A coupled 3D wear and fatigue numerical procedure: Application to fretting problems in ultra-high strength steel wires
Source abstract
Abstract
Abstract This work presents a coupled 3D wear and fatigue numerical procedure for fretting problems in ultra-high strength steel wires that combines Archard’s wear equation with the Smith–Watson–Topper parameter to predict crack nucleation. For total life prediction, a mode I crack propagation based on the weight function method was used. To assess fretting fatigue lifetime, several experimental campaigns were run. The numerical results were in good agreement with the fretting fatigue experimental results. Thus, this study provides a 3D numerical methodology to study the combined effects of wear and fatigue in fretting with a case study in ultra-high strength steel wires.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Vibration and Dynamic Analysis · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. On fretting maps10.1016/0043-1648(88)90134-2 ↗
2. Fretting wear10.1016/0043-1648(84)90008-5 ↗
3. Wear evolution in a stranded rope subjected to cyclic bending10.1007/s11665-007-9165-5 ↗
4. Development of a modular fretting wear and fretting fatigue tribometer for thin steel wires: Design concept and preliminary analysis of the effect of crossing angle on tangential force10.3390/met9060674 ↗
5. Feyrer · 2007
6. The fatigue failure of large diameter six strand wire rope10.1016/0142-1123(89)90001-7 ↗
7. Effect of broken wire on bending fatigue characteristics of wire ropes10.1016/j.ijfatigue.2017.06.024 ↗
8. Influence of the catenary parameter (H/w) on the fatigue life of overhead conductors10.1016/j.triboint.2016.11.004 ↗
9. New fatigue device for testing cables: Design and results10.1111/ffe.13022 ↗
10. Fretting wear of thin steel wires. Part 1: Influence of contact pressure10.1016/j.wear.2010.02.017 ↗
11. Fretting wear behaviors of steel wires under friction-increasing grease conditions10.1016/j.triboint.2010.10.021 ↗
12. Effect of torsion angle on tension-torsion multiaxial fretting fatigue behaviors of steel wires10.1016/j.ijfatigue.2017.09.021 ↗
13. Experimental study on fretting-fatigue of bridge cable wires
14. Experimental device for fretting fatigue tests in 6201 aluminum alloy wires from overhead conductors
15. Life prediction in multiaxial high cycle fretting fatigue
16. Fatigue of two contacting wires of the ACSR Ibis 397.5 MCM conductor: Experiments and life prediction10.1016/j.ijfatigue.2019.05.033 ↗
17. Shear driven crack arrest investigation under compressive state: prediction of fretting fatigue failure of aluminium strands10.1016/j.ijfatigue.2020.105589 ↗
18. A multi-scale strategy to predict fretting-fatigue endurance of overhead conductors
19. Finite element simulation of fretting wear and fatigue in thin steel wires10.1016/j.ijfatigue.2013.04.025 ↗
20. Fatigue strength and surface quality of eutectoid steel wires10.1016/S0142-1123(98)00082-6 ↗
21. Short crack propagation in eutectoid steel wires10.1016/0142-1123(96)00014-X ↗
22. Fatigue limit and fatigue life prediction in high strength cold drawn eutectoid steel wires10.1111/j.1460-2695.1989.tb00506.x ↗
23. Finite element modeling and experimental validation of fretting wear scars in thin steel wires10.1016/j.wear.2012.04.018 ↗
24. Finite element modeling of fretting wear scars in the thin steel wires: Application in crossed cylinder arrangements10.1016/j.wear.2014.06.019 ↗
25. A coupled crack initiation and propagation numerical procedure for combined fretting wear and fretting fatigue lifetime assessment10.1016/j.tafmec.2019.03.005 ↗
26. Finite element simulation and experimental validation of fretting wear10.1016/j.wear.2003.07.001 ↗
