/201816502005 ↗
11. Fatigue of additively manufactured 316L stainless steel: the influence of porosity and surface roughness10.1111/ffe.13077 ↗
12. A review on the fatigue behavior of Ti-6Al-4V fabricated by electron beam melting additive manufacturing10.1016/j.ijfatigue.2018.09.022 ↗
13. The influence of additive manufacturing processing parameters on surface roughness and fatigue life10.1016/j.ijfatigue.2019.03.025 ↗
14. Cyclic deformation and fatigue behavior of additively manufactured 17–4 PH stainless steel10.1016/j.ijfatigue.2019.02.006 ↗
15. Fatigue characteristics of steels manufactured by selective laser melting10.1016/j.ijfatigue.2018.12.029 ↗
16. Orientation dependent fatigue performance and mechanisms of selective laser melted maraging steel X3NiCoMoTi18-9-510.1016/j.ijfatigue.2019.06.025 ↗
17. Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing10.1016/j.actamat.2014.12.054 ↗
18. Fabrication of large Ti-6Al-4V structures by direct laser deposition10.1016/j.jallcom.2014.12.234 ↗
19. Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing10.1016/j.matdes.2016.01.099 ↗
20. Murakami · 2019
21. Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17–4 PH stainless steel10.1016/j.ijfatigue.2016.03.014 ↗
22. Fatigue performance evaluation of selective laser melted Ti-6Al-4V10.1016/j.msea.2014.01.041 ↗
23. Anisotropic high cycle fatigue behavior of Ti-6Al-4V obtained by powder bed laser fusion10.1016/j.ijfatigue.2016.04.032 ↗
24. Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): microstructure, high cycle fatigue, and fracture behavior10.1016/j.matdes.2011.07.067 ↗
25. Significance of hot isostatic pressing (HIP) on multiaxial deformation and fatigue behaviors of additive manufactured Ti-6Al-4V including build orientation and surface roughness effects10.1016/j.ijfatigue.2018.07.035 ↗
26. Influence of the build orientation on the fatigue strength of EOS maraging steel produced by additive metal machine10.1111/ffe.12395 ↗
27. An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing10.1016/j.ijfatigue.2018.08.034 ↗
28. Influence of build orientation on static and axial fatigue properties of maraging steel specimens produced by additive manufacturing10.1016/j.prostr.2017.11.072 ↗
29. Effects of build orientation on fatigue behavior of Ti-6Al-4V as-built specimens produced by direct metal laser sintering10.1016/j.prostr.2020.02.032 ↗
30. An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control
31. Microstructures of laser-deposited Ti-6Al-4V10.1016/j.matdes.2003.09.009 ↗
32. Fatigue crack propagation of short cracks10.1115/1.3443647 ↗
33. Prediction of non propagating cracks10.1016/0013-7944(79)90081-X ↗
34. Grain size effect on crack nucleation and growth in long-life fatigue of low-carbon steel
35. Fatigue threshold determination in high strength cold drawn eutectoid steel wires10.1016/0013-7944(87)90035-X ↗
36. Theoretical modelling of the effects of grain size on the threshold for fatigue crack growth10.1016/0956-7151(91)90222-M ↗
37. Application of a new model for fatigue threshold in a structural steel weldment10.1016/0013-7944(93)90253-O ↗
38. An experimental and theoretical approach for an estimation of DeltaKth10.1046/j.1460-2695.2000.00314.x ↗
39. A simple model to predict the very high cycle fatigue resistance of steels10.1016/j.ijfatigue.2010.12.010 ↗
40. Fracture mechanics and notch sensitivity10.1046/j.1460-2695.2003.00633.x ↗
41. A unified treatment of the mode i fatigue limit of components containing notches or defects10.1007/s10704-005-2183-0 ↗
42. Taylor D. The Theory of Critical Distances: a new perspective in fracture mechanics; 2007.10.1016/B978-008044478-9/50003-X ↗
43. ASTM E647-15: Standard Test Method for Measurement of Fatigue Crack Growth Rates; 2015:49.
44. Effect of small defects on the fatigue strength of martensitic stainless steels10.1016/j.ijfatigue.2019.06.021 ↗
45. Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing10.1016/j.ijfatigue.2018.07.020 ↗
46. Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting10.1016/j.ijfatigue.2018.08.002 ↗
47. On the critical inclusion size of high strength steels under ultra-high cycle fatigue10.1016/j.msea.2006.04.068 ↗
48. The influence of various types of small defects on the fatigue limit of precipitation-hardened 17–4PH stainless steel10.1016/j.tafmec.2016.10.003 ↗
49. Grain size effect on growth threshold for small surface-cracks and long through-cracks under cyclic loading
50. Elastic-plastic analysis of the fatigue limit for a material with small flaws10.1111/j.1460-2695.1979.tb01334.x ↗
51. Significance of the small crack growth law and its practical application10.1007/s11661-000-0228-6 ↗
52. Akiniwa Y, Tanaka K. Prediction of fatigue limits of engineering components containing small defects. In: Newman JC, Jr., Piascik RS, editors. Fatigue Crack Growth Threshold Endur Limits, Des ASTM STP 1372. Am Soc Test Mater West Conshohocken, PA; 2000:304–18.10.1520/STP13440S ↗
53. Nisitani H, Endo M. Unified Treatment of Deep and Shallow Notches in Rotating Bending Fatigue. Basic Quest. Fatigue Vol. I, vol. I, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International; 2009. p. 136-136–18. https://doi.org/10.1520/STP23214S.10.1520/STP23214S ↗
54. Non-damaging notches in fatigue10.1111/j.1460-2695.1986.tb00446.x ↗
55. Propagation and non-propagation of short fatigue cracks at a sharp notch10.1111/j.1460-2695.1983.tb00347.x ↗
56. High cycle fatigue and threshold behaviour of powder metallurgical mo and Mo-alloys10.1111/j.1460-2695.1979.tb01344.x ↗
57. Chen Q, Nagano T, Nakamura Y, Maeda Y, Kawagoishi N. Initiation and propagation behavior of a fatigue crack of maraging steel in high humidity. In: 13th Int. Conf. Fract. 2013, ICF 2013, Beijing, China; 2013. p. 775–83.
58. The influence of microstructure on the growth of small fatigue cracks10.1111/j.1460-2695.1985.tb01201.x ↗
59. The morphology and crystallography of lath martensite in alloy steels10.1016/j.actamat.2006.07.009 ↗
60. ASTM E466-15: Practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials. ASTM Int; 2015:1–6. https://doi.org/10.1520/E0466-15.2.
61. ASTM E92-17: Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials. ASTM Int; 2017:1–27.
62. ASTM E3-11: Stardard Guide for Preparation of metallographic specimens. ASTM Int; 2017:1–12.
63. Microstructure and mechanical properties of Selective Laser Melted 18Ni-300 steel10.1016/j.phpro.2011.03.033 ↗
64. Optimization of selective laser melting parameters and influence of post heat treatment on microstructure and mechanical properties of maraging steel10.1016/j.matdes.2017.11.042 ↗
65. ASTM E112-13: Standard test methods for determining average grain size. ASTM Int; 2013:1–28.
66. High cycle fatigue behavior and life prediction for additively manufactured 17–4 PH stainless steel: effect of sub-surface porosity and surface roughness10.1016/j.tafmec.2020.102477 ↗
67. Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17–4 PH stainless steel10.1016/j.matdes.2015.05.026 ↗
68. INTERNATIONAL STANDARD ISO 12107:2003. Metallic materials — Fatigue testing — Statistical planning and analysis of data. vol. 2006, n.d.
69. Yasa E, Kempen K, Kruth J, Thijs L, Van Humbeeck J. Microstructure and mechanical properties of maraging steel 300 after selective laser melting. In: Solid Freeform Fab Symp Proc 2010, Austin, Texas, USA. p. 383-96.10.1016/j.phpro.2011.03.033 ↗
70. Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel10.1016/j.optlastec.2014.07.021 ↗
71. Aging behaviour and mechanical performance of 18-Ni 300 steel processed by selective laser melting10.3390/met6090218 ↗
72. Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting10.1016/j.jallcom.2017.07.177 ↗
73. Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel10.1016/j.matdes.2017.08.026 ↗
74. Low-cycle fatigue behaviour of AISI 18Ni300 maraging steel produced by selective laser melting10.3390/met8010032 ↗
75. Steels in additive manufacturing: a review of their microstructure and properties
76. Effect of heat treatment on the fatigue crack growth behaviour in additive manufactured AISI 18Ni300 steel10.1016/j.tafmec.2019.04.005 ↗
77. Microstructure and mechanical behavior of 17–4 precipitation hardenable steel processed by selective laser melting10.1007/s11665-014-1226-y ↗
78. Additive manufacturing of 17–4 PH stainless steel: post-processing heat treatment to achieve uniform reproducible microstructure10.1007/s11837-015-1754-4 ↗
79. Crack propagation and fracture toughness of Ti6Al4V alloy produced by selective laser melting
80. Fatigue crack growth behavior and microstructural mechanisms in Ti-6Al-4V manufactured by laser engineered net shaping10.1016/j.ijfatigue.2016.08.009 ↗
81. Resistance of direct metal laser sintered Ti6Al4V alloy against growth of fatigue cracks10.1016/j.engfracmech.2017.03.033 ↗
82. Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting10.1016/j.ijfatigue.2016.05.001 ↗
83. Beyond the orthogonal: on the influence of build orientation on fatigue crack growth in SLM Ti-6Al-4V10.1016/j.ijfatigue.2018.06.038 ↗