Effect of aging state on fatigue property of wrought aluminum alloys
Source abstract
Abstract
The high-cycle fatigue (HCF) behaviors of wrought Al alloys are vitally important for their industrial application. To optimize the fatigue property of the wrought Al alloy, the effects of aging conditions on the fatigue properties of 7N01, 7075 and 2024 Al alloys were studied. The results show that the overaged samples have the lowest tensile strength among the three aging states, but their fatigue strength is the highest. Further investigations on the dislocation morphologies indicates that the dislocations are easy to accumulate and annihilate at the second phase boundaries for the overaged state, which reduces the fatigue damage degree at the grain boundaries. Besides, the discontinuous distribution of the grain boundary precipitates and the increased width of the precipitate-free zone also contributed to the improved fatigue property of the overaged state. Those results should be significantly important for the optimization of their fatigue properties and the industrial application of wrought Al alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Progress in structural materials for aerospace systems10.1016/j.actamat.2003.08.023 ↗
2. Residual stress reduction in 7175–T73, 6061–T6 and 2017A–T4 aluminum alloys using quench factor analysis10.1016/j.jmatprotec.2004.04.065 ↗
3. Influence of cooling rate on the precipitation microstructure in a medium strength Al-Zn-Mg alloy10.1016/j.msea.2008.09.067 ↗
4. Effect of three-stage homogenization on mechanical properties and stress corrosion cracking of Al-Zn-Mg-Zr alloys10.1016/j.msea.2016.08.071 ↗
5. Improving the fatigue strength of A7N01 aluminum alloy by adjusting Si content10.1016/j.msea.2018.10.085 ↗
6. The Mechanisms and mechanisms of fracture in stress corrosion cracking of aluminum alloy10.1016/0013-7944(93)E0027-Z ↗
7. Influence of temperature on cyclic stress response, strain resistance, and fracture behaviour of aluminum alloy 252410.1016/S0921-5093(00)01912-2 ↗
8. Twinning and orientation relationships of T-phase precipitates in an Al matrix10.1007/s10853-012-7102-y ↗
9. Kinetics and fracture behavior under cycle loading of AA2139 alloy belonging to Al-Cu-Mg-Ag system10.1134/S0031918X16050069 ↗
10. 1998
11. A micro-cell model of the effect of microstructure and defects on fatigue resistance in cast aluminum alloys10.1016/j.actamat.2004.07.035 ↗
12. Particle size, volume fraction and matrix strength effects on fatigue behavior and particle fracture in 2124 aluminum-SiCp composites10.1016/0921-5093(94)90891-5 ↗
13. Cyclic slip irreversibilities and the evolution of fatigue damage10.1007/s11661-009-9839-8 ↗
14. Murakami · 2002
15. Materials: engineering, science, processing and design
16. Shu · 2007
17. Frorrest · 1962
18. Lee · 2005
19. Formation of the science of fatigue of metals, Part 1. 1825-187010.1007/s11003-006-0132-3 ↗
20. Nanoparticle additions promote outstanding fracture toughness and fatigue strength in a cast Al-Cu alloy10.1016/j.matdes.2019.108221 ↗
21. Microstructure and properties of 2024 aluminum alloy in different aging States
22. Improving the fatigue strength of 7075 alloy through aging10.1016/j.msea.2018.09.047 ↗
23. Fatigue crack growth of AA2219 under different aging conditions10.1016/j.msea.2011.01.055 ↗
24. Effect of aging treatments on the kinetics of fatigue crack growth in 7010 aluminum alloy
25. Effect of prolonged heating at 130 ℃ on fatigue crack propagation of 2024 Al alloy in three orientations10.1016/S0921-5093(98)00504-8 ↗
26. The grain boundary geometry for optimum resistance to growth of short fatigue cracks in high strength Al-alloys10.1016/j.ijfatigue.2005.06.021 ↗
27. Effect of aging state on fatigue process and fracture characteristics of Al-Mg-Si-Cu alloy
28. Effect of the aging state on fatigue properties of 7020 aluminum alloy
29. Training high-strength aluminum alloys to withstand fatigue10.1038/s41467-020-19071-7 ↗
30. Shi · 2005
31. The effect of artificial aging on tensile work hardening characteristics of a cast Al-7%Si-0.55%Mg (A357) alloy10.1007/s11661-008-9611-5 ↗
32. Ageing and work-hardening behaviour of a commercial AA7108 aluminium alloy10.4028/www.scientific.net/MSF.618-619.555 ↗
33. Microstructure and properties of 7N01 aluminum alloy with single aging at 120 ℃
34. The influence of heat treatments on the microstructure and the mechanical properties in commercial 7020 alloys10.1016/j.msea.2014.12.040 ↗
35. The different dependencies of the mechanical properties and microstructures on hot extrusion and artificial aging processing in case of the alloys Al 7108 and Al 717510.1016/j.jmatprotec.2016.02.012 ↗
36. Decomposition processes in Al-Zn-Mg alloys10.1007/BF00541825 ↗
37. Microstructural evolution of 7012 alloy during the early stages of artifcial ageing10.1016/S1359-6454(99)00315-8 ↗
38. GP-zones in Al-Zn-Mg alloys and their role in artifcial aging10.1016/S1359-6454(01)00251-8 ↗
39. Comments on “cluster hardening in an aged Al-Cu-Mg alloy”10.1016/S1359-6462(98)00365-0 ↗
40. Origins of hardening in aged Al-Cu-Mg-(Ag) alloys10.1016/S1359-6454(97)00039-6 ↗
41. Role of vacancy-solute complex in the initial rapid age hardening in an Al-Cu-Mg alloy10.1016/S1359-6454(00)00348-7 ↗
42. The origins of room temperature hardening of Al-Cu-Mg alloys10.1016/j.msea.2004.01.085 ↗
43. The analysis of Al-based alloys by calorimetry: Quantitative analysis of reactions and reaction kinetics10.1179/095066004225010532 ↗
44. Precipitates and intermetallic phases in precipitation hardening Al-Cu-Mg-(Li) based alloys10.1179/174328005X14357 ↗
45. Effect of aging on mixed-mode I/III fracture toughness of 2034 aluminum alloys10.1016/1359-6454(95)00223-5 ↗
46. The effect of microstructure on the fatigue crack growth behaviour of an AI-Zn-Mg-(Zr) alloy10.1007/BF00023328 ↗
47. Effect of microstructure on tensile and fatigue properties of laser-welded DP780 and DP980 high-strength steel joints10.1016/j.msea.2019.03.062 ↗
48. Frorrest · 1963
49. Enhanced cyclic deformation responses of ultrafine-grained Cu and nanocrystalline Cu-Al alloys10.1016/j.actamat.2014.04.053 ↗
50. Improved fatigue strengths of nano-crystalline Cu and Cu-Al alloys10.1080/21663831.2015.1029645 ↗
51. High-cycle fatigue crack initiation and propagation behavior of high-strength spring steel wires
52. Microstructural effects on the small fatigue crack behavior of an aluminum alloy plate
53. The role of inclusions in fatigue crack initiation in an aluminum alloy
54. Grosskreutz JC, Shaw GG. Critical Mechanisms in the Development of Fatigue Cracks in 2024-T4 Aluminum, 1968.
55. Fatigue crack initiation and micro-crack growth in 2024–T4 and 2124–T4 aluminum alloys10.1007/BF02658324 ↗
56. DeBartolo EA, Hillberry BM. Characterization of fatigue crack nucleation sites in 2040-T3 aluminum alloy, Fatigue 99, in: Proceedings of the Seventh International Fatigue Congress, (Beijing, China, 1999).
57. Newman JC. Fracture mechanics parameters for small fatigue cracks, In: Small Crack Test Methods, ASTM STP 1149, Larsen, JM, Allison JE, editors. (American Society for Testing and Materials, Philadclphia,1992).10.1520/STP15062S ↗
58. Grain boundary effects on cyclic deformation and fatigue damage10.1016/j.pmatsci.2008.06.001 ↗
59. Microstructure and fatigue crack growth in a γ-Fe-Ni-Al Alloy10.1016/0001-6160(76)90104-8 ↗
60. Effects of precipitates on fatigue crack growth rate of AA 7055 aluminum alloy10.1016/S1003-6326(10)60630-9 ↗
61. Revisiting the role of prestrain history in the mechanical properties of ultrafne-grained CoCrFeMnNi high-entropy alloy10.1016/j.msea.2020.140398 ↗
62. Assessment of geometrically necessary dislocation levels derived by 3D EBSD10.1016/j.actamat.2015.06.051 ↗
63. On a novel strain indicator based onuncorrelated misorientation angles for correlating dislocation density to local strength10.1016/j.actamat.2018.03.009 ↗