Determination of Chaboche combined hardening parameters with dual backstress for ratcheting evaluation of AISI 52100 bearing steel
Source abstract
Abstract
Abstract This research proposes a method to obtain parameters of Chaboche combined hardening model for evaluating ratcheting phenomenon in metallic materials when cyclic loadings are applied. Finite element (FE) model is used for simulating ratcheting by changing Chaboche model parameters. Although Chaboche model with single term can describe the ratcheting characteristics, simulated stress - strain (σ-e) relation deviates from that of metallic materials when the applied alternative stress σa is smaller than the yield strength σo. Whereas, Chaboche model with dual backstress can simulate not only the ratcheting characteristics but also σ-e relation even when σa is smaller than σo. Finally, tensile and ratcheting experiments are conducted with bearing steel specimens (AISI 52100) to validate the proposed method for evaluation of ratcheting parameters and σ-e relations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. An empirical non-proportional cyclic plasticity approach under multiaxial low-cycle fatigue loading10.1016/j.ijmecsci.2018.04.031 ↗
2. A finite cyclic elasto-plastic constitutive model to improve the description of cyclic stress-strain hysteresis loops10.1016/j.ijplas.2017.04.009 ↗
3. Sensitivity and optimisation of the Chaboche plasticity model parameters in strain-life fatigue predictions10.1016/j.matdes.2017.01.027 ↗
4. Continuum approach for modeling fatigue in amorphous glassy polymers. applications to the investigation of damage-ratcheting interaction in polycarbonate10.1016/j.ijplas.2016.12.001 ↗
5. A failure assessment diagram for components subjected to rolling contact loading10.1016/j.ijfatigue.2009.06.016 ↗
6. Influence of non-proportional loading on ratcheting responses and simulations by two recent cyclic plasticity models10.1016/j.ijplas.2008.04.008 ↗
7. Multiaxial ratchetting–fatigue interactions of annealed and tempered 42CrMo steels: Experimental observations10.1016/j.ijfatigue.2008.06.002 ↗
8. Multiaxial ratcheting behavior of Inconel 718 at elevated temperature
9. Test and analysis of thermal ratcheting deformation for 316L stainless steel cylindrical structure10.3795/KSME-A.2002.26.3.479 ↗
10. The mechanism of rolling contact fatigue: an update10.1243/135065005X9808 ↗
11. Thermo-mechanically coupled cyclic elasto-viscoplastic constitutive model of metals: theory and application10.1016/j.ijplas.2015.12.005 ↗
12. An evaluation for several kinematic hardening rules on prediction of multiaxial stress-controlled ratchetting10.1016/j.ijplas.2009.10.002 ↗
13. Biaxial ratchetting with novel variations of kinematic hardening10.1016/j.ijplas.2010.06.002 ↗
14. Ratcheting assessment of steel samples under various non-proportional loading paths by means of kinematic hardening rules10.1016/j.matdes.2015.06.153 ↗
15. Ratchetting: recent progresses in phenomenon observation, constitutive modeling and application10.1016/j.ijfatigue.2007.10.002 ↗
16. A parametric study on Chaboche model to simulate metal ratcheting
17. Analysis of uniaxial ratcheting behavior and cyclic mean stress relaxation of a duplex stainless steel10.1016/j.ijplas.2014.06.008 ↗
18. Non-proportional multiaxial transformation ratchetting of super-elastic NiTi shape memory alloy: Experimental observations10.1016/j.mechmat.2013.12.003 ↗
19. Effects of peak stress and stress amplitude on multiaxial transformation ratchetting and fatigue life of superelastic NiTi SMA micro-tubes: experiments and life-prediction model10.1016/j.ijfatigue.2016.12.006 ↗
20. Visco-plastic constitutive modeling on Ohno-Wang kinematic hardening rule for uniaxial ratcheting behavior of Z2CND18.12N steel10.1016/j.ijplas.2011.06.001 ↗
21. An elastic-plastic analysis of spherical indentation: constitutive equations for single-indentation unloading and development of plasticity due to repeated indentation10.1016/j.mechmat.2014.05.005 ↗
22. Study of ratcheting by the indentation fatigue method with a flat cylindrical indenter Part II. finite element simulation10.1557/jmr.2007.0019 ↗
23. Thermal ratcheting of a P91 steel cylinder under an axial moving temperature distribution10.1016/j.jnucmat.2016.01.028 ↗
24. Effect of frequency of free level fluctuations and hold time on the thermal ratcheting behavior10.1016/j.ijpvp.2015.03.004 ↗
25. Thermal ratcheting of solder-bonded elastic and elastoplastic layers10.1016/j.ijplas.2007.12.008 ↗
26. Constitutive model for uniaxial time-dependent ratcheting of 6061–T6 aluminum alloy10.1016/j.commatsci.2011.06.015 ↗
27. A cyclic visco-plastic constitutive model for time-dependent ratchetting of particle-reinforced metal matrix composites10.1016/j.ijplas.2012.07.006 ↗
28. Constitutive modeling for uniaxial time-dependent ratcheting of SS304 stainless steel10.1016/j.mechmat.2006.08.004 ↗
29. Time-dependent ratchetting experiments of SS304 stainless steel10.1016/j.ijplas.2005.05.006 ↗
30. Constitutive equations for cyclic plasticity and cyclic viscoplasticity10.1016/0749-6419(89)90015-6 ↗
31. On the description of anisotropic work-hardening10.1016/0022-5096(67)90030-0 ↗
32. A mathematical representation of the multiaxial Bauschinger effect10.3184/096034007X207589 ↗
33. Kinematic hardening rules with critical state of dynamic recovery, Parts I and II10.1016/0749-6419(93)90042-O ↗
34. The theory of plasticity: a survey of recent achievements10.1243/PIME_PROC_1955_169_015_02 ↗
35. A modification of Prager’s hardening rule10.1090/qam/104405 ↗
36. Abaqus 6.13. Analysis User’s Manual, Dassault Systèmes. Simulia Corp, Providence, RI, USA 2013.
37. A review of some plasticity and viscoplasticity constitutive theories10.1016/j.ijplas.2008.03.009 ↗
38. Cyclic inelastic constitutive equations and their impact on the fatigue life predictions10.1016/j.ijplas.2012.01.010 ↗
39. Anatomy of coupled constitutive models for ratcheting simulation10.1016/S0749-6419(99)00059-5 ↗
40. Lemaitre · 1993
41. Simulation of ratcheting in wheel-rail contact
42. On the calibration of the Chaboche hardening model and a modified hardening rule for uniaxial ratcheting prediction10.1016/j.ijsolstr.2009.04.002 ↗
43. ASTM E8/E8M-09. Standard Test Methods for Tension Testing of Metallic Materials. ASTM International, West Conshohocken, PA 2009.
44. ASTM E606/E606M-12. Standard Test Method for Strain-Controlled Fatigue Testing. ASTM International, West Conshohocken, PA 2012.
45. On acquiring true stress-strain curves for sheet specimens using tensile test and FE analysis based on a local necking criterion10.1557/jmr.2014.24 ↗
46. Ratchetting under tension-torsion loadings: experiments and modelling10.1016/S0749-6419(99)00056-X ↗
47. Benchmark experiments and characteristic cyclic plasticity deformation10.1016/j.ijplas.2007.10.003 ↗
48. A unified constitutive model for cyclic viscoplasticity and its application to various stainless steels10.1115/1.3226490 ↗