27. A combined wear and crack nucleation–propagation methodology for fretting fatigue prediction10.1016/j.ijfatigue.2008.01.002 ↗
28. Multiscale analysis of the effect of roughness on fretting wear10.1016/j.triboint.2017.02.024 ↗
29. A dynamical FEA fretting wear modeling taking into account the evolution of debris layer10.1016/j.wear.2018.07.018 ↗
30. A multilayer nodes update method in FEM simulation of large depth fretting wear10.1016/j.wear.2012.12.038 ↗
31. Llavori · 2016
32. Fretting fatigue crack nucleation: A review10.1016/j.triboint.2018.01.029 ↗
33. Fretting: Review on the numerical simulation and modeling of wear, fatigue and fracture
34. Early fretting crack orientation by using the critical plane approach10.1016/j.ijfatigue.2018.04.015 ↗
35. On the use of multiaxial fatigue criteria for fretting fatigue life assessment10.1016/j.ijfatigue.2007.02.018 ↗
36. Stability of critical distance approach to predict fretting fatigue cracking: A “ℓ opt -b opt” concept10.1016/j.ijfatigue.2015.07.016 ↗
37. A stress-strain function for the fatigue of metals
38. Contact-evolution based prediction of fretting fatigue life: effect of slip amplitude10.1016/j.wear.2006.11.004 ↗
39. Cumulative damage in fatigue10.1115/1.4009458 ↗
40. Madge · 2008
41. Taylor · 2010
42. Nucleation and early crack path in fretting fatigue10.1016/j.ijfatigue.2016.12.028 ↗
43. On the use of the theory of critical distances with mesh control for fretting fatigue lifetime assessment10.1016/j.triboint.2019.105985 ↗
44. Numerical analysis of the influence of micro-voids on fretting fatigue crack initiation lifetime10.1016/j.triboint.2019.02.032 ↗
45. The minimum shear stress range criterion and its application to crack orientation prediction in incomplete contact fretting problems10.1016/j.ijfatigue.2019.105223 ↗
46. Critical analysis of the suitability of crack propagation direction criteria for 2D cylindrical plain fretting contact10.1016/j.engfracmech.2019.04.035 ↗
47. A global-local fretting analysis methodology and design study for the pressure armour layer of dynamic flexible marine risers10.1016/j.triboint.2019.105967 ↗
48. Tribology International Prediction of fretting fatigue crack initiation and propagation lifetime for cylindrical contact con fi guration10.1016/j.triboint.2014.02.017 ↗
49. Weighted averaged stress intensity factors of circular-fronted cracks in cylindrical bars10.1111/j.1460-2695.1987.tb00460.x ↗
50. Abaqus2Matlab: A suitable tool for finite element post-processing10.1016/j.advengsoft.2017.01.006 ↗
51. Critical analysis of coefficient of friction derivation methods for fretting under gross slip regime
52. Statistical evaluation of strain-life fatigue crack initiation predictions10.1016/j.ijfatigue.2003.10.003 ↗
53. Influence of the load ratio on the threshold stress intensity factor range for heavily drawn steel wires10.1016/j.engfailanal.2010.11.008 ↗
54. A fracture mechanics approach to fatigue of heavily drawn steel wires10.1016/j.proeng.2011.04.538 ↗
55. On the role of contact and system stiffness in the measurement of principal variables in fretting wear testing10.3390/s20154152 ↗
56. Fretting wear of thin steel wires. Part 2: Influence of crossing angle10.1016/j.wear.2011.04.012 ↗
57. Análisis micro- y macroscópico de la fractura anisótropa en aceros eutéctoides progresivamente trefilados
58. The fatigue threshold, surface condition and fatigue limit of steel wire10.1016/0142-1123(85)90051-9 ↗
59. A probabilistic interpretation of the miner number for fatigue life prediction10.3221/IGF-ESIS.30.40 ↗
60. Study of size effects in fretting fatigue10.1016/j.triboint.2019.106087 ↗
61. Socie · 2